• 한국해양공학회지
• /
• 제31권3호
• /
• pp.208-218
• /
• 2017

The performance of a wave energy converter (WEC) that uses the rolling motion of a partially submerged pendulum plate in front of a quay wall was analyzed. The wave exciting moment and hydrodynamic moment were obtained using a matched eigenfunction expansion method (MEEM) based on the linear potential theory, and then the roll motion response of a pendulum plate, time averaged extracted power, and efficiency were investigated. The optimal PTO damping coefficient was suggested to give the optimal extracted power. The peak value of the optimal extracted power occurs at the resonant frequency. The resonant peak and its width increase as the submergence depth of the pendulum plate decreases and thickness of the pendulum plate increases. An increase in the wave incidence angle reduces the efficiency of the wave energy converter. In addition, the WEC using a rolling pendulum plate contributes not only to the extraction of the wave energy, but also to a reduction in the waves reflected from the quay wall, which helps to stabilize ships going near the quay wall.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.17-23
• /
• 2013

Recently so much attention has been focused on renewable energy and, since its sources to exploit are already almost saturated in the country, the practical alternative to this situation could be a micro-turbine which uses the low head and low flow. From a point of view of local micro-turbine design capacity and manufacturing technology, the problems such as the accumulation of technical skills, the expansion of related industries, the national policy expansion and the turbine efficiency to improve are still vulnerable and it's true that there are also negative views about the economic feasibility, the technicity and the operation management of the micro-turbine. However, if the improvement can be done in technology of low-head double regulation micro-turbine to generate more outputs and the operation management can be reliably realized, the micro-turbine will be re-evaluated as an appliable source of renewable energy, even the output is small, and by a paradigm shift, it could realize a power generation as an economic and rational system.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.24-32
• /
• 2020

A self-blast type gas circuit breaker has been studied in this study to improve efficiency of interrupting performance of short line fault(SLF). Hot gas flows of gas circuit breaker have been simulated to evaluate interruption performance using CFD. Design parameters such as various types of expansion chamber and nozzles are suggested by using simulation results. Simulated results and experimental ones are compared with previous (ones that of in under development and with capacitor) GCB. Modified new shape of an expansion chamber and nozzle has been suggested to improve the efficiency of gas flow and to provide guidelines for designing self-blast breaker with a higher interruption capability.

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.702-708
• /
• 2016

The torque converter is deformed according to the rotating speed and control pressure when engine power is transferred to the transmission. This deformation, which is called ballooning phenomenon, occurs mainly at the outer side by the centrifugal force of the automatic transmission fluid (ATF) and the control pressure from the valve body. Although the torque converter is slightly deformed when rotating, the ballooning phenomenon affects fluid performance, efficiency and durability. Thus, expansion characteristics analysis is important in determining torus size, control pressure and structure. In this paper, an analysis equation and FEM model was developed to investigate the expansion characteristics. Using this model, structural analysis was performed to investigate the relationships between deformation and the torus diameter. The results were confirmed by comparing with the test results.

• 한국추진공학회지
• /
• 제15권4호
• /
• pp.41-47
• /
• 2011

75톤급 개방형 액체로켓 엔진에 장착되는 터보펌프의 터빈은 초음속 충동형 방식이다. 본 연구에서는 터빈 로터 앞전 두께가 성능에 미치는 영향을 실험을 통해 살펴보았다. 터빈 시험에서는 2가지 다른 앞전 두께를 가진 로터를 이용해 실험하였으며, 각 로터는 앞전 두께 대 피치비가 30톤 로터 대비 각각 1.9배와 1.4배이다. 시험 결과 로터 두께가 1.4배인 로터의 설계 상사점 효율이 1.5% 상승하였고, 동일 회전수에서 최대 효율이 나타나는 압력비도 완전팽창비 쪽으로 증가하였다.

• 설비공학논문집
• /
• 제13권2호
• /
• pp.96-105
• /
• 2001

R410a which is one of HFC refrigerants is being considered to be a promising replacement for R22 widely used in domestic air conditioners. The rolling piston type rotary compressors for R410a have lower energy efficiency than those for R22 because of the high pressure difference between a suction chamber and a discharge chamber in the compression mechanism. in addition, the re-expansion gas loss of the rotary compressor for R410a which occurs a ta clearance volume in a discharge port becomes larger than that for R22 due to high density of R410a refrigerant. Therefore, Pressure-Volume analyses for various design parameters of a discharge system were carried out to improve efficiency of a R410a rotary compressor. The results such as performance dta, over-compression loss, and re-expansion loss were acquired by P-V analyses and analyzed quantitatively. As a conclusion, the optimal specifications of several design parameters of a discharge system were obtained by analyzing P-V diagrams.

• 경영과학
• /
• 제30권2호
• /
• pp.43-61
• /
• 2013

With the recent introduction of supply chain management (SCM), quality management has extended from within companies to between companies. As a result, supply chain quality management (SCQM) has received increased attention. However, existing SCQM studies only focus on what impact quality control in supply chains have on company performance while virtually no studies examine quality control efficiencies. This paper, therefore, evaluated the SCQM efficiency of a parent company and its partner companies by using Data Envelopment Analysis (DEA) based on the Quality Collaboration Index for Supply Chain Management (QCI-SCM) conducted by the Korean Standards Association for its 'Quality Innovation-Based Building and Expansion of Business.' Study results showed that a parent company and its partners showed an overall average efficiency of approximately 80% (parent company 80.37%, partner company 79.05%). By also performing a discriminant analysis based on the calculated efficiency scores using DEA, factors that made companies efficient or inefficient were different between the two groups. In parent companies, efficiency and inefficiency were determined by factors such as communication, infra-structure, support, delivery of quality, and benefit sharing, whereas in partner companies, talent development, infrastructure, crisis management, and delivery of quality were the determining factors. In this paper, we examined the efficiency of SCQM and analyzed them from the perspective of both the parent company and partner companies to offer strategic SCQM insights.

• KDI Journal of Economic Policy
• /
• 제40권4호
• /
• pp.23-45
• /
• 2018

The Korean government has provided various policy devices to boost technology transfers between academia and industry since the establishment of the Technology Transfer Promotion Act in 2000. Along with the enactment of the law, the Korean government mandated the establishment of a technology transfer office at national and public universities and encouraged technology transfer activities. Despite the quantitative expansion of technology transfer offices (TTOs), operational inefficiency was brought up. As a supplementary policy, the Korean government implemented a line of projects to support the labor and business expenses of leading TTOs. This research questions whether the project greatly affected the technical efficiency of TTOs. We analyze publicly available university panel data from 2007 to 2015 using a one-step stochastic frontier analysis. The results suggest that the program was marginally effective at shifting the technical efficiency distribution to the right on average, but it failed to maximize its impact by diversifying the policy means based on targets. The marginal effects of the program on technical efficiency differ according to the research capability and size of each school. We also compare technical efficiency against the licensing income at the start and end of the program. Technical efficiency increased for the leading TTOs, and both measures show improvements for unsupported TTOs. Our empirical results imply that diversifying the program for universities with different characteristics may have improved the effectiveness of the policy.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.487-492
• /
• 2010

For developing a two-stroke free-piston hydrogen engine with high efficiency and low emission, determination of the scavenging type is one of the most important factor. In this research, backfire characteristics for loop scavenging were analyzed with the number of piston crevice volume and piston expansion speed. Rapid Compression Expansion Machine, RCEM was used for combustion research of the free piston $H_2$ engine in the experiment. As the results, it was shown that although backfire occurring in a loop scavenging type can be partially controled by a complete exhaust of burned gas, possibility of backfire basically exist due to the structure which piston crevice volumes contact with fresh mixture in a scavenging port. However, a loop scavenging may be considered as combustion chamber of a free piston $H_2$ engine from the point of view that backfire does not occur nearby lean equivalence ratio obtained high thermal efficiency. It was also analyzed that an advances of backfire occurrence timing with increase of the fuel-air equivalence ratio were due to promotion of flame propagation into piston crevice volumes by decrease of the quenching distance.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.39-44
• /
• 2013

LTE(Long Term Evolution)-Advanced에서는 저전력 피코셀(picocell)과 같은 소형셀을 중첩하여 배치해 시스템 성능을 향상시키기 위한 HetNet(Heterogeneous Network)에 대한 연구가 활발히 진행되고 있다. 또한 HetNet에서 데이터 오프로딩 효과를 증대시키기 위해 셀 영역 확장(CRE: Cell Range Expansion) 기술이 소개되었다. 본 논문에서는 최적의 오프로딩 효과를 위해 SINR(Signal to Interference plus Noise Ratio) 기반 셀 선택 기법을 제안한다. 셀 확장 영역에 존재하는 사용자의 간섭 관리를 위해 ABS를 사용하며, 스펙스럼 효율을 증가시키기 위하여 동적인 ABS 비율을 사용한다. 모의실험 결과, 제안한 기법에서 피코셀뿐만 아니라 매크로셀 사용자의 스펙트럼 효율이 향상되어 전체적인 사용자의 성능이 향상 된 것을 볼 수 있다.