• 한국작물학회지
• /
• 제51권spc1호
• /
• pp.52-57
• /
• 2006

벼 담수직파재배에서 입모수가 적정입모수(120개/$m^2$)보다 적은 과소구를 60개/$m^2$, 적정입모수보다 많은 과다구를 200개/$m^2$로 설정하여, 과소구의 경우 3엽기에 4 kg/10a의 질소를 추가 시비하여 분얼발생을 촉진시키고 과다구에서는 5엽기에 시용하는 분얼비 3.3 kg/10a의 질소시비를 생략하여 분얼을 억제한 결과는 아래와 같다. 1. 개체별 최고분얼수는 적정구가 9.8개인데 비하여 과소구는 15.2개, 과다구는 8.6개이었으며, 개체별 유효분얼수는 적정구가 3.7개, 과소구가 6.5개, 그리고 과다구가 2.4개로 입모가 과다할수록 개체당 분얼수가 줄어들고 유효경비율이 낮아졌다. 2. 분얼발생 양상은 입모밀도에 관계없이 주간 3절위에서 첫 번째 1차 분얼이 발생하였으며, 유효분얼은 과소구, 적정구, 과다구에서 각각 6.5개/plant, 3.7개/plant, 2.4개/plant 발생하였다. 3. 입모과소구의 벼 개체내에서 분얼의 발생 순서와 간장, 수장, 무효분얼수, 수당립수, 임실율은 부의상관관계가 있었으나, 적정 입모밀도에서는 유의한 상관이 없었다. 입모과다구에서는 분얼발생순서와 수장, 무효분얼, 완전미율이 유의한 상관관계를 나타내었다. 4. 현미외관 특성은 입모 과소구가 적정구나 과다구 보다 청미발생이 적어서 완전미율이 가장 높게 나타났으며, 과다구와 적정구의 경우에는 1차 분얼에서 청미발생이 과소구보다 15-20%정도 높게 나타났다. 5. 쌀 수량은 적정구가 494 kg/10a인데 비하여 과소구는 적정구의 99%, 과다구는 적정구의 97%의 수량이 확보되었다.

• 한국환경독성학회:학술대회논문집
• /
• 한국환경독성학회 2003년도 추계국제학술대회
• /
• pp.170-170
• /
• 2003

An initial study has been conducted with Korea Institute of Geoscience and Mineral resources and National Institute of Environment Research to evaluate the distribution of radon levels and their risk levels of groundwater in Korea. Probability distribution of 616 samples was log-normal one with 1,867pCi/L as arithmetic value, 920pCi/L as median and 40,010pCi/L as maximum during iou. years(1999-2002). In addition, 10% of total samples are in excess of 4,000pCi/L, 20% in excess of 2,700pCi/L, and 30% in excess of 1,700pCi/L, and 15 samples exceeds 10,000pCi/L. Total samples are grouped into 10 areas and 5 rocks unit, and difference of concentrations among areas and rocks are statistically significant(respectively, p<0.0001). The highest area is Daejeon located in ogcheon metamorphic rocks and granitic rocks, and most of all sites with high concentration sites are located in granitic rocks. The lowest area is Jeju located in volcanic rocks. We have estimated excess cancer risks of radon based on these data. To estimate risks, first of all, use patterns of groundwater are categorized with 6 groups: for drinking, household, farming, washing cars, raising stock, and others. We considered risk only for drinking water and household water because radon is rapidly dispersed before it of other use reach human respiratory organs. We select 565 samples for risk analysis, and applied unit risk which is 6.6210-7 per pCi/L to be recommended by NAS committee. Unit risk was derived from considering radon ingestion and radon inhalation from water use. When estimating risk, we analyzed PDF of concentration and represented risk as 50 and 95 percentile values to consider uncertainty with Monte-Carlo simulation. It results in 10-4 level of their excess cancer risk and in 10-2 level in some areas with high concentration of radon. It must be monitor periodically and take adequate actions in these risky sites. We recommend that it needs to take more survey and finally set guideline for radon regulation in groundwater.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.373-379
• /
• 2015

Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.89-92
• /
• 2008

The extreme heat watch warning system(EHWWS) that Korea Meterological Administration carried out a preliminary from July 1, 2007, considered both daily maximum temperature and daily maximum heat index simultaneously. It was requested revision of the standard level of EHWWS to solve the difficulty of forecasting occurred when we were considering two parameters simultaneously and we did not considering heat index according to areas. For this, we established three type standard, such as type 1 that considered both daily maximum temperature and daily maximum heat index, Under the extreme heat day that daily minimum temperature was more than $25^{\circ}C$, type 2 that considered daily maximum temperature and type 3 that considered only daily maximum heat index and then analyzed whether these 3 types satisfies the excess mortality of the extreme heat warning or not. As a results, type 1 and 2 were more explain away excess mortality each warning step than type 3. type 2 could also apply case of not to consider heat index according to areas and had a merit for extreme heat forecasting easily because the standard was simple. Therefore we think type 2 is more suitable and reasonable standard for Korea extreme heat watch warning system(KEHWWS) than type 1. In addition, we need to develop model that exactly predicts the excess mortality will be take place during the extreme heat warning and construct KEHWWS.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.565-572
• /
• 2011

The effects of chemical pretreatments on the excess sludge production in the membrane-coupled bioreactor were investigated. In addition, their effects on membrane fouling were also evaluated. Two membrane bioreactors were operated. In one reactor, a part of the mixed liquor was t reated with NaOH and ozone gas consecutively and was returned to the reactor. T he f lowrate of the chemical pretreatment stream was 1.5% of the influent flowrate. During the 200days of operation, the MLSS level in the bioreactor with mixed liquor pretreatment was maintained relatively constant at the range of 8,000 ~ 10,000$mg/{\ell}$ while it increased steadily up to 26,000 $mg/{\ell}$ in the absence of the pretreatment. Each reactor was equipped with two laboratory membrane modules where the flux for each module was 20, and 30 ${\ell}/m^2{\cdot}h$, respectively. With pretreatment, almost constant transmembrane pressure(TMP) was observed throughout the operation at the flux of 20 ${\ell}/m^2{\cdot}h$. Without pretreatment the membrane module at the same flux could also be operated at relatively stable condition. However, as the MLSS increases up to 25,000 $mg/{\ell}$, a fast TMP increase was observed. In conclusion, a complete control of excess sludge production in the membrane-coupled bioreactor was possible without significant deterioration of the treated water quality. In addition, it was shown that stable operation in terms of TMP is possible with sludge pretreatment and recirculation.

• 플랜트 저널
• /
• 제15권3호
• /
• pp.35-41
• /
• 2019

본 연구는 석탄 연소에서 우드펠릿 전소 보일러로 설비를 개조하여 실제 운영 중인 125 MW급 영동화력 1호기 보일러를 대상으로 2단 연소용 공기의 공급위치와 비율을 조정하여 NOx 및 CO발생에 미치는 영향을 시험하였다. 2단 연소용 공기량이 상대적으로 증가하면, 연료입도가 작아서 낮은 과잉 공기비(1.10)로 연소할 경우 NOx는 약간 감소하고 CO는 급격히 감소하지만, 연료 입도가 커서 높은 과잉공기비(1.33)로 연소할 경우 NOx는 약간 증가하지만 CO는 거의 영향을 받지 않았다. 또한 2단 연소용 공기량이 같아도 공급위치가 주연소기 상부로 편중될수록 NOx 및 CO 발생 농도는 낮게 나타났으며 과잉 공기비가 높은 경우 2단 연소용 공기량에 무관하게 NOx 및 CO의 발생은 매우 낮은 수준을 유지한다는 것을 알 수 있었다.

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.33-39
• /
• 2024

Understanding the behavior of soil under cyclic loading conditions is essential for assessing its response to seismic events and potential liquefaction. This study investigates the effect of non-plastic fines content (FC) on excess pore pressure generation in medium-density sand-silt mixtures subjected to strain-controlled cyclic direct simple shear (CDSS) tests. The investigation is conducted by analyzing excess pore pressure (EPP) ratios and the number of cycles to liquefaction (Ncyc-liq) under varying shear strain levels and FC values. The study uses Jumunjin sand and silica silt with FC values ranging from 0% to 40% and shear strain levels of 0.1%, 0.2%, 0.5%, and 1.0%. The findings indicate that the EPP ratio increases rapidly during loading cycles, with higher shear strain levels generating more EPP and requiring fewer cycles to reach liquefaction. At 1.0% and 0.5% shear strain levels, FC has a limited effect on Ncyc-liq. However, at a lower shear strain level of 0.2%, increasing FC from 0 to 10% reduces Ncyc-liq from 42 to 27, and as FC increases further, Ncyc-liq also increases. In summary, this study provides valuable insights into the behavior of soil under cyclic loading conditions. It highlights the significance of shear strain levels and FC values in excess pore pressure generation and liquefaction susceptibility.

• 대한산업공학회지
• /
• 제30권4호
• /
• pp.294-300
• /
• 2004

This paper considers a trade-off effect between in-house storage space and leased storage space in generic warehouses operated under a randomized storage assignment policy. The amount of in-house storage space is determined based on the law of large numbers satisfying a given service level of protection against space shortages. Excess space requirement is assumed to be met via leased storage space. A new analytic model is formulated for determining the excess space such that the total cost of storage space is minimized. Finally, computational results are provided for the systems where the standard economic-order-quantity inventory model is used for all items.

• 한국식품영양과학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 1994

The present study was conducted to evaluate the effect of dietary levels of vitamin A on the lipid composition in rats fed Zn-deficient diets. Fifty male Sprague-Dawley rats were fed 5 experimental diets for 7 weeks. Rats were fed Zn-and vitamin A-deficient diet or the same diets supplemented with various levels of vitamin. A liver total lipid, cholesterol and triglycerides contents tended to decrease in Zn-deficient rats, but the supplementation of excess vitamin A enhanced those contents. Plasma cholesterol content was significantly higher in feeding Zn-deficient and excess vitamin A diet. Plasma triglyceride and phospolipid contents were higher in Zn-deficient groups, but not influenced by dietary levels of vitamin. A . Plasma HDL-cholesterol content was not changed by Zn-deficient diets. Plasma alkaline phosphatase activity was significantly reduced in Zn-deficient groups. Zinc contents of plasma and liver were influenced by the dietary level of zinc, but not changed by supplementation of vitamin A.

• 한국환경과학회지
• /
• 제18권7호
• /
• pp.781-796
• /
• 2009

The current standard level of Heat Health Watch Warning System consider both daily maximum temperature and daily maximum heat index(HI), but current standard could not consider daily maximum HI due to the difficulties in forecasting when we consider both daily maximum temperature and daily maximum HI and no considering HI because relative humidity could not observed for some regions. So, Newly established standard level of Heat Health Watch Warning System is based on daily maximum temperature exceeding $30^{\circ}C$ for two consecutive days or daily minimum temperature exceeding $25^{\circ}C$ and daily maximum temperature exceeding $30^{\circ}C$. These days are called "extreme heat days". On extreme heat days, the standard of extreme heat advisory is based on daily maximum temperature among exceeding $32.7^{\circ}C$ and not exceeding $34.8^{\circ}C$, and extreme heat warning is based on daily maximum temperature exceeding $34.8^{\circ}C$. ANOVA analysis was carried out using the data of Seoul Metropolitan City in 1994 to check the robustness of the new standard level of Heat Health Watch Warning System from this study, in particular for mortality variable. The results reveal that the new standard specifies excess mortality well, showing significance level of 0.05 in the difference of excess mortality for each phase.