• International Journal of Internet, Broadcasting and Communication
• /
• 제6권2호
• /
• pp.1-9
• /
• 2014

This paper presents a study on nonlinear time varying systems based on differential geometry. A brief introduction about controllability and involutivity will be presented. As an example, the exact feedback linearization and the approximate feedback linearization are used in order to show some application examples.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2116-2124
• /
• 2018

Magnetic levitation system with the advantages of non-contact, no friction and no wear can satisfy the requirement of high precision and high speed positioning. In this paper, magnetic levitation positioning stage which mainly consists of planar coil and HALBACH permanent magnet array and its control and driving system are designed. Magnetic levitation system is a highly nonlinear and strongly coupled complex system and its control performance can be influenced by the uncertainty and external disturbance. So exact feedback linearization method is used to realize exact linearization and decoupling, and a strategy of sliding mode control based on disturbance observer is proposed to compensate the uncertainty and external disturbance. Detailed proofs of observer's convergence property and system stability are derived. Both the simulation and experiment results verify the effectiveness of sliding mode control algorithm based on disturbance observer.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.263-263
• /
• 2000

Electromagnetic Suspension(EMS) System produces no noise, friction and heat through non-contacting operation Therefore, the applicable device using EMS system has a lot of attraction in case of the high-speed and non-contacting transmission EMS with nonlinear properties requires a precise airgap position control and stable kinematics characteristics under the disturbances, In this study, the nonlinear system was linearized by a Nonlinear Feedback Lineariztion(NFL) method. The NFL method requires that the modelling should be exact, and the state variables should be measured and a rapidly operating controller be necessary on account of a heavy data calculating In the experiments. the ideal control characteristics of the NFL was acquired through simulation at first. then the characteristics of the actual system were compared with those of simulation. In addition, the results by NFL were examined and analysed considering the characteristics of the PID control. The Control by NFL shows much stable control characteristics than the PID control. Whereas, the steady state errors occur for various disturbances. hence a robust control design is remained for a further study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.110-115
• /
• 2001

The spherical CVT, intended to overcome some of the limitations of existing CVT designs, is marked by its simple kinematic design, improved efficiency of the shift actuator, and IVT characteristics, i.e., the ability of smooth transition between the forward, neutral, and reverse states without the need for any brakes or clutches. And it has been promised much possibility of energy savings and various applications for small power capacity machinery. Due to the nonlinearity of the spherical CVT shifting dynamics, however the original open-loop system is inherently unstable. Hence a feedback controller is necessary to make the system stable and to achieve effective tracking performance. To do this, we designed a feedback controller that cancels nonlinearities and transforms the original nonlinear system dynamics into a stable and controllable linear one, based on the input-state linearization method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1228-1233
• /
• 2005

In this paper, we present a new guidance law for a reusable launch vehicle (RLV) that lands vertically after reentry. In our past studies, a guidance law was developed for a vertical/soft landing to a target point. The guidance law, which is analytically obtained, can regenerate a trajectory against disturbances because it is expressed in the form of state feedback. However, the guidance law does not necessarily guarantee a vertical/soft landing when a dynamical system such as an RLV includes a nonlinear phenomenon owing to the atmosphere of the earth. In this study, we introduce a design of the guidance law for a nonlinear system to achieve a vertical/soft landing on the ground using the exact linearization method and solving the two-point boundary-value problem for the derived linear system. Numerical simulation confirmed the validity of the proposed guidance law for an RLV in an atmospheric environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1650-1651
• /
• 2007

This paper presents a novel nonlinear speed control strategy for induction motor utilizing exact feedback linearization with states feedback. The speed and flux control loops utilize nonlinear feedback which eliminates the need for tuning, while ordinary proportional-integral controllers are used to control the stator current of d-axis the speed. The control scheme is derived in rotor field coordinates and employs an appropriate estimator for estimation of the rotor flux angle, flux magnitude.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1137-1139
• /
• 1996

Feedback Linearization technique needs the exact cancellation of nonlinearity which restricts its application to real environment. To overcome these shortcomings, High-pin feedback is good remedy to this problem. In this paper, we briefly survey the high-gain feedback control technique and show some conditions for applying this method to nonlinear systems. In order to use this technique in real situation, some properties of ${\varepsilon}$-bound and semi-global stabilization are discussed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.159-165
• /
• 1998

In this paper the sway-control problem of a container crane is investigated. The control loop is divided into two stages. The first stage is a modified time optimal control for trolley traversing. The velocity command for trolley traversing consists of three components ; a reference velocity and two feedback signals for compensating the deviations of trolley and sway angle from their desired trajectories. For trolley's exact positioning the trolley dynamics is identified via an error equation identifier structure. The second stage is a nonlinear residual sway control that starts at the end of first stage. The control design for the second stage is investigated from the perspective of controling an underactuated system, and the control law combines the feedback linearization and variable structure control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.669-674
• /
• 1990

A nonlinear feedback linearizing control method for a EMS(Electro Magnetic Suspension) system is proposed. After linearizing the system using the exact linearizing method, conventional linear system control theory has been applied. Computer simulations are carried out in order to compare the performance of the proposed controller with that of the existing controller designed by using Taylor series expansion around nominal points.

• 대한전기학회논문지
• /
• 제41권3호
• /
• pp.292-299
• /
• 1992

A nonlinear feedback linearizing control method for an EMS (Electro-Magnetic Suspension) system is proposed. After linearzing the system using the exact linearizing method, conventional linear system control theory has been applied. Robustness properties of the proposed controller with respect to the load variations is also analysed for a single magnet suspension system. Computer simulation is carried out in order to compare the performance of the proposed controller with that of the existing controller designed by using Taylor series expansion around nominal points.