• Transactions on Electrical and Electronic Materials
• /
• v.5 no.3
• /
• pp.113-119
• /
• 2004

Structural and optical properties of as-synthesized, Ga$_2$O$_3$-coated, and Al$_2$O$_3$-coated GaN nanowires are examined in this paper. GaN nanowires were synthesized by thermal evaporation of ball-milled GaN powders in an NH$_3$ atmosphere. The thermal annealing of the as-synthesized GaN nanowires in an argon atmosphere allows their surfaces to be oxidized, leading to the formation of 2nm-thick Ga$_2$O$_3$ layers. For the oxidized GaN nanowires, the distances between the neighboring lattice planes are shortened, and an excitonic emission band is remarkably enhanced in intensity, compared with the as-synthesized GaN nanowires. In addition, the as-synthesized GaN nanowires were coated cylindrically with Al$_2$O$_3$ by atomic layer deposition technique. Our study suggests that the Al$_2$O$_3$-coating passivates some of surface states in the GaN nanowires.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.625-629
• /
• 2016

Electrical and optical properties of the AC voltage driven organic light-emitting diodes were investigated by measuring the electroluminescence of the device. Device structure of ITO(170 nm)/TPD(40 nm)/Alq3(60 nm)/LiF(0.5 nm)/Al(100 nm) was manufactured using a thermal evaporation. Sinusoidal and square-type AC voltage was applied to the device using a function generator. Amplitude of the applied voltage was 9.0 V, and a frequency was varied from 50 Hz to 50 kHz. Electroluminescence out of the device was measured in a Si photodetector simultaneously with the applied voltage together. An intensity and a delayed residual luminescence from the device were depended on the frequency of the sinusoidal voltage. It is thought to be due to a contribution of the capacitive nature in the equivalent circuit of the device. An electron mobility was estimated using a time constant obtained from the luminescence of the device driven by the square-type AC voltage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.552-561
• /
• 2006

The single droplet combustion characteristics of diesel fuel and low quality oil with additive oxygenate and paraffin under high ambient temperature and atmospheric pressure were investigated in the study. The results of the study may are concluded as follows: In the combustion of diesel fuel and low quality oil droplet with additive of oxygenate and paraffin. the dimensionless droplet size of $(D/Do)^2$ was linearly decreased with time. A fuel droplet with low boiling temperature additives and in high boiling temperature base fuel evaporates and burns faster than usual base fuel. Especially. these trends were remarkably obtained by decreasing boiling point and increasing blending contents of additives in case of oxygenated agents rather than n-paraffin agents. This rapid burning may result from so-called 'micro-explosion' and its burning intensity varies with the types of additives. The results above may suggest that rapid evaporation of oxygenate additive in the middle stage of combustion can contribute much to combustion improvement of blended fuels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.49-56
• /
• 2006

The single droplet combustion characteristics of multicomponent fuel such as diesel-oxygenate and diesel-paraffin blends under high ambient temperature and atmospheric pressure were investigated in the study. The results of the study may be concluded as follows : In the combustion of diesel fuel droplet with additive of oxygenate and paraffin, the dimensionless droplet size of $(D/D_o)^2$ was linearly decreased with time. A fuel droplet with low boiling temperature additives and in high boiling temperature diesel fuel evaporates and burns faster than usual diesel fuel. This rapid burning may result from so-called "micro-explosion" and its burning intensity varies with the types of additives. The results above may suggest that rapid evaporation of oxygenate additive in the middle stage of combustion can contribute much to combustion improvement of blended fuels. When compared to ordinary diesel fuel, neat oxygenate and paraffin fuels show blue flame during entire combustion which prove smokeless combustion.

• Journal of Ginseng Research
• /
• v.6 no.2
• /
• pp.168-203
• /
• 1982

Effects of soil moisture on growth of Panax ginseng, of various factors on soil moisture, and of moisture on nutrition, quality, physiological disorder, diseases and insect damage were reviewed. Optimum soil moisture was 32% of field capacity with sand during seed dehiscence, and 55-65% for plant growth in the fields. Optimum soil moisture content for growth was higher for aerial part than for root and higher for width than for length. Soil factors for high yield in ginseng fields appeared to be organic matter, silt, clay, agreggation, and porosity that contributed more to water holding capacity than rain fall did, and to drainage. Most practices for field preparation aimed to control soil moisture rather than nutrients and pathogens. Light intensity was a primary factor affecting soil moisture content through evaporation. Straw mulching was best for the increase of soil moisture especially in rear side of bed. Translocation to aerial part was inhibited by water stress in order of Mg, p, Ca, N an Mn while accelerated in order of Fe, Zn and K. Most physiological disorders(leaf yellowing, early leaf fall, papery leaf spot, root reddening, root scab, root cracking, root dormancy) and quality factors were mainly related to water stress. Most critical diseases were due to stress, excess and variation of soil water, and heavy rain fall. The role of water should be studied in multidiciplinary, especially in physiology and pathology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.172-172
• /
• 2008

By thermal evaporation method, well-aligned ZnO nanowires were synthesized on sapphire substrate at $1000^{\circ}C$ with different oxygen flow rate by using pure ZnO powder (99.999 %). The as-synthesized ZnO nanowires were characterized by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The well-aligned nanowires are single crystalline in nature and perpendicularly grown along the c-axis. Also the growth rate of nanowires, such as diameter and length, had a tendency to increase as oxygen flow rate increased. Based on the PL measurement of ZnO nanowires, we found that the near band edge of emission redshifted with the increasing intensity of the defect-related green emission in proportion to the increase of oxygen flow rate. "This research was supported by the Korea Research Foundation Grant funded by the Korean Government(MOEHRD)" (The Regional Research Universities Program/Chungbuk BIT Research-Oriented University Consortium).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.2
• /
• pp.23-31
• /
• 1997

The results of high speed photography, acoustic emission detection and plasma UV radiation intensity measurement during CO2 laser welding of stainless steel 304 are presented. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of a high speed melt flow which originated from the part of weld pool and flowed along the sides wall of keyhole was confirmed by the slag motion on the weld pool. the characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal acoustic emission (AE) and light emission (LE) spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. (The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation.) The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.551-556
• /
• 2000

We have investigated the effect of surface In composition with Si cell temperature on the In$_{0.1}$/Ga$_{0.9}$/As epilayers grown on GaAs substrates. The epilayers were grown by molecular beam epitaxy(MBE) method and were characterized by the pthotoreflectance(PR) measurements. The E$_{o}$ bandgap energies of In$_{0.1}$/Ga$_{0.9}$/As epilayers were observed at around 1.28 eV at room temperature, and the additional shoulder peaks appeared at the higher energies than E$_{o}$ with increase of Si doping concentrations. The intensity of the additional shoulder peak was decreased with lowering the measurement temperature and the peak disappeared with the increase of surface etching time. This results hows that In composition at surface of InGaAs epilayer is decreased with the increase of the doping cell temperature. We consider that the reason of the decrease of In composition at the surface should be due to In re-evaporation from the surface by radiation heat of Si doping cell.ell.ell.ell.

• Korean Journal of Materials Research
• /
• v.19 no.6
• /
• pp.313-318
• /
• 2009

Polymer Light Emitting Diodes (PLEDs) with an ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al structure were prepared on plasma-treated ITO/glass substrates using spin-coating and thermal evaporation methods. The annealing effects of the PFO-poss film when it acts as the emission layer were investigated by using electrical and optical property measurements. The annealing conditions of the PFO-poss emission film were 100 and $200^{\circ}C$ for 1, 2 and 3 hours, respectively. The luminance increased and the turn-on voltage decreased when the annealing temperature and treatment time increased. After examining the Luminance-Voltage (L-V) properties of the PLED, the maximum luminance was found to be 1497 cd/$m^2$ at 11 V for the device when it was annealed at $200^{\circ}C$ for 3 hours. The peak intensity of the PLED emission spectra at approximately 525 nm in wavelength increased when the annealing temperature and time of the PFO-poss film increased. These results suggest that the light emission color shifted from blue to green.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.467-471
• /
• 1999

BN films were grown on silicon (l00) substrate by magnetically enhanced activated reactive evaporation (ME-ARE) with pulsed DC power instead of r.f. for substrate biasing. The deposited films were analyzed using Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). FTIR results show that the intensity of absorption band of $sp^2$ bond of BN decreased and that of $sp^3$ bond of c-BN increased with increasing pulsed DC bias voltage applied to substrate. The initially grown layer at the interface was observed by TEM and considered to be of$ sp^2$-bonded BN. The cross-sectional and planar TEM micrographs show that the upper layer on the initial layer was the single phase c-BN. It is concluded that cubic boron nitride films could be synthesized by ME-ARE process with pulsed DC biasing.