• Journal of Venture Innovation
• /
• v.7 no.3
• /
• pp.183-228
• /
• 2024

This study aimed to develop a competency evaluation scale tailored to the specific needs of key talent in the ICT startup sector. Existing competency assessment tools are mostly designed for environments in large corporations or traditional small and medium-sized enterprises, failing to adequately reflect the dynamic requirements of rapidly evolving startups. For startups, where a small number of individuals directly impact company success, key talent is a critical asset. Accordingly, this study sought to create a scale that measures the competencies suited to the challenges and opportunities faced by startups, helping domestic startups establish more effective talent management strategies. The research initially selected 71 items through a literature review and in-depth interviews. Based on expert feedback that emphasized the need for more precise and clear descriptions, the item descriptions were revised, and a total of 65 items were developed through four rounds of content validation. Following preliminary and main surveys, a final set of 58 items was developed. The main survey conducted further factor analysis based on the three broad competency factors?knowledge, skills, and attitude?identified in the preliminary survey. As a result, 10 latent factors emerged: 6 items for task comprehension, 6 items for practical experience (tacit knowledge), 6 items for collaboration, 9 items for management and problem-solving, 9 items for practical skills, 4 items for self-direction, 5 items for goal orientation, 5 items for adaptability, 5 items for relationship orientation, and 3 items for organizational loyalty. The developed scale comprehensively covers the multifaceted nature of competencies, allowing for a thorough evaluation of essential skills such as technical ability, teamwork, innovation, and leadership, which are critical for startups. Therefore, the scale provides a tool that helps startup managers objectively and accurately assess candidates' competencies. It also supports the growth of employees within startups, maximizing the overall organizational performance. By utilizing this tool, startups can build a strong internal talent pool and continuously enhance employees' competencies, thereby strengthening organizational competitiveness. In conclusion, the competency evaluation scale developed in this study is a customized tool that aligns with the characteristics of startups and plays a crucial role in securing sustainable competitiveness in rapidly changing market environments. Additionally, it offers practical guidance to support the successful growth of domestic startups and help them maintain their competitive edge in the market, contributing to the development of the startup ecosystem and the growth of the national economy.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.121-133
• /
• 2014

Block copolymers including ABA triblock architectures are useful as thermoplastic elastomers and toughened plastics depending on the relative glassy and rubbery content. These materials can be blended with other polymers and utilized as additives, toughening agents, and compatibilizers. Most of commercially available block copolymers are derived from petroleum. Renewable alternatives are attractive considering the finite supply of fossil resources on earth and the overall economic and environmental expenses involved in the recovery and use of oil. Furthermore, tomorrow's sustainable materials are demanding the design and implementation with programmed end-of-life. The present review focuses on the preparation and evaluation of new classes of renewable ABA triblock copolymers and also emphasizes on the use of carbohydrate-derived poly(lactide) or plant-based poly(olefins) having a high glass transition temperature and/or high melting temperature for the hard phase in addition to the use of bio-based amorphous hydrocarbon polymers with a low glass transition temperature for the soft components. The combination of multiple controlled polymerizations has proven to be a powerful approach. Precision-controlled synthesis of these hybrid macromolecules has led to the development of new elastomers and tough plastics offering renewability, biodegradability, and high performance.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.442-448
• /
• 2012

Many outbreaks of food-borne illnesses have been associated with the consumption of fresh vegetables and fruits contaminated with food-borne pathogens. Contaminated medium, manure and irrigation water are probable vehicles for the pathogen in many outbreaks. The aim of this study was to determine the potential transfer of Escherichia coli and Bacillus cereus from medium and soil fertilized with contaminated compost or irrigation with contaminated water to the edible parts of lettuce. Moreover, survivals of the two pathogens on lettuce contaminated medium, soil and irrigation water were estimated. Lettuce seeds were planted in medium contaminated with 7.5 log colony forming unit (CFU)/g of E. coli and B. cereus. Seedlings grown in the contaminated medium were transplanted in soil fertilized with contaminated pig manure compost or uncontaminated soil. Contaminated irrigation water with E. coli and B. cereus at 8.0 log CFU/mL was applied only once on the plant by sprinkle irrigation and surface irrigation. Although E. coli and B. cereus in medium and sprouted lettuce after planting seeds were reduced as time passed, these pathogens survived in seedling raising stage for extended periods. The numbers of E. coli and B. cereus in lettuce grown on contaminated soil were detected over 4.0 log CFU/g for 21 days. The numbers of E. coli and B. cereus in lettuce applied by sprinkle irrigation were higher than those of surface irrigation by 5.0 log CFU/g. Our results indicated that contaminated medium, soil and irrigation water can play an important role in the presence of food-borne pathogens on vegetables.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.939-944
• /
• 2018

Clean fire extinguishing agents refer to chemical that can replace Halon 1211 and Halon 1310 according to the Montreal Protocol fermented to protect the Earth's ozone layer. In Korea and abroad, system standardization and performance evaluation of clean fire extinguishing agents are being carried out. This paper proposes an optimal nozzle shape by modeling and numerical analysis of various nozzle shapes based on general clean fire extinguishing system. The ejection speed of the nozzle can be improved by studying three - dimensional modeling of the nozzle for two shapes, Type A and B. Flow analysis was performed on the two types of nozzles and the gas velocity and pressure distribution were measured with different nozzle diameters. It was confirmed that the jetting speed was changed at the nozzle outlet according to the number and diameter of the nozzle holes. The flow rate increased with increasing the pressure regardless of the nozzle hole diameter. Based on the results obtained from the experiment, the K-factor value was deduced. Finally, a nozzle with a 12-hole structure with a 5-mm nozzle hole was proposed.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.279-287
• /
• 2018

Flight tests for aircraft development and certification have higher air accidents risk than other aerospace industries. Accordingly risk identification necessary for risk management in the safety management system is a very important factor in preventing similar air accidents during flight tests. But internationally issued accident statistics are usually confined to commercial transport aircraft and they do not reflect characteristics of flight tests, also databases to hazards identification during flight tests are not established or available in Republic of Korea. Therefore, we identified flight test procedures and traced the major causes of aviation accidents based on the statistics and preventive materials for risk management which were issued by international organizations and advanced countries of aviation. A total of 312 final reports classified as flight test among air accident/incident database held by U.S. NTSB were researched and about 200 flight test hazard were identified. The results of this study will be used as basic data for establishing the safety management system of the national comprehensive flight performance test site.

• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.105-110
• /
• 2017

Real-time measurements of fine particles from stack emission gases are necessary due to the needs of continuous environmental monitoring of PM10 and PM2.5. The porous tube dilutor using hot and cold dilutions was developed to measure fine particles without condensable particles from highly humid emission gases and compared to the commercialized ejector-type dilutor. Particle size distributions were measured at the emission gases from a diesel engine and a coal-fired boiler. The porous tube dilutor could successfully measure the accumulation mode particles including relatively large particles more than $3{\mu}m$ without nuclei particles, while the ejector dilutor detected some condensable particles and could not detect large particles. The porous tube dilutor could successfully remove the already condensed water droplet particles generated by a humidifier in a $30m^3$ chamber.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.510-516
• /
• 2021

Recently, the range of utilization and demand for unmanned aerial vehicle (UAV) has been continuously increasing, and research on the construction of a separate operating system for low-altitude UAV is underway through the development of a management system separate from manned aircraft. Since low-altitude UAVs also fly in the airspace, it is essential to establish technical standards and certification systems necessary for the operation of the aircraft, and research on this is also in progress. If the operating standards and certification requirements of the aircraft are presented, a test method to confirm this should also be presented. In particular, the accuracy of small UAV's navigation required during flight is required to be more precise than that of a manned aircraft or a large UAV. It was necessary to calculate a separate navigation error. In this study, we presented a test method for deriving navigation errors that can be applied to UAVs that have difficulty in acquiring long-term operational data, which is different from existing manned aircraft, and conducted verification tests.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.5
• /
• pp.15-24
• /
• 2014

In 2005, there was a partial revision of the Act on the Promotion of Education for the Handicapped people, so that students with health impairments would be able to receive special education support. Since the amendment of the bill, to support them classified into weak people in education, education support systems have been proposed and settled so that they may receive the support for free. According to the pre-study, after the amendment of this bill, there has been many studies on the form of educational service to support them, and recently, there have been a lot of researches to investigate their satisfaction with the current services and draw its problems. And yet these studies have been carried out by the preceeding researchers at the drawing of problems, but have a limitation to present fundamental countermeasures to the problems. Therefore, this study attempted to understand the meaning of health impairment through the pre-study and investigate the forms of the services currently supporting them and analyze the problem of each service. In addition, to solve the identified problems, a new support system was proposed. In order to confirm the performance of the system, we design the user satisfaction survey composed of a Likert 5-point scale per each question, and to make the task, comparing stories and clapping for increasing quality of their subjective evaluation about the image and voice transmission when the user uses it. As a result, in the overall evaluation of the robot system, the average score of each question was recorded to 4.31 points, and through the two tasks, it was found that there were effective data transmission of image and voice.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.1 s.1
• /
• pp.87-94
• /
• 2000

Crack sealing, a routine and necessary part of pavement maintenance, is a dangerous, costly, and labor-intensive operation. Within the North America, about ${\$}200$ million is spent annually on crack sealing, with the Texas Department of Transportation (TxDOT) spending about ${\$}7$ million annually (labor alone accounts for over 50 percent of these costs). Prompted by concerns of safety and cost, the University of Texas at Austin, in cooperation with TxDOT and the Federal Highway Administration (FHWA) has developed a unique computer-guided Automated Road Maintenance Machine (ARMM) for pavement crack sealing. In 1999, successful field tests have been undertaken in 8 States around the U.S. This paper first describes significance of the automated crack sealing and technical advances in automated crack sealers including the ARMM, developed in the U.S. It then discusses the ARMM's field implementation and performance evaluation results, and improvements and modifications suggested through the technology evaluation during the field trials. Current research efforts and future work plans in its further development are also presented in this paper.