• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.270-281
• /
• 2003

E-PON supports efficiently the increased Internet data traffic and efficient bandwidth assignment function by which the shared upstream bandwidth in the broadband access networks. In this paper, when different types of incoming sources are mapped into QoS-aware source and Best-Effort(BE) source, we propose the Dual-GPS schedulaer in E-PON that has the characteristics to provide delay and delay-constraint application, and maximizes the bandwidth to best-effort service. When transmit upstream data in E-PON, The proposed scheme supports the control capabilities of delay and delay-variation for required QoS flow through the novel bandwidth assignment scheme. Simulation results show our scheme outperforms the conventional bandwidth allocation scheme in controlling the delay and delay-variation of E-PON system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.317-322
• /
• 2015

Recently, due to the variety and complexity of marine electronics communication devices, much research has been done to adopt the novel communication protocol. Among them, NMEA2000 protocol, is adopted as standardized protocol to the next generation ship. In this paper, we design and implement the conversion algorithm for sensor protocol based on NMEA2000, and analog data module which convert data format between NMEA2000, CAN, Ethernet, RS232. The present study was designed to implement user-based data monitoring system by supporting various communication protocols through the development and application of key technologies through NMEA2000.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.980-990
• /
• 2004

In this paper, we propose the dynamic bandwidth allocation algorithm for the IEEE802.3ah Ethernet Passive Optical Network(EPON) system to provide the fairness among terminals, and evaluate the delay-throughput performance by simulation. For the conventional EPON systems, an Optical Line Termination (OLT) schedules the upstream bandwidth for each Optical Network Unit (ONU), based on its buffer state. This scheme can provide a fair bandwidth allocation for each ONU. However, it has a critical problem that it does not guarantee the fair bandwidth among terminals which are connected to ONUs. For an example, we assume that the traffic from a greedy terminal increases at a time. Then, the buffer state of its ONU is instantly reported to the OLT, and finally the OW can get more bandwidth. As a result, the less bandwidth is allocated to the other ONUs, and thus the transfer delay of terminals connected to the ONUs gets inevitably increased. Noting that this unfairness problem exists in the conventional EPON systems, we propose a fair bandwidth allocation scheme by OLT with considering the buffer state of ONU as welt as the number of terminals connected it. For the performance evaluation, we develop the EPON simulation model with SIMULA simulation language. From the result of the throughput-delay performance and the dynamics of buffer state along time for each terminal and ONU, respectively, one can see that the proposed scheme can provide the fairness among not ONUs but terminals. Finally, it is worthwhile to note that the proposed scheme for the public EPON systems might be an attractive solution for providing the fairness among subscriber terminals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1490-1494
• /
• 2006

Most network equipment is an embedded system designed to execute specific function. An embedded system is an electronic control system mixing hardware and software to execute only fixed function for the purpose of system, not confuter, performing diverse function for a wide use. Early embedded system executed only simple function, combining specific function with optimization, a micro size, and low power, but it has developed to meet complex and diverse system. The purpose of this study is to realize DHCP server based on embedded system. To achieve this, embedded Linux was ported in ez Bord-M01 mounted with Intel Strong ARM SA1110 processor, and ethernet-based network was constructed for network function. In this way, this study suggests embedded DHCP server where Window and Linux client hosts are dynamically configurated as network information by dynamically assigning network information in embedded board.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.303-312
• /
• 2006

This paper proposes the architecture and protocol of a data communication network for the safety system in nuclear power plants. First, we establish four design criteria with respect to determinability, reliability, separation and isolation, and verification/validation. Next we construct the architecture of the safety network for the following systems: PPS (Plant Protection System), ESF-CCS (Engineered Safety Features-Component Control System) and CPCS (Core Protection Calculator System). The safety network consists of 12 sub-networks and takes the form of a hierarchical star. Among 163 communication nodes are about 1600 origin-destination (OD) pairs created on their traffic demands. The OD pairs are allowed to exchange data only during the pre-assigned time slots. Finally, the communication protocol is designed in consideration of design factors for the safety network. The design factors include a network topology of star, fiber-optic transmission media, synchronous data transfer mode, point-to-point link configuration, and a periodic transmission schedule etc. The resulting protocol is the modification of IEEE 802.15.4 (LR-WPAN) MAC combined with IEEE 802.3 (Fast Ethernet) PHY. The MAC layer of IEEE 802.15.4 is simplified by eliminating some unnecessary (unctions. Most importantly, the optional TDMA-like scheme called the guaranteed time slot (GTS) is changed to be mandatory to guarantee the periodic data transfer. The proposed protocol is formally specified using the SDL. By performing simulations and validations using Telelogic Tau SDL Suite, we find that the proposed safety protocol fits well with the characteristics and the requirements of the safety system in nuclear power plants.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.1-8
• /
• 2011

Actively in progress in the field of general industrial KOLAS (Korea Laboratory Accreditation Scheme) accreditation test the switch, router, network equipment, such as accreditation status in the field can not be found. Company's self-tsting or BMT (Bench Marking Test) through the evaluation process for network equipment, but the test reports issued by accredited laboratories with quality differences. Requested by public institutions or other providers of accredited test reports increasing demand for network equipment in Korea accredited testing laboratory shall be made as soon as possible. In this paper, as required by KOLAS in the field of network equipment testing laboratory accreditation program in the process acquired through the analysis of measurement uncertainty and, to propose effective direction.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.511-523
• /
• 2007

In broadband convergence network(BcN), heterogeneous broadband wired & wireless subnetworks and various terminal equipments will be interconnected. In order to provide end-to-end realtime multimedia services on such heterogeneous networking environment, as a result, two major problems should be resolved: i) Multimedia session establishment & negotiation that adjusts the differences in the capability of multimedia data processing at the end terminal nodes, ii) quality of service(QoS)-guaranteed connection establishment or resource reservation with connection admission control(CAC) in each heterogeneous subnetworks along the path. The session layer signaling(e.g., SIP/SDP) should be extended for QoS negotiation, and must be tightly cooperating with network layer signaling or resource reservation with CAC function. In this paper we propose a session and connection management architecture for the QoS-guaranteed realtime multimedia service provisioning on BcN, with Q-SIP/SDP, resource reservation protocol with traffic engineering extension, and CAC functions. The detailed interaction scenario and related algorithms for QoS-guaranteed realtime multimedia session, resource reservation and connection establishment are explained and analyzed. From the experimental implementation of the proposed scheme on a small scale BcN testbed, we verified that the proposed architecture is applicable for the realtime multimedia service provisioning. We analyze the network performance and QoS parameters in detail.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.95-103
• /
• 2002

We know that the all of warfare system has been becoming complex and variety in warfield thru the Gulf-War. The all of warfare electronic systems is designed to inter-operate by networks in recently. Especially Warfare Equipment systems of Men-of-War(War ship) as like KDX(Korea Destroyer, Experimental), FF(Frigate), PCC(Costal Patrol Craft), Submarine are connected by Combat System Databus to the Command system(C2 System), so C2 system can control all of equipments in ship. In this view, the status of network(Combat System Databus) is very critical parameter in war field. So In this paper, we propose the method of Network Management System construction for War ship, and especially propose the architectural design of network management system for DX(Destroyer, Experimental) equipments using SNMP(Simple Network Management Protocol). And Link Utilization is monitored by simulation. 

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1412-1419
• /
• 2012

In this paper, we propose the protection coordination algorithm using communication methode based on IEC 61850. The communication protocol in power distribution management system has been issued by IEC standard, IEC61850 of them, which was made for substation automation system, has researched to apply into power distribution system, even though the standard is not a suitable for the system. In smart distribution management system' launched in 2009, the communication network based on the ethernet network for IEC 61850 has been designed to apply the self-healing concept, which is to perform the system protection through the communication between remote terminal units(RTU) according to the standard. However, it is first time to apply the scheme in the real. Thus, this paper proposed the protection algorithm and consideration for applying communication method and introduced the result of demonstration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.1023-1030
• /
• 2003

In this paper, we deal with an effective dynamic bandwidth allocation(DBA) scheme in order to support the qualify of services (QoS) in the customer access network which supports various applications with own service requirements. we discuss the DBA scheme for upstream traffic in the EPON which support both the delay sensitive traffic such as voice and real-time video and non-real time traffic such as data and BE. We propose the new DBA scheme which guarantee the delay performance of the real time traffic and utilize the upstream bandwidth effectively in the limited resource environment. We analize the delay performance of the proposed scheme by simulation.