• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Plant Taxonomy
• /
• v.33 no.3
• /
• pp.279-293
• /
• 2003

Somatic chromosomes about 13 taxa of Korean Euphorbia L. was investigated to estimate its taxonomic significance. Somatic chromosome numbers of treated taxa were 2n= 12, 20, 22, 28, 40, 42, 56, therefore basic chromosome numbers of those were x=6, 7, 10, 11. The chromosome numbers of E. pallasii Turcz. (2n=20), E. hylonoma Hand.-Mazz (2n=20.), E. fauriei H. L$\acute{e}$v. & Vaniot ex H. L$\acute{e}$v (2n=28) and E. jolkini Boiss. (2n=28) were determined for the first time in this study. The chromosome numbers of four taxa were same as previous ones; E. sieboldiana Moor. & Decne. (2n=20), E. ebracteolata Hayata (2n=20), E. humifusa Willd. ex Schlecht. (2n=22). But those of six taxa were different; E. esula L (2n= 16, 20, 60, 64 vs 2n=20), E. helioscopia L. (2n=12, 42 vs 2n=42), E. lucorum Rupr. (2n=28, 40 vs 2n=56), E. pekinensis Rupr. in Maxim. (2n=24 vs 2n=28, 56), E. maculata L. (2n=28, 42 vs 2n=12), E. supina Raf. (n=7 vs 2n=40). E. ebracteolata, E. pallasii and E. hylonoma were distingushcd from the other taxa by the chromosome numbers, size and satellites, E. maculata, E. humifusa, E. supina had the different basic and somatic chromosome numbers in spite of the similar morphological. anatomical and palynological chracters. The chromosomal character of Korean Euphorbia was supported the Ma and Hu's systems, and as above results, it was found to be a good character in delimiting above sections and estimating relationships for some species.

• The Journal of Natural Sciences
• /
• v.7
• /
• pp.91-101
• /
• 1995

To establish the simple and practical test method of estimating resistance of rice varieties against rice leafblight, trials were made to correlate among the four test methods such as true resistance test,secondaryinfection test, secondary epidemic test and field test. The results obtained through the experiment on 25 ricevarieties and 3 pathogenic isolates designated to HB9O11, HB9022 and HB9033 can be summarized asfollows. 1 .Based on the results of true resistance test, 25 rice varieties can be classified into four groups:1 )Samgang variety group ;resistant to HB9011, 13 varieties, 2)Pungsan variety group ; resistant to HB9011 and HB9022, 5 varieties, 3)Samgang variety group ; resistant to all three isolates, 2 varieties, 4)Unbongvariety group: sensitive to all three isolates, 12 varieties. 2. The responses of rice varieties to isolates showed some discrepancies among on the test methods. These examples were found in 3 varieties including Yeongdeog varieties to HB9011, 3 varieties including Taebaeg variety to HB9022 and Taebaek vaieties to HB9033. 3. Correlation coefficiences between the secondary infection test and the secondary epidemic test for HB9011, HB9022 and HB9033 were 0.972, 0.894 and 0.919, respectively. It suggests that the two methods are not significantly different so that one of the two methods are not significantly different so that one of the two methods can be omitted from resistant test without affecting the result. 4. Between the true resistance test and the field test at the disease common area, there were no significant correlations. Unbong, Chucheong and Yeongdeog varieties are appeared as resistant varieties in the true resistant test, but their responses in the field test were different and appeared as sensitive varieties. 5. The disease index was used to express theresults from four test methods. The disease index was calculated as the sum of each numerical values of theresults from the four test methods by giving the same weights(0 to 25)to each test method. If the disease index for certain variety is less than 15, then the variety is considered to be resistant. 4 varieties such as Seohae, Hwajin, Yeongdeog and Pungsan varieties-disease indices were less than 15 were selected as field resistance varieties.

• Korean Journal of Plant Resources
• /
• v.28 no.1
• /
• pp.101-110
• /
• 2015

Parameters of mating system and pollen flow of a Pinus densiflora population in Buan, South Korea, were estimated using seven nuclear microsatellite markers. The expected heterozygosity ($H_e$) was 0.614 in mother trees and 0.624 in seeds. Fixation index (F) was 0.018 and 0.087 in each generation. There was no significant genetic difference between the generations (P > 0.05). From MLTR, the outcrossing rate ($t_m$), the biparental inbreeding ($t_m-t_s$), and the correlation of paternity ($r_p$) were 0.967, 0.057, and 0.012, respectively. tm was larger but $t_m-t_s$ and $r_p$ were smaller than those of allozyme markers in Pinus densiflora. These values were similar to those of microsatellite markers in other pine species. The optimal pollen dispersal model from TwoGener was the normal dispersal model with the effective density of 220 trees/ha and its level of genetic differentiation in pollen pool structure (${\Phi}_{ft}$) was 0.021. The average radial distance of pollen flow (${\delta}$) was calculated as 11.42 m, but no correlation between the pairwise-${\Phi}_{ft}$ and the geographical distance among mother trees was at Mantel test (r = -0.141, P > 0.05). Although the effective pollen dispersal in the population seems to be restricted, the amount of genetic variation might be maintained in each generation without a loss of genetic diversity. It might be because the genetic diversity in pollen pool was high but the genetic difference between pollen donors was small under the complete random mating condition in the Pinus densiflora population in Buan.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.371-379
• /
• 2004

The purpose of this study was to investigate the changes and types of statistical methods used in the Korean Journal of Orthodontics (KJO) and the American Journal of Orthodontics and Dentofacial Orthopedics (AJODO) from )999 to 2003. The frequency of use, transitions, assumption check of statistical methods and types of advanced statistical methods were examined from each journal. The study consisted of 247 articles published in the KJO and randomly chosen 50 articles per year which were original articles and used statistical methods T-test, analysis of variance(ANOVA), correlation analysis, nonparametric analysis. regression analysis chi-square test. factor analysis, were the order of statistical methods most frequently used in the KJO, while t-test. ANOVA, nonparametric analysis, correlation analysis, regression analysis, chi-square test. factor analysis. were the order of statistical methods used in the AJODO The changes of statistical methods observed in the KJO were not significant $(X^2=17.4\;p=0.5881)$ but the changes observed in the AJODO was seen to be significant $(x^2=42.4,\;p=0.0397)$ Some of the studies examined had overlooked the assumptions of the statistical methods employed. Data investigation such as outlier should be performed before analysis and alternative statistical approaches are applied for a small sample size. Types of advanced statistical methods were factor analysis and discriminant analysis in the KJO and Intention-To-Treat (ITT) analysis in clinical trials through multi-center, survival analysis and Generalized Estimating Equations (GEE) in the AJODO. Appropriate analysis approaches and interpretations should be applied for the correlated and repeated measurements of the orthodontic data set.

• Korean Journal of Environment and Ecology
• /
• v.25 no.5
• /
• pp.787-798
• /
• 2011

An arboretum is defined as a collection of facilities that conserve plant species by surveying, collecting, and proliferating and preserving the plants in nature, perform diverse researches on plants and display the plants in exhibition spaces or outdoors as well as provide the public with educational programs and refreshment spaces according to the laws concerned. The public, however, recognizes the exhibition and education functions on plants of arboretum more importantly compared with the roles to survey, collect, and proliferate plants as regulated by the laws. In particular, arboretum plays a role to offer a pivotal educational place in urban area where the public can obtain an hands-on experience and understanding on a wide range of plant species and natural environment. The study aims to estimate the non market environmental values of Daegu Arboretum operated by Daegu Metropolitan City government by using the Contingent Valuation Methods (CVM), which yields the current monetary estimates for the arboretum. The value estimation was undertaken by using the Double-Bound Dichotomous Choice (DBDC) method, and each estimated value was derived from respective functions based on a logit distribution known to include relatively stable estimates according to the shape of the distribution. Considering the statistical fitness test results, the author estimated the amounts of the Willingness To Pay (WTP) such as mean WTP of 12,718 KRW, median WTP of 11,033 KRW, and truncated mean WTP of 11,468 KRW, which represented the annual recreational values per a person visiting Daegu Arboretum respectively. The analysis showed that Daegu Arboretum created the annual environmental values which were estimated to be approximately 16 to 19 billion KRW. The study also has an implication that the valuation method for the environment of Daegu Arboretum may be effectively applied for estimating the values of other types of environmental goods by altering the locations or goods to be analyzed.

• Korean Journal of Ichthyology
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2009

The effect of water temperature on fasting and post-prandial total ammonia excretion (TAN) of the starry flounder Platichthys stellatus (mean body weigh : $42.4{\pm}3.4g$) was studied. The fasting and post-prandial TAN excretions were measured under three different water temperatures (10, 15 and $20^{\circ}C$) for 24 hours using a recirculating system. In each treatment three replicates were set up and total 45 fish were used. Fish were taken to the indoor aquarium, acclimated over 10 days at three temperatures, and transferred to TAN measuring system for measurements of TAN excretion at the same temperatures. After 3 days of starvation, fasting TAN excretion was measured at each temperature. To investigate post-prandial TAN excretion, fish were hand-fed to satiation level with a commercial diet containing 50.2% crude protein for 7 days, two times daily 08 : 00 and 16 : 00 h. The fasting and postprandial TAN excretion increased with increased water temperature (p<0.05). Mean fasting TAN excretion rates at 10, 15 and $20^{\circ}C$ were 10.9, 11.2 and $12.2mg\;TAN\;kg\;fish^{-1}\;h^{-1}$, respectively. The value at $20^{\circ}C$ was higher than those at 10 and $15^{\circ}C$ (p<0.05), but there was no significant difference between $10^{\circ}C$ and $15^{\circ}C$. Mean post-prandial TAN excretion rates at 10, 15 and $20^{\circ}C$ were 33.0, 43.4 and $55.3mg\;TAN\;kg\;fish^{-1}\;h^{-1}$, respectively. Two peaks of post-prandial TAN excretions were observed, and the second peak was always greater than the first. The post-prandial TAN excretion rate reached to the maximum after 10 hours from the first feeding at $10^{\circ}C$($45.3mg\;TAN\;kg\;fish^{-1}\;h^{-1}$), $15^{\circ}C$ ($64.5mg\;TAN\;kg\;fish^{-1}\;h^{-1}$) and $20^{\circ}C$ ($83.2mg\;TAN\;kg\;fish^{-1}\;h^{-1}$), respectively. The TAN loss for ingested nitrogen at $20^{\circ}C$ (48.8%) was higher than that for $10^{\circ}C$ (43.0%) and $15^{\circ}C$ (45.7%). This study provides empirical data for estimating ammonia excretion and managing culture management of starry flounder under given temperatures.

• Journal of agricultural medicine and community health
• /
• v.36 no.2
• /
• pp.113-119
• /
• 2011

The aims of this study were to survey, evaluate the accuracy of personal immunization record of vaccination card, and to establish the applicability of personal immunization record for presuming population based immunization rate and evaluation method. In 2005, a population-based survey of 12-35 months old children was carried out in Nonsan, Korea. We conducted household survey and provider check using questionnaire and checklist to obtain data on immunization status for children. Total 11 vaccinations were checked in vaccination card such as BCG, hepatitis b, polio, chickenpox vaccine. For estimating accuracy of immunization status and dates of immunization, we estimated correspondence rate between data from personal vaccination card and data from medical records and immunization registry data. Accuracy of the child's vaccination card by type of National Immunization Program vaccine in whole medical institutions were from 41.8% to 83.2%. Accuracy for the date of vaccination of vaccination card in National Immunization Programme vaccine were from 55.3% to 89.7%. In spite of this study limitations, this study verified the validity of vaccination record of vaccination card substantially, but suggests more efforts to reassure the validity of vaccination card.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.1
• /
• pp.23-31
• /
• 2013

Microwave remote sensing can help monitor the land surface water cycle and crop growth. This type of remote sensing has great potential over conventional remote sensing using the visible and infrared regions due to its all-weather day-and-night imaging capabilities. In this paper, a ground-based multi-frequency (L-, C-, and X-band) polarimetric scatterometer system capable of making observations every 10 min was developed. This system was used to monitor the wheat over an entire growth cycle. The polarimetric scatterometer components were installed inside an air-conditioned shelter to maintain constant temperature and humidity during the data acquisition period. Backscattering coefficients for the crop growing season were compared with biophysical measurements. Backscattering coefficients for all frequencies and polarizations increased until dat of year 137 and then decreased along with fresh weight, dry weight, plant height, and vegetation water content (VWC). The range of backscatter for X-band was lower than for L- and C-band. We examined the relationship between the backscattering coefficients of each band (frequency/polarization) and the various wheat growth parameters. The correlation between the different vegetation parameters and backscatter decreased with increasing frequency. L-band HH-polarization (L-HH) is best suited for the monitoring of fresh weight (r=0.98), dry weight (r=0.96), VWC (r=0.98), and plant height (r=0.96). The correlation coefficients were highest for L-band observations and lowest for X-band. Also, HH-polarization had the highest correlations among the polarization channels (HH, VV and HV). Based on the correlation analysis between backscattering coefficients in each band and wheat growth parameters, we developed prediction equations using the L-HH based on the observed relationships between L-HH and fresh weight, dry weight, VWC and plant height. The results of these analyses will be useful in determining the optimum microwave frequency and polarizations necessary for estimating vegetation parameters in the wheat.