• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.259-268
• /
• 2012

This paper aims to estimate the carbon dioxide stocks in forests using airborne LiDAR data with a density of approximate 4.4 points per meter square. To achieve this goal, a processing chain consisting of bare earth Digital Terrain Model(DTM) extraction and individual tree top detection has been developed. As results of this experiment, the reliable DTM with type-II errors of 3.32% and tree positions with overall accuracy of 66.26% were extracted in the study area. The total estimated carbon dioxide stocks in the study area using extracted 3-D forests structures well suited with the traditional method by field measurements upto 7.2% error level. This results showed that LiDAR technology is highly valuable for replacing the existing forest resources inventory.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.719-731
• /
• 2008

This paper defines QoE (Quality of Experience) for multi-view video streaming service over WiBro and proposes the CLO (Cross-Layer Optimization) algorithm can maximize this. Proposal CLO algorithm contains from physical layer to video layer. Under the time-varying wireless channel condition, the CLO technique takes view-wise and the temporal priority of the multi-view video into consideration in order to decide the transmission of frames and its FEC level. At the handover situation, it is shown through computer simulation that the optimal quality of the multi-view video can be achieved using the minimum amount of resources if the proposed CLO technique is applied.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.111-114
• /
• 2008

Adsorption isotherm with the most fundamental information related to chromatography process is obtained experimentally. The adsorption isotherm of 2-deoxyuridine (dUrd) and 2-deoxycytidine (dCyd) with ${\mu}$-Bondapak $C_{18}$, static method was adopted in RP-HPLC. The concentrations of mobile and stationary phases were measured with different initial concentrations of dUrd and dCyd, 1, 3, 5, 7, 10 mg/mL, respectively. The adsorption isotherm data were applied by Freundlich, Langmuir, Sips, and Radke-Prausnitz model equations. As a result of the regression analysis, standard error between adsorption isotherm of dUrd and Radke-Prausnitz equation was very low, and adsorption isotherm of dCyd was in an agreement with Sips equation very well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.4072-4089
• /
• 2018

This paper introduces a scheme for optimizing the material properties of mass-spring systems of different resolutions to provide coherent behavior for reduced level-of-detail in MSS(Mass-Spring System) meshes. The global optimal material coefficients are derived to match the behavior of provided reference mesh. The proposed method also gives us insight into levels of reduction that we can achieve in the systematic behavioral coherency among the different resolution of MSS meshes. We obtain visually acceptable coherent behaviors for cloth models based on our proposed error metric and identify that this method can significantly reduce the resolution levels of simulated objects. In addition, we have confirmed coherent behaviors with different resolutions through various experimental validation tests. We analyzed spring force estimations through triangular Barycentric coordinates based from the reference MSS that uses a Gaussian kernel based distribution. Experimental results show that the displacement difference ratio of the node positions is less than 10% even if the number of nodes of $MSS^{sim}$ decreases by more than 50% compared with $MSS^{ref}$. Therefore, we believe that it can be applied to various fields that are requiring the real-time simulation technology such as VR, AR, surgical simulation, mobile game, and numerous other application domains.

• Atmosphere
• /
• v.21 no.1
• /
• pp.85-93
• /
• 2011

UK Met Office Unified Model (UM) is a grid model applicable for both global and regional model configurations. The Met Office has developed a 4D-Var data assimilation system, which was implemented in the global forecast system on 5 October 2004. In an effort to improve its Numerical Weather Prediction (NWP) system, Korea Meteorological Administration (KMA) has adopted the UM system since 2008. The aim of this study is to provide the basic information on the effects of satellite data assimilation on UM performance by conducting global satellite data denial experiments. Advanced Tiros Operational Vertical Sounder (ATOVS), Infrared Atmospheric Sounding Interferometer (IASI), Special Sensor Microwave Imager Sounder (SSMIS) data, Global Positioning System Radio Occultation (GPSRO) data, Air Craft (CRAFT) data, Atmospheric Infrared Sounder (AIRS) data were assimilated in the UM global system. The contributions of assimilation of each kind of satellite data to improvements in UM performance were evaluated using analysis data of basic variables; geopotential height at 500 hPa, wind speed and temperature at 850 hPa and mean sea level pressure. The statistical verification using Root Mean Square Error (RMSE) showed that most of the satellite data have positive impacts on UM global analysis and forecasts.

• Korea Journal of Hospital Management
• /
• v.11 no.1
• /
• pp.91-109
• /
• 2006

This study was conducted to find out factors affecting patient safety management activities at nursing devisions of two university hospitals. The indicators of patient safety activities used in the study were selected from Hospital Survey on Patient Safety Culture which was developed by The Agency for Healthcare Research and Quality in the United States. Data were collected from 372 nurses working at inpatient wards at two university hospitals located in Seoul and Won-Ju cities through the self-administered questionnaires, and analyzed using frequency analysis, t-test, correlation, and regression analysis. The result of this study were as follows. First, The mean of patient safety management activities was 3.41 which was a little bit higher than the average level. The mean of communication within the ward was the highest, whereas that of patient safety management culture was the lowest. Second, there were significant differences in the perception of nurses on patient safety management activities in terms of the educational background, length of employment, and work hours per week. Third, three variables of communication within the unit, attitude of top management, and attitude of nurses have significant positive effects on patient safety management activities. Fourth, 37.4% of the variation in the patient safety management activities was explained by the study variables. In conclusion, hospital administration and nursing managers should make an effort to learn the knowledge of patient safety program, show their deep interest on the patient safety to the employees and motivate them to communicate effectively each other within the work unit to develop a good patient safety culture and system.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.39-45
• /
• 2014

PURPOSE. The aim of the present study was to evaluate the accuracy of three techniques for correction of cast implant bars. MATERIALS AND METHODS. Thirty cast implant bars were fabricated on a metal master model. All cast implant bars were sectioned at 5 mm from the left gold cylinder using a disk of 0.3 mm thickness, and then each group of ten specimens was corrected by gas-air torch soldering, laser welding, and additional casting technique. Three dimensional evaluation including horizontal, vertical, and twisting measurements was based on measurement and comparison of (1) gap distances of the right abutment replica-gold cylinder interface at buccal, distal, lingual side, (2) changes of bar length, and (3) axis angle changes of the right gold cylinders at the step of the post-correction measurements on the three groups with a contact and non-contact coordinate measuring machine. One-way analysis of variance (ANOVA) and paired t-test were performed at the significance level of 5%. RESULTS. Gap distances of the cast implant bars after correction procedure showed no statistically significant difference among groups. Changes in bar length between pre-casting and post-correction measurement were statistically significance among groups. Axis angle changes of the right gold cylinders were not statistically significance among groups. CONCLUSION. There was no statistical significance among three techniques in horizontal, vertical and axial errors. But, gas-air torch soldering technique showed the most consistent and accurate trend in the correction of implant bar error. However, Laser welding technique, showed a large mean and standard deviation in vertical and twisting measurement and might be technique-sensitive method.

• Survey Research
• /
• v.5 no.1
• /
• pp.27-49
• /
• 2004

Recently, in several countries including South Korea, the percentage of households having fixed telephones, which is often called the fixed telephone coverage rates, has decreased due to a rapid spread of mobile phones. It is generally assumed that the lower the rates of coverage, resulting in a major frame undercoverage problem, the greater the possibility of the bias. In this paper, we first take a look at the changes of coverage rates in both fixed telephones and mobile phones in South Korea and examine the coverage rates by sociodemographic characteristics of households. Also, we refer to a change in the level of fixed telephone noncoverage and the resulting problems in the situation. Second, we provide a comparison of the coverage rates for households for some European countries, the United States, Canada etc. Finally, we suggest further research to rise to our research environments increasingly troublesome, owing to the wide spread of mobile phones.

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.21-31
• /
• 2012

The purpose of this study is to find the influence of Chinese falling-rising tone on the pitch pattern of corresponding partly-different-form-same-meaning Sino-Korean words delivered by Chinese learners of Korean and to examine how the falling-rising tone of corresponding Chinese words affects the pitch patterns of Sino-Korean words. The scope of this research is limited to Chinese learners of Korean, especially on two groups of Sino-Korean words - AB:CB type and AB:AC type that the are second-most frequently occuring different-form-same-meaning Sino-Korean words. In this study, Chinese learners pronounced both Chinese words and corresponding Sino-Korean words. Learners' pitch patterns were recorded and analyzed using software and compared with the tone of corresponding Chinese words. Experimental results showed that AB:CB type Sino-Korean words were not affected by Chinese 'falling-rising tone - high and level tone'. As well as AB:CB type, experimental results showed there were no significant influence on the pitch pattern of AB:AC type Sino-Korean words by Chinese falling-rising tone. But it was clear that Chinese learners' made pitch errors on both AB:CB type and AB:AC type Sino-Korean words. In conclusion, the Chinese learners' pitch patterns of partly-different-form-same-meaning Sino-Korean words are different from Korean native speakers', but their pitch errors cannot be attributed to Chinese falling-rising tone.