• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.80-87
• /
• 2007

In this paper, link-level performance of a OFDMA technique, which has been considered as a standard for 802.16, 802.20, 3G-LTE, WiMax, and WiBro, is evaluated for next-generation wireless communication systems. While many researches have focused on uncoded forward-link performances, this paper provides a coded performance of a reverse-link OFDMA system. Performance degradation due to time offset among reverse-link users and frequency offset during FFT process is investigated. Transmitter and receiver antenna diversity techniques are used to overcome performance degradation. Performance of a OFDMA system is compared with a CDMA system in terms of FER and throughput to emphasize the advantage of OFDMA system for a reverse-link. Finally, under given specification, Eb/No required to achieve the maximum throughput of a reverse-link is proposed considering various coded rates and antenna permutations.

• Survey Research
• /
• v.12 no.3
• /
• pp.25-48
• /
• 2011

In this paper, we overview the sample design, sampling error, non-response rate and prediction errors of the exit poll conducted for 2010 local elections and discusses how to detect a prediction bias in exit poll. To investigate the bias problem in exit poll in regional(Si-Do) level, we analyze exit poll data for 2007 presidential election and 2006 local elections as well as 2010 local elections in Korea. The measure of predictive accuracy A proposed by Martin et al.(2005) is used to assess the exit poll bias. The empirical studies based on three exit polls clearly show that there exits systematic bias in exit poll and the predictive bias of candidates affiliated to conservative party (such as Hannara-Dang) is serious in the specific regions. The result of this study on systematic bias will be very useful to improving the exit poll methodology in Korea.

• Journal of East-West Nursing Research
• /
• v.24 no.1
• /
• pp.44-51
• /
• 2018

Purpose: The purpose of this study was to examine the actor and partner effects of self efficacy, marital adjustment and family support on Yangseang in infertile couples using the actor-partner interdependence model. Methods: The participants were 108 infertile couples. Data were collected using the Yangsaeng Scale, Infertility Self Efficacy Scale, Revised Dyadic Adjustment Scale, and Perceived Social Support Scale from March to April in 2016. The Actor-Partner Interdependence Model was used to analyze the actor and partner effects of self-efficacy, marital adjustment and family support on Yangsaeng. Results: The fit indices for the model were Comparative Fit Index (CFI) = 0.99, Normed Fit Index (NFI) = 0.99, Tucker-Lewis Index (TLI) = 0.90, and Root Mean Square Error of Approximation (RMSEA) = 0.01, which met the criteria. We found that only self efficacy had an actor effect on Yangsaeng. Marital adjustment and family support of infertile husbands had an actor effect on the Yangsaeng. In addition, marital adjustment showed an interaction effect. Conclusions: The findings of this study indicate that the level of Yangseang in infertile couples was positively associated with the levels of self efficacy and martial adjustment. Partner effects may be hidden due to much stronger actor effects on Yangseang.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.79-89
• /
• 2015

This study aims to design and implement a traffic model that can simulate the traffic behavior on the microscopic level by using the GIS. In the design of the model, the vehicle in the simulation environment recognizes the GIS road centerline data as road network data reflecting number of lanes, speed limit and so on. In addition, the behavior model was designed by dividing functions into the environmental perception model, time headway distribution model, car following model, and lane changing model. The implemented model was applied to Jahamun-road of Jongno-gu district to verify the accuracy of the model. As a result, the simulation results on the Jahamun-road had no great error compared with the actual observation data. In the aspect of usability of model, it is judged that this model will be able to effectively contribute to analysis of amount of carbon emission by traffic, evaluation of traffic flow, plans for location of urban infrastructure and so on.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.177-188
• /
• 1993

Model parameters of the WASP4 applied to Lake Paldang were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating each group of parameters by a trial-and-error procedure. Chlorophyll a, nitrogen cycles, phosphorus cycles, BOD and DO were simulated at the complexity level 4. A water budget analysis using the monthly records of reservoir inflows and outflows in 1989 and 1990 was made to determine seasonally-averaged flowrates at model boundaries. Estimated flowrates were used, together with the seasonal average of water quality measurements in 1989 and 1990 for the calibration and verification, respectively, of the model. Grouping water quality constituents and associated parameters proved to be efficient in estimating a number of model parameters. From the results of model calibration and verification, it was found that quantitative evaluations of nonpoint and benthic sources of organic matters are essential. Benthic sources near the entrance of the Kyeongancheon were the most significant.

• Journal of Advanced Marine Engineering and Technology
• /
• v.3 no.1
• /
• pp.19-31
• /
• 1979

Recently the adaptive control system, which keeps the control system always optimal by adjusting the control parameters automatically according to the variations of the plant parameters, have become very important in the field of control engineering. The adaptive control systems are usally composed of the plant identification, the decision of the optimal control parameters, and the adjustment of the control parameters. This paper deals with a method of the adaptive control system when PI or PID controller is used in the feed back control system. Its controlled object (the plant) is assumed to be described by the transfer function of $\frac{ke^{-LS}}{1+TS}$ where k, T and L are steady state gain, time constant and pure dead time respectively, and their values are variable in accordance with the change of environmental circumstance. It has been known that a pseudo-random binary signal is quite effective for the measurement of an impulse response of a plant. In adaptive control systems, however, the impulse response itself is not appropriate to determine the control parameters. In this paper, the authors propose a method to estimate directly the parameters of the plant k, T and L by means of the correlation technique using 3 level M-sequence signal as a test signal. The authors also propose a method to determine the optimal parameters of the PI or PID controller in the sense of minimizing the square integral of the control error in the feed back control system, and the values of the optimal parameters are computed numerically for various values of T and L, and the results are examined and compared with those of the conventional methods. Finally the above-mentioned two methods are combined and an algorithm to struct an adaptive control system is suggested. The experiments for the indicial responses by means of both the model of the temperature control system using SCR actuater and the analog simulations have shown good results as expected, and the effectiveness of the proposed method is verified. The M-sequence generator and the time delay circuit, which are manufactured for the experiments, are operated in quite a good condition.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.47-56
• /
• 1999

In this study, tie point observation in aerial triangulation was automated by the image processing methods. The technique includes boundary extraction and We matching processes. The procedures were applied to extract points of Interest and to find their conjugate points in the other images. The image coordinates of the identified points were then used to compute their absolute coordinates. An algorithm was developed in this study for the automation of observation in aerial triangulation, which is a manual process of selecting a tie point and recording the image coordinate of the selected point. The developed algorithm automates this process through the application of a mathematical operator to extract points of interest from an arbitrary image. The root m square error of image coordinates of the developed algorithm is $6.8{\mu}m$, which is close to that of the present analytical method. In a manual environment, the accuracy of the result of a photogrammetric process is heavily dependant on the level of skill and experience of the human operator. No such problem exists in an automated system. Also, as a result of the automated system, the time spent in the observation process could be reduced by a factor of 61.2%, thereby reducing the overall cost.

• Molecules and Cells
• /
• v.37 no.12
• /
• pp.888-898
• /
• 2014

Pancreatic cancer is one of the most fatal cancers and is associated with limited diagnostic and therapeutic modalities. Currently, gemcitabine is the only effective drug and represents the preferred first-line treatment for chemotherapy. However, a high level of intrinsic or acquired resistance of pancreatic cancer to gemcitabine can contribute to the failure of gemcitabine treatment. To investigate the underlying molecular mechanisms for gemcitabine resistance in pancreatic cancer, we performed label-free quantification of protein expression in intrinsic gemcitabine-resistant and -sensitive human pancreatic adenocarcinoma cell lines using our improved proteomic strategy, combined with filter-aided sample preparation, single-shot liquid chromatography-mass spectrometry, enhanced spectral counting, and a statistical method based on a power law global error model. We identified 1931 proteins and quantified 787 differentially expressed proteins in the BxPC3, PANC-1, and HPDE cell lines. Bioinformatics analysis identified 15 epithelial to mesenchymal transition (EMT) markers and 13 EMT-related proteins that were closely associated with drug resistance were differentially expressed. Interestingly, 8 of these proteins were involved in glutathione and cysteine/methionine metabolism. These results suggest that proteins related to the EMT and glutathione metabolism play important roles in the development of intrinsic gemcitabine resistance by pancreatic cancer cell lines.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.261-269
• /
• 2013

In this paper, the evoked potential(EP) was represented by additive delay model to comply with the variational noisy response of stimulus-event synchronization. The hybrid method of delay compensated-Wiener filtered-ensemble averaging(DWEA) was proposed to enhance the EP signal distortion occurred during averaging procedure due to synchronization timing mismatch. The performance of DWEA has been tested by surrogated simulation, which is composed of synthesized arbitrary delay and arbitrary level of added noise. The performance of DWEA is better than those of Wiener filtered-ensemble averaging and of conventional ensemble averaging. DWEA is endurable up to added noise gain of 7 for 10 % mean square error limit. Throughout the experimentation observation, it has been demonstrated that DWEA can be applied to enhance the evoked potential having the synchronization mismatch with added noise.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.145-152
• /
• 2017

In this paper, GNSS(global navigation satellite system) to monitoring the fine for the construction of structure displacement based on satellite communications signals of GNSS. At the same time on USN(ubiquitous sensor network) and proposed a new approach to precise positioning by analyzing the results. A major construction structure for the safety diagnosis and prevent disaster from the risk of collapse. Precision measurement methods to mm level GNSS in that case and experiments in the application of new technologies that can most commonly used to replace the current through the permanent. The way a GNSS baseline and tested it on to prove. As a result, at our country at precise positioning and fine displacement monitoring application virtual reference station(VRS) in a GNSS mm of a margin of error of horizontal and vertical directions can be found.