• Title/Summary/Keyword: Erbium-doped fiber

Search Result 140, Processing Time 0.026 seconds

Gain-Clamping using feedback loop and Gain-Flattening in Erbium-doped Fiber Amplifiler (피드백을 이용한 이득 고정과 평탄한 이득을 가진 EDFA)

  • 이형주;김용평
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.08a
    • /
    • pp.144-145
    • /
    • 2000
  • 파장 분할 다중화(WDM)기술은 빠른 속도로 발전해 왔으며, 이에 대한 연구는 계속되고 있다. 전송용량의 증가에 의해 전송 채널의 수가 증가하고 이에 따라 이득 대역도 더 넓어져야한다.$^{(1)}$ 파장 분할 다중화(WDM) 시스템의 구성에서 어븀 첨가 광섬유 증폭기(EDFA)는 시스템의 핵심 요소로 각 단계마다 몇 개씩의 EDFA가 사용된다. EDFA에서는 이득의 변화가 10 ms정도로 천천히 일어나므로 입력의 평균값에 의해 이득이 결정된다. 따라서, EDFA는 모든 채널의 입력의 합이 일정할 때 이득의 상호 포화로 인한 채널 간의 누화가 없다는 장점이 있기 때문에 다채널 WDM 시스템의 광섬유 증폭기로 매우 유용하게 이용되고 있다.$^{(2)}$ (중략)

  • PDF

Consideration for the Repeaterless Transmission in Long Distance Optical Submarine Cable System (장거리 해저 무중계 전송기술 연구)

  • Park, Hong-Tae;Kim, Chun-Suk
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.2 no.1
    • /
    • pp.40-45
    • /
    • 2007
  • The repeaterless system can be designed by applying EDFA technology in receiver, transmitter and optical cable in the case of connecting several hundred km from coast to coast, between continents or islands. Because of no repeater the repeaterless system do not need power system to feed laser diode in repeater for signal amplification and cooper tuber in submarine cable. So we can be configured more reliable and economical compared to repeater system. But lower loss optical fiber must be used to get enough signal amplitude without the amplification of repeater. This report consider long distance optical repeaterless system by reflecting the limitation factor of optical amplification.

  • PDF

320km Optical Transmission using EDFA and Raman amplifier for 10Gbit/s 128 Channel DWDM Signals (10 Gbit/s 128 채널 고밀도 파장다중화 신호를 위해 EDFA와 라만 증폭기를 이용한 320km 광전송 실험)

  • Choi, Bo-Hun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.6B
    • /
    • pp.568-574
    • /
    • 2009
  • 320km optical transmission link for 128 channel DWDM (dense wavelength-division-multiplexing) signals is simulated and fabricated. An optical fiber amplifier for the link is composed of a distributed Raman amplifier and dual C/L-band EDFAs which are optimized for the performances of an optical amplifier obtained from the simulation. Gain and NF of the optimized EDFAs are above 19dB and below 7.5dB, respectively. The resultant OSNRs (optical signal to noise ratios) of the link are average 25dB on each band.

Automatic Gain Flattening Control and Automatic Gain Control Using an All Optical Method in an Optical Amplifier (광증폭기의 이득과 이득 평탄화를 동시에 자동 제어하는 완전 광학적 방법)

  • Choi, Bo-Hun;Lee, Sang-Soo
    • Korean Journal of Optics and Photonics
    • /
    • v.20 no.5
    • /
    • pp.261-265
    • /
    • 2009
  • Our amplifier using an all optical method and a fixed GFF achieved automatic gain flatness throughput the C-band without any NF degradation, and simultaneously achieved a constant 25 dB gain, while input signals were varied between one channel and forty WDM channels. When thirty nine channels were added and dropped, the transient gain variation of the survival channel was not greater than the steady-state gain variation, and its wavelength dependency was negligible.

1.6 Tb/s (160x10 Gb/s) WDM Transmission over 2,000 km of Single Mode Fiber (1.6 Tb/s (160x10 Gb/s) WDM 신호의 단일 모드 광섬유 2,000 km 전송)

  • 한진수;장순혁;이현재
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.7A
    • /
    • pp.712-718
    • /
    • 2004
  • We report 1.6 Tb/s (160${\times}$10 Gb/s) WDM transmission over 2,000 km of single mode fiber using distributed hybrid(distributed Raman amplifier+Erbium-doped fiber amplifier) optical amplifiers. After transmission over 2,000 km of single mode fiber, average optical signal to noise ratios of C/L-band were 20.5 dB, 21.9 dB, respectively. The minimum Q-factors of each band were 14.65 dB (BER=5.8e-8) in C-band, 13.75 dB (BER=5.0e-7) in L-band without forward error correction. We performed 1.6 Tb/s error-free transmission over 2,000 km of single mode fiber using Reed-Solomon (255, 239) forward error correction code.

Optical transmission technology of Ultra high-speed and Ultra long distance (초고속 초장거리 광전송 기술)

  • 이봉영
    • Information and Communications Magazine
    • /
    • v.11 no.2
    • /
    • pp.77-89
    • /
    • 1994
  • High speed optical fiber transmission technology has been remarkably improved during the past 20 years. This paper presents recent research status and future technological issues for the future information society, that is, the Tb/s transmission by frequency division multiplexing and the ultra long-distance by optical soliton transmission. Erbium-doped fiber amplifier and recent optical technology have brought optical transmission system of up to 10 Gb/s to the point of commercialization. Taking into account the future super information highway, that is, B-ISDN network, ultra wide-band picture-based information can be provided for many subscribers via existing optical fiber cables. However, to achieve the high speed transmission, the technologies must be developed not only for transmission lines but also for transmission nodes. Since the conventional signal transmission/processing technique using electronics has the limit in its speed, novel photonic technology is being developed for this purpose. On the other hand, optical solitons propagate stably through optical fibers, without pulse broadening effect of the fiber dispersion. Since the pulse broadening effect becomes serious as the transmission speed increases, optical solitons is the important technologies to realize the high speed, long distance transmission.

  • PDF

Long haul transmission link using a optimized circulating loop for optical wavelength division multiplexing signals (최적화된 반복루프를 이용한 파장분할다중화 광신호 장거리 전송)

  • Choi, Bo-Hun
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.7
    • /
    • pp.1757-1763
    • /
    • 2014
  • Optical wavelength division multiplexing signals of eight non-return-to-zero 10 Gb/s channels were transmitted on the long-haul link up to 720 km. The link span was composed of 80 km single mode fiber, dispersion compensation fiber for complete compensation, and EDFAs. A circulating loop method was applied to the link experiment and the loop was optimized for the transmission link. Wavelength-dependent gain variation of EDFA was compensated using EDFAs of opposite gain slopes without expensive gain flattening filters. Average OSNR was aggravated to 22 dB and the worst OSNR channel variation was 9.7 dB after the transmission. It was confirmed by analyzing optical spectra that this OSNR variation was mainly caused by the hole burning effect of EDFA.

The Characteristics of Transient Response vs. Lasing Wavelengths and Directions in Gain-Clamped L-band EDFA (고정이득 L-band EDFA에서 발진 파장 및 방향에 따른 과도응답 특성)

  • Kim Ik sang;Kim Chang bong;Yang Heng;Sohn Young ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.3A
    • /
    • pp.160-167
    • /
    • 2005
  • The gain-clamped EDFA has been developed to eliminate the output power change of WDM surviving channels to occur with added or dropped channels, which degrades the performance of WDM optical network. It maintains the constant gain of surviving channels when WDM channels are added or dropped in a network amplifying node. In this paper, the hi-directionally pumped gain-clamped EDFA is implemented to compensate the change of the input power by a lasing. The results show that the lasing of a short wavelength and backward propagation is the optimal condition to minimize the transient response of surviving channels in terms of the overshoot and gain saturation due to the inhomogeneous broadening effect.

Pump Effect by Injected C-band laser in L-band EDFA (L-band EDFA에서 주입된 C-band laser에 의한 펌프 효과)

  • 김익상;김동욱;김창봉
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.5A
    • /
    • pp.484-491
    • /
    • 2004
  • C-band pumping effect appears in L-band EDFA because the absorption in C-band occurs dominant under the condition of such a low average population inversion. In this paper, we show how the C-band pumping effect depends on 980nm pump power, the C-band wavelength, and its input power. The C-band pumping is caused by absorbing C-band injection or backward spontaneous emission power through EDF. If the same small signal condition is given by a C-band pump, the C-band pump of a long wavelength is good for the saturation and noise characteristics of L-band signal. Finally, it is considered that in the aspect of saturation characteristics, C-band compensation is not so much efficient as L-band in Gain-Clamped L-band EDFA having a lossy resonator.

A Construction Scheme of Next Generation Wire Communication System by using Long-reach WDM-PON (장거리 전송 파장분할 다중방식 수동형 광가입자망을 이용한 차세대 국방 유선통신체계 구축방안)

  • Kim, Min-Hwan;Lee, Sang-Mook;Lee, Chang-Hee
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.10 no.2
    • /
    • pp.90-99
    • /
    • 2007
  • We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.