• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.879-882
• /
• 1999

The effects of the substrate bias on the performance of programming erasing in p-channel flash memory cell have been investigated. It is found that applying positive substrate bias can improve the programming and erasing speed. This improvements can be explained by Substrate Current Induced Hot Electron Injection. From the results, we can confirm that BTB programming method is better in programming and erasing speed than CHE programming method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.395-398
• /
• 2002

Many research group started study to develope x-ray detector using thin film transistor from 1970. But realization of TFT based x-ray detector development was caused by progress of thin film transistor liquid crystal display(TFTLCD) device technology in 1990. The main current of TFT technology is display device. Research results expend TFT technology field from display device to sensor manufacture technology. These days many research group in the world realize various digital x-ray detector. In this study, We compare discharge erasing method to visible light erasing method in a-Se based digital x-ray detector. Visible light erasing method is known reset process in direct conversion x-ray detector. Digital x-ray detector using visible light erasing method is not adaptive for conventional x-ray device, because of its thickness. And it is not avaliable for real-time imaging for digital fluoroscopy, because of its long reset time. In this study we overcome these limitations and show new idea for real-time imaging method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.26-29
• /
• 2002

The ramp waveform has recently been introduced to erase wall charges of the previously selected cells for plasma display. However. the ramp waveform can't completely remove wall charges. In this paper. we suggested new erase waveform having a complex with close width pulse and ramp pulse for complete erasing. The erasing margin of suggested waveform is wider than the conventional waveform. Moreover. suggested wave form can reduce the erasing time compared.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.21-27
• /
• 1999

In this work, single-poly EEPROM was designed and fabricated by using standard $0.8{\mu}m$ CMOS process. From the results of programming and erasing characteristics, it was found that the programming time was smaller than 10ms and the erasing time was about 100ms. To reduce the erasing time, several erasing methods were performed. The S/D erasing method was used to improve the endurance characteristics which was degraded due to electron trapping in programming and erasing cycles. By using the S/D erasing method, the more improved endurance characteristics then conventional one was obtained.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.3
• /
• pp.141-144
• /
• 2006

In the present work, we investigated the holographic grating erasing method by means of the optical method. It was formed the grating under the interference of holographic recording He-Ne laser beams on chalcogenide $As_{40}Ge_{10}Se_{15}S_{35}$ thin film with various film thickness and erased the holographic grating by non-polarized He-Ne laser beam. As the results, the recording grating erased the 80 % of formed grating by non-polarized He-Ne laser beam. It was confirmed that the erasing characteristics by non-polarized laser beam need to improve the focusing of beam and the control of beam intensity. And then it can be expected as the application possibility of rewritable holographic memory technology.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.139-146
• /
• 2004

Resent removal work for road signs has been labor intensive and required times since it has been done manually using shaving type equipment. While traditional process is conducting, there are traffic jams caused by the passing control, and happened unexpected accidents to workers working at dangerous road circumstance. Besides, in current shaving method, there are high potentialities on the air pollution as well as the explosive accident occurred by using a propane gas. So, as an alternative, we have studied to develop the automatic erasing equipment made up with a high pressure water-jet system and automatic control system, mobile system; Wate-rjet system consists of an intensifier and nozzles to give a high pressure and spray on the sign, and automatic control system is composed of one axis robot using a hydraulic servo actuator controlled by a lever, And as a mobile system, a truck plays an important role for the transport of equipment and the forward movement in a removal process. In this paper, we have analyzed the characteristics of road signs and have investigated current erasing methods in the field. And we have organized and designed automatic erasing equipment, and we have made a basic experiment to find out the optimal spray condition as like the spray distance, spray angle and injection pressure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.505-508
• /
• 2001

Currently there is much interested in removing latent charge that is caused to latent image effect and blurring of obtained image as well as reduction of x-ray conversion efficiency in digital radiography system. To remove latent charge a-Se film is irradiated by light with 3500 lux using halogen lamp and optical fiber. We measured dark current and photosensitivity to analyze removing effect of latent charge, then compared with and without light erasing method. The reduction of measured signal due to latent charge effect was 32.5 %, and the removal effect of latent charge by using light erase method was its 95.5 %.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.505-508
• /
• 2001

Currently there is much interested in removing latent charge that is caused to latent image effect and blurring of obtained image as well as reduction of x-ray conversion efficiency in digital radiography system. To remove latent charge a-Se film is irradiated by light with 3500 lux using halogen lamp and optical fiber. We measured dark current and photosensitivity to analyze removing effect of latent charge, then compared with and without light erasing method. The reduction of measured signal due to latent charge effect was 32.3%, and the removal effect of latent charge by using light erase method was its 95.5%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.168-172
• /
• 2014

A new sustain driving method is proposed to improve luminous efficiency by the generation of the self-erasing discharge during a sustain period in AC plasma display panel. As one subfield time in the conventional AC PDP is divided into the reset, address, and sustain period. Among them, as the square sustain waveform is alternately applied to the X and Y electrodes on the front plate during the sustain period, the plasma discharge for displaying the image is continuously produced. Meanwhile, in the conventional driving method, the address waveform applied to the A electrode on the rear plate is only driving during an address period and grounded during a sustain period. In this experiment, the negative pulse is applied to the A electrode at the latter part of the sustain pulse for improving the luminous efficiency producing the self-erasing discharge during the sustain period. The negative pulse on the A electrode can change from the space to the wall charge and induce the additional discharge by the accumulated wall charge when the voltages of three electrodes are grounded. As a result, the luminous efficiency will be measured with changes in the voltage level of the A electrode and the new driving method can be improved to the luminous efficiency about 32 % compared with the conventional driving method.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2023

In the fintech environment, Smart phones are mainly used for various service. User authentication technology is required to use safe services. Authentication is performed by transmitting authentication information to the server when the PIN or password is entered and touch the button completing authentication. But A post-attack is possible because the smudge which is the trace of using screen remains instead of recording attack with a camera or SSA(Shoulder Surfing Attack). To prevent smudge attacks, users must erase their fingerprints after authentication. In this study, we proposed a technique to determine whether to erase fingerprints. The proposed method performed erasing fingerprint which is the trace of touching after entering PIN and designed the security keypads that processes instead of entering completion button automatically when determined whether the fingerprint has been erased or not. This method suggests action that must erase the fingerprint when entering password. By this method, A user must erase the fingerprint to complete service request and can block smudge attack.