• 한국전자파학회논문지
• /
• 제13권4호
• /
• pp.401-406
• /
• 2002

마이크로스트립 다층 구조 회로가 MMIC 분야에서 다양하게 적용되고 있다. 이에 따라 서로 다른 높이를 갖는 유전체 층 사이의 효율적인 마이크로스트립 선로 전송을 위해 3차원 계단형 불연속을 갖는 선로에서의 정확한 전달 특성 해석, 등가회로의 유도가 요구된다. 본 연구에서는 FDTD 수치해석 방법과 측정을 통해 얻어진 불연속면의 5 파라미터를 이용하여 T 형 등가회로와 소자 값들을 유도하였으며, 해석 및 측정 결과는 1~5 ㎓ 범위에서 잘 일치함을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1434-1435
• /
• 2008

In this paper, we propose a method that applies Vector Fitting(VF) and Adaptive Frequency Sampling(ASF) technique to the equivalent circuit model for RF passive components. VF and ASF schemes are implemented to obtain the rational functions. S parameters of the equivalent circuit model is compared to those of EM simulation in case of the microstrip structure with coupled bandpass filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.160-162
• /
• 2001

A determining method of the $\Gamma$ type eqivalent circuit parameters of induction motor driven by inverter source is proposed in this paper. The no-load test by rated frequency (60 Hz) and a blocked rotor test by 25% of rated frequency (l5Hz) are performed with inverter source, and the DC resistance of the stator winding is measured. To determine the more accurate parameters, four simultaneous equations obtained from equivalent circuit of the no-load test and blocked rotor test are solved by using initial values which are evaluated from simplified equivalent circuits. The induction motor performances are computed by using these parameters and compared with measured values of the tested motor. Then it is found that the compared results show good agreement between them.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.54-60
• /
• 2014

This paper shows a calculation method of several types of loss and the efficiency of brushless DC motors coupled with a load system by using a simple equivalent circuit, in which copper loss, eddy current loss, hysteresis loss, friction loss, viscous loss, and inverter loss are taken into account. We clarify each loss and motor efficiency at different motor speeds and different output torques by using the Microsoft-Excel. Moreover, the calculated results are in good agreement with the measured ones.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권11호
• /
• pp.597-603
• /
• 1999

Due to its simple construction, operation steadiness and low cost, claw pole step motor is widely used for OA machine and automobile. This paper deals with analysis fo claw pole motor, especially eyeing to dynamic characteristics. To analyze dynamic characteristics of claw pole step motor, torque development in each angular step of rotor are surveyed and torque equation is drived using permeance method. To adopt the airgap MMF, the magnetic equivalent circuit of the motor is introduced. On the base of the magnetic equivalent circuit, the air gap flux equation is derived. To get a optimum design of the motor, the torque characteristic is studied in variation of coil data and remanence value of permanent magnetic material.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1596-1603
• /
• 2018

This paper presents the new design and validation process of the linear transverse flux machine of the stelzer machine for hybrid vehicle application. A linear transverse flux machine is a novel electric machine that has higher force density and power than conventional electric machine. The process concentrates on 2-dimensional and 3-dimensional analysis using equivalent magnetic circuit method considering leakage elements and it is verified by finite element analysis. Besides the force characteristics of all axis of each direction are analyzed. The study is considered by dividing the transverse flux electric excited type and the transverse flux permanent magnet excited type. Additionally three-dimensional analysis in this machine is accomplished due to asymmetric structure with another three axes. Finally, it suggests the new design and validation process of linear transverse flux machine for stelzer machine.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1670-1676
• /
• 2014

This paper presents the modeling of Single Electron Transistor (SET) based on Physical model of a device and its equivalent circuit. The physical model is derived from Schrodinger equation. The wave function of the electrode is calculated using Hartree-Fock method and the quantum dot calculation is obtained from WKB approximation. The resulting wave functions are used to compute tunneling rates. From the tunneling rate the current is calculated. The equivalent circuit model discuss about the effect of capacitance on tunneling probability and free energy change. The parameters of equivalent circuit are extracted and optimized using genetic algorithm. The effect of tunneling probability, temperature variation effect on tunneling rate, coulomb blockade effect and current voltage characteristics are discussed.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.144-151
• /
• 2015

The present study proposes a method for modeling a SONAR transducer with dual resonance. The Butterworth van-Dyke (BVD) model, a conventional SONAR transducer modeling method, can model only one resonance point. Hence, to address its disadvantage and to model the dual resonance, a dual resonance BVD model consisting of two serial BVD models is proposed. The two BVD models are connected in a series, and each simulate resonance at low frequency and high frequency, which allows the modeling of two resonance points. Eight elements compose the equivalent circuit by connecting the BVD models in a series, which is twice as great as that of the existing BVD model. The element value of the dual resonance BVD model is extracted by using the particle swarm optimization method. Analysis was also performed to identify the effects of changes in the value of elements that compose the equivalent circuit on the impedance characteristics of the equivalent circuit through simulation in which element values varied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.130-133
• /
• 2004

The characterization of interdigitated capacitors was investigated. The test structures are manufactured by low temperature co-fired ceramic(LTCC) process and their s-parameters were measured. The optimized equivalent circuit models for test structures were obtained using the partial element equivalent circuit(PEEC) method. Predictive modeling was performed on different test structures using optimized parameters to verify the circuit models. From this result, the manufacturability on the process can be improved through the predictive modeling for the characteristics of interdigitated capacitors.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권1호
• /
• pp.61-73
• /
• 1985

The induction motor is widely used in the power equipments of the ship and the various industrial drive applications because it is robust and relatively simple and cheap to manufacture, but it has a disadvantage that the speed of induction motor is not controlled in wide range such as d.c motor. In this paper, the characteristics relating to the Kramer system that the speed of three phase wound type induction motor is controlled by changing the exciting e.m.f. of the secondary circuit is described. In order to analyze the characteristics, a new simplified and approximated T-type equivalent circuit from the Kramer circuit with three phase graetz connection and d.c machine is proposed. The stator current, motor torque and mechanical output power are computed by the current, torque and power equations derived by its equivalent circuit. Through the experiments, the $I_f-N$, torque-slip and current-slip characteristic curves of the tested motor are obtained and the various needed constants are determined. The numerical values obtained from the above method are compared with experimental values under the same conditions. As a result of the above investigation, it is found that the induction motor speed by the Kramer system is controlled by 28 per cent under the rated speed by changing the field current of d.c motor and the values computed by the current and torque equations derived by the simplified and approximated T-type equivalent circuit generally come to approach the experimental values.