• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.500-505
• /
• 2000

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics of attenuation and propagation of Sand Drain Method in construction field. On the basis of measurement value, we analysed about prediction possibility of Sand Drain Method. This study also present a basic data found a effective plans for Sand Drain Method.

• International journal of advanced smart convergence
• /
• 제6권2호
• /
• pp.16-23
• /
• 2017

In contemporary modern society, people are constantly exposed to many kinds of noise, such as that from machinery, aircraft, construction sites, or road traffic. Noise is considered one of the most indispensable and influential parts of human life. This study investigates the acoustic characteristics of noise transfer from external sources to the human ear. For this study, we measured and analyzed various types of noise environments, installed monitoring speakers in a semi-anechoic room, and conducted intentional noise-filled experiments. In this environment, the size of the sounds generated by use of a portable device was also measured and the SNR (signal to noise ratio) calculated to study the influence of the noise. As sound is transmitted to the ear and the human body, it affects not only auditory damage but also other parts of the body. In this paper, we propose a proper SNR for noise emitted by portable IT equipment to prevent hearing loss when IT equipment is used.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.336-347
• /
• 2011

Objectives: In Korea, an average of 258 workers claim compensation for their noise-induced hearing loss (NIHL) on an annual basis. Indeed, hearing disorder ranks first in the number of diagnoses made by occupational medical check-ups. Against this backdrop, this study analyzed the impact of 19 types of noise-generating machines and equipment on the sound pressure levels in workplaces and NIHL occurrence based on a 2009 national survey on work environments. Methods: Through this analysis, a series of statistical models were built to determine posterior probabilities for each worksite with an aim to present risk ratings for noise levels at work. Results: It was found that air compressors and grinding machines came in first and second, respectively in the number of installed noise-generating machines and equipment. However, there was no direct relationship between workplace noise and NIHL among workers since noise-control equipment and protective gear had been in place. By building a logistic regression model and neural network, statistical models were set to identify the influence of the noise-generating machines and equipment on workplace noise levels and NIHL occurrence. Conclusion: This study offered NIHL prevention measures which are fit for the worksites in each risk grade.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.632-637
• /
• 2012

Antenna equipment is transported being assembled to moving equipment and often subjected to vibration and shock excitation during transportation. In these circumstances, structural safety of antenna equipment must be secured. Wire rope isolators are assembled between moving equipment and antenna equipment to reduce the level of vibration and shock. In this paper, a isolator that are suitable to the system is selected and dynamic characteristics analysis of driving on antenna equipment is conducted using real system and the result is compared with response analysis. Also modal test of array-antenna pack-assembly is conducted and structural safety of that is secured by reinforcing its structure.

• 한국음향학회지
• /
• 제40권6호
• /
• pp.607-614
• /
• 2021

승강기 소음에 대한 연구는 주로 발생 원인 및 저감 방안에 대한 것이 많았다. 승강기 소음을 정확하게 측정하고 평가하는 방법에 대해서는 아직 연구가 미비하다. 측정방법에 대해서는 국제표준으로 제정하여 측정 방법이 있지만 그것 또한 고층아파트에 적용하기 힘들고, 승강기 소음의 특성을 면밀히 반영하지 않은 것이 많다. 이러한 문제를 해결하고자 현행 규격에서 승강기 소음 측정 방법을 개선하는 연구가 이루어 졌다. 본 연구에서는 승강기 소음의 특성을 면밀히 파악하고자 하였다. 승강기 소음과 다른 설비기기와의 주파수 분석을 통해 승강기 소음이 다른 설비기기와는 다른 특성의 소음임을 검증 하였다. 승강기 소음은 구조전달소음으로 대표적인 구조전달소음인 중량바닥충격음과 비교 분석을 하였다. 승강기 소음과 중량바닥충격음과의 상관성은 0.9 수준으로 매우 높게 나타났다. 이 결과로 승강기 소음은 중 저주파대역이 주요한 구조전달소음이며 다른 설비기기와 함께 평가될 수 없음을 검증 하였다.

• 한국소음진동공학회논문집
• /
• 제25권1호
• /
• pp.58-64
• /
• 2015

There are a lot of different types of noise from construction site and it depends on construction stage, equipment type and number of operating equipments. The problem is that the almost noise from construction site is high level and some kinds of noise levels are over 100 dB. In addition, if construction site is located in downtown, there are a few options to reduce noise level. Therefore several site mitigation plans were developed to reduce different types of construction noises such as breaker work, gang form and asphalt saw. They were applied in site and evaluated noise reduction performance. The test result of site insertion loss was between 4~8 dB depends on the equipment and type of work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.240-242
• /
• 2005

It is well known that the PD (Partial Discharge) signals are generated if insulators have some defects such as voids in electrical facility and various PD detection methods are developed for preventing electrical troubles. So, an interest for the PD signals is higher and higher according to the high concern for the defects detection method of the aging electrical facility. When the equipment to detect PD signals installed at site and it works, a lot of noises flow in the equipment from surrounding situation and it will be mixed with original PD waveform. So we can not get the desired PD waveform. Therefore, there are many trial to reject or suppress the noise from the PD signals from long times ago. The greater of them used the hardware such as bridge circuits and frequency filters to suppress the noise. This paper proposed a novel noise rejection method in acquired data from PD detection equipment. The noise has the irregular phase and higher signal level than real PD, and noise decision is performed after inspection of pulse distribution in ${\Phi}$-q-n graph of acquired data from PD detection equipments. By experimental results on high voltage electric equipments, it is shown that proposed method has good performance. It is expected that this noise rejection technology is useful in numeric calculation and trend management of PD level.

• 설비공학논문집
• /
• 제19권4호
• /
• pp.346-354
• /
• 2007

Recently, in accordance with the buildings are rapidly becoming to high-stories, large-sizes, and since the case that noise of equipment machinery, tool itself infringes the life environment is on increasing, this is becoming to the object of civil appeal. Accordingly, in order to set up a countermeasure against such equipment machinery noise, even a systemic evaluating method is required, up to now while the appraisal that considering on the physical characteristic only had been done, but the characteristic about subjective valuation was not reflected as yet. Therefore, in this research, through the 1st, 2nd Psycho-Acoustics Experiments, the 30 vocabularies were extracted for evaluation of the construction equipment noise. As the result of Element Analysis, the 3 Elements were extracted from these vocabularies, and it could be understood that these Elements have been trustfully selected. It is now considering that the extracted vocabularies as per the above result would be used to Psycho-Acoustic Evaluation on Equipment Noise, and Psycho-Acoustics Experiment.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.393-400
• /
• 2012

This paper deals with a development of 2-DOF flutter experiment equipment which represents a 2-DOF typical section model. For a conventional 2-DOF flutter experiment equipment, it is hard to observe flutter boundary clearly due to the complexity of the experiment equipment. To refine our flutter experiment equipment system, a compliant mechanism based torsional spring is used. Well-designed extruded aluminum pipe works as a torsional spring. SolidWorks and ANSYS are used for modeling, analysis and design of the torsional spring. With this designed torsional spring, the 2-DOF flutter experiment equipment is developed and wind tunnel tests are performed. Clear flutter boundary which is estimated by classical flutter analysis is observed in the experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.429-434
• /
• 2012

This paper deals with a development of 2-DOF flutter experiment equipment which represents a 2-DOF typical section model. For a conventional 2-DOF flutter experiment equipment, it is hard to observe flutter boundary clearly due to the complexity of the experiment equipment. To refine our flutter experiment equipment system, a compliant mechanism based torsional spring is used. Well-designed extruded aluminum pipe works as a torsional spring. SolidWorks and ANSYS are used for modeling, analysis and design of the torsional spring. With this designed torsional spring, the 2-DOF flutter experiment equipment is developed and wind tunnel tests are performed. Clear flutter boundary which is estimated by classical flutter analysis is observed in the experiments.