• 성인간호학회지
• /
• 제15권2호
• /
• pp.305-315
• /
• 2003

Purpose: To describe the status of the laboratory facilities, equipment and expenses for practice in a four-year nursing schools and to analyze mandatory requirements for laboratory facilities and equipment. Method: A descriptive survey research design was used. The participants were 49 of the 4-year nursing schools across the nation. The data were collected by e-mail. The return rate for questionnaires was 63.3% (n=31). Result: In 2001 the total expenses for laboratory practice were 21,865,230 won and the average per student was 102,418 won. Types of laboratories included single and complex. The mean size for laboratories was $318.7m^2$ and mean size for laboratories for fundamental nursing was $161.1m^2$. The range for number of students in a laboratory class was 20-30 for eight universities (30.8%). Among required laboratory equipment, items that were deficient in 50% in the universities were mercury and aneroid sphygmomanometers for children, electronic sphygmomanometers, Bell type fetal stethoscopes, sheepskin, beds for children, for gynecology, and electronic hilo beds. Among the elective equipment, items that were deficient in 50% of the universities were $O^2$ tents, Blackmore tubes, retractors, hot-water supply, and incentive spirometers. The number of items that needed to add to the equipment were 10 for required equipment and 22 for elective equipment. Conclusion: A standardized mandatory list of equipment for laboratory facilities and expenses for practice in 4-year nursing schools needs to be developed.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.37-42
• /
• 2008

As use of construction equipment has been increasing continuingly, the proportion of equipment expense to the total construction cost has become higher. However, there is a difference between the equipment expenses section in 'Poom-Sam' and practical data, because 'Poom-sam' does not consider non-working days due to weather conditions, legal holidays and management conditions. Therefore, 'Poom-Sam' does not present a reasonable standard for estimating construction equipment expenses. In this study, to estimate realistic construction equipment operating hours, firstly, construction equipment was classified according to work, and weather conditions, in which each work could not be executed, were established. Then, weather data on Seoul and Busan($2004{\sim}2006$) and legal holidays were analyzed to suggest annual standard operating hours. The annual standard operating hours of earthmoving & excavating, compaction, and drilling equipment was estimated to be 1,430 hours, and lifting equipment, concrete paving equipment, asphalt paving equipment, concrete equipment, and crushing & conveying equipment were estimated to be 2,124 hours, 1,156hours, 1,188hours, 1,688hours, and 2,152hours respectively.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.503-508
• /
• 2007

건설공사 표준품셈 기계경비 부분은 1960년대 초 일본 및 미국의 자료를 근간으로 하여 제정된 이후, 극히 부분적으로만 제 ${\cdot}$ 개정되었을 뿐 그 동안의 건설기계와 공법의 발전을 반영하지 못하고 있다. 본 연구에서는 표준품셈 기계경비 중에서 기계손료의 관리비(금리, 격납보관비, 보험료, 세금)를 조사하였으며 합리적인 관리비 산출을 위해 국내 ${\cdot}$ 외 문헌조사, 건설현장 16개소 실사, 그리고 건설기계장비 임대업체 20개사를 대상으로 설문조사 및 인터뷰를 실시하였다. 수집한 자료와 현행 표준품셈의 관리비 산출에 적용되는 수치들을 비교분석한 결과를 토대로 관리비를 새롭게 정의하였다. 관리비의 구성 면에서 금리, 격납보관비, 보험료와 세금 등을 고려하여 6종건설기계와 일반기계를 구분하였고 현실적인 수치를 제시하였다. 본 논문에서 제시하고 있는 각종 자료 및 수치들은 적정한 공사 예정가격을 산정할 수 있는 기초가 될 수 있을 뿐 아니라, 관련 연구의 토대가 될 수 있으리라 기대한다.

• 한국건설관리학회논문집
• /
• 제9권1호
• /
• pp.155-166
• /
• 2008

건설공사 표준품셈 기계경비 부분은 1960년대 초 일본 및 미국의 자료를 근간으로 하여 제정된 이후, 극히 부분적으로만 제 개정되었을 뿐 그 동안의 건설기계와 공법의 발전을 반영하지 못하고 있다. 본 연구에서는 합리적인 기계경비 산출을 위해 불도우저와 로우더를 중심으로 국내 외 문헌조사, 건설현장 16개소 실사, 그리고 건설기계장비 임대업체 20개사를 대상으로 설문조사 및 인터뷰를 실시하였다. 수집한 자료와 현행 표준품셈의 기계경비 산출에 적용되는 수치들을 비교 분석한 결과, 관리비는 금리와 보험료를 고려하여 6종건설기계와 일반기계를 구분하여 현실적인 수치를 제시하였으며; 운전경비는 조수를 삭제하는 것이 현실적인 것으로 나타났다. 또한 주연료 및 잡재료는 현행수준이 적정하지만 장비가격은 상향조정할 필요가 있는 것으로 분석되었다. 논문에서 제시하고 있는 각종 자료 및 수치들은 건설기계와 기술의 급속한 발전을 예정가격산정의 기준에 적용할 수 있는 기초가 될 수 있을 뿐 아니라, 관련 연구의 토대가 될 수 있으리라 기대한다.

• 대한토목학회논문집
• /
• 제32권5D호
• /
• pp.453-461
• /
• 2012

장비나 설비의 경제성 분석을 위해 실시되는 수명분석의 목적은 현 자산의 미래 폐기 지표를 예측하여, 예측자료에 의거한 여러 경영전략을 수립하여 활용하는 데 있다. 본 연구에서는 1) 생존곡선을 사용하여 건설장비의 평균수명, 기대수명, 예측수명을 구하는 방법과 생존곡선에 의한 수명결정방법을 분석하여 제시하였고 2) 수익과 비용에 의한 수명결정 모델을 제안하고 이를 검증해 보았다. 연구 결과, 동일한 장비라고 하더라도 비용, 수익, 초기투자비에 따라 경제수명이 다르게 나타날 수 있음을 알게 되었다. 본 연구에서 제안한 건설장비 수명결정 모델은, 장비의 개별적 경영상황을 반영할 수 있는 수명 결정 모델로서, 회사경영합리화를 위해 활용될 수 있을 것이다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.219-224
• /
• 2007

최근 건설공사의 대형화와 복합화로 인해 건설기계의 사용은 지속적으로 증가하고 있으며 전체공사비 중 기계경비가 차지하는 비율 또한 점차 높아지고 있다. 하지만 현행 '건설공사 표준품셈'은 기상조건으로 인한 작업불가능일, 법정공휴일, 공사관리조건에 따른 작업중지일 등을 고려하지 않고 있어 실제 운전시간과는 많은 차이를 보이고 있는 실정이며, 따라서 현실적이고 합리적인 건설기계경비 산출기준을 제시해주지 못하고 있다. 본 연구에서는 견설기계의 현실적인 연간표준가동시간을 산정하기 위하여 우선 표준품셈 상의 건설기계를 각 공종별로 분류하고, 각 공종의 작업이 불가능한 기상조건을 설정하였다. 한편 2004${\sim}$2006년의 서울과 부산의 일일 기상자료를 분석하여 기상조건 및 법정공휴일에 의해서 연간 각 작업이 불가능한 일수를 산출하고, 중복일수를 공제하여 각 장비의 연간표준가동시간을 산정하였다. 그 결과 연간표준가동시간은 토공장비, 다짐장비, 기초공사장비는 1,430시간, 운반 및 하역기계(양중장비로 한정)는 2,124시간, 콘크리트 포장기계는 1,156시간, 아스팔트 포장기계는 1,188시간, 콘크리트기계는 1,688시간, 골재생산장비는 2,152시간으로 산정되었다.

• 대한안전경영과학회지
• /
• 제25권2호
• /
• pp.113-120
• /
• 2023

Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.

• 수산해양교육연구
• /
• 제6권1호
• /
• pp.1-10
• /
• 1994

This study attempted to investigate the demands of fishing village people and the actual status of their living, to diagnose the problems in fishing villages and to present some basic data for fishing village development. The major findings of this study were as follows ; 1) The problems in fishing village of Korea included fishing village, household debt, big fluctuation of fish prices, children's education, cultural and welfare facilities need to investment for equipment, marriage and health. 2) The respondents said that fishing village household debt was mainly caused by lack of income from fishery(37%), educational expenses(28.5%), excessive fishery expenses(20%), excessive fishery equipment(15%), and government policy(12%). 3) The outlook of fishery development is considered bright by the respondents. They said that fishery would be a prospective industry if the appropriate conditions are given. Considerable research efforts for government policies will be needed to develop the fishery industry.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.302-303
• /
• 2018

This study analyzed the major revision factors and revision contents for 'Construction-Standard-Production-Rate for Construction Works in 2018. Part 16. Pipe Laying Down and Connection" which was revised by the construction expense estimation standard's middle and long-term plans. The main reasons for the revision was analyzed to be unclear construction scope, limitations in applicable pipe material based on the facility type, labor force mainly composed of ordinary workers, limitations of labor force, and incomplete appropriation standard for the tool rent fee and equipment expenses. Through revision of factors, common items were newly established, organization was revised, the labor force was mainly composed of the technicians, and basis for appropriation of equipment expenses was arranged. In addition, through periodic revision, the appropriation standard for bend and special pipes was set. Consequently, more practical construction cost estimate standard is arranged through revision.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.98-99
• /
• 2014

Construction equipment cost is critical to estimate the total construction costs, particularly in large and complicated projects. Despite its importance, the construction equipment cost may not reflect the current market value since the equipment database is being updated every 6 years at most. To keep construction equipment cost up to date, it is highly recommended to use the standard market price that is reported each year by the Ministry of Security and Public Administration (MOSPA). However, there is still a gap to adopt the standard market price system for the construction equipment cost computing system. Therefore, this paper suggests an effective way to develop a construction equipment cost estimation system.