• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.2
• /
• pp.57-66
• /
• 2002

This review focuses on the use of immobilized lipase technology for the hydrolysis of oils. The importance of lipase catalyzed fat splitting process, the various immobilization procedures, kinetics, deactivation kinetics, New immobilized lipases for chiral resolution, reactor configurations, and process considerations are all reviewed and discussed.

• BMB Reports
• /
• v.31 no.3
• /
• pp.233-239
• /
• 1998

A GABA synthesizing enzyme, glutamate decarboxylase, has been purified from bovine brain by several chromatographic procedures. The preparation appeared homogeneous on SDS-PAGE. The enzyme is a homodimeric protein with a molecular mass of 120 kDa. The activation of glutamate decarboxylase by ginesenosides from Panax ginseng C.A. Meyer has been studied. Preincubation of the enzyme with total ginsenoside, $Rb_2$ and Rc ginsenosides, increased glutamate decarboxylase activities in a dose-dependent manner. There was a reproducible decrease in $K_m$, in addition to a increase in $V_{max}$, in response to increasing concentrations of the Rc ginsenoside fraction. Upon addition of the ginsenoside to the enzyme, a decrease in flurorescence intensity was discernible, together with an increase in emission anisotropy. Judging from the anisotropy values, the ginsenoside is rapidly trapped by the protein matrix. Total ginsenoside was administered to rats and the rat brains were removed for the measurement of the changes of GABA shunt regulating enzyme activities. Among the GABA shunt regulating enzymes, only the glutamate decarboxylase activities were increased after ginsenoside treatment. Therefore, it is suggested that the ginsenosides may elevate the GABA level in brain by activation of glutamate decarboxylase and the enzymatic activation might be due to the conformational change induced by binding of ginsenoside to the enzyme.

• BMB Reports
• /
• v.39 no.1
• /
• pp.105-110
• /
• 2006

We have screened 766 strains of fungi from the BIOTEC Culture Collection (BCC) for xylanases working in extreme pH and/or high temperature conditions, the so-called extreme xylanases. From a total number of 32 strains producing extreme xylanases, the strain BCC7928, identified by using the internal transcribed spacer (ITS) sequence of rRNA to be a Marasmius sp., was chosen for further characterization because of its high xylanolytic activity at temperature as high as $90^{\circ}C$. The crude enzyme possessed high thermostability and pH stability. Purification of this xylanase was carried out using an anion exchanger followed by hydrophobic interaction chromatography, yielding the enzyme with >90% homogeneity. The molecular mass of the enzyme was approximately 40 kDa. The purified enzyme retained broad working pH range of 4-8 and optimal temperature of $90^{\circ}C$. When using xylan from birchwood as substrate, it exhibits $K_m$ and $V_{max}$ values of $2.6{\pm}0.6\;mg/ml$ and $428{\pm}26\;U/mg$, respectively. The enzyme rapidly hydrolysed xylans from birchwood, beechwood, and exhibited lower activity on xylan from wheatbran, or celluloses from carboxymethylcellulose and Avicel. The purified enzyme was highly stable at temperature ranges from 50 to $70^{\circ}C$. It retained 84% of its maximal activity after incubation in standard buffer containing 1% xylan substrate at $70^{\circ}C$ for 3 h. This thermostable xylanase should therefore be useful for several industrial applications, such as agricultural, food and biofuel.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.8
• /
• pp.1084-1091
• /
• 2013

In this paper, two statistical methods were applied to optimize medium components to improve the production of the milk-clotting enzyme by Bacillus amyloliquefaciens D4. First, wheat bran juice, skim milk powder, and $Na_2HPO_4$ were shown to have significant effects on D4 enzyme production using the Plackett-Burman experimental design. Subsequently, an optimal medium was obtained using the Box-Behnken method, which consisted of 3.31 g/l of skim milk powder, 5.0 g/l of sucrose, 0.1 g/l of $FeSO_4{\cdot}7H_2O$, 0.1 g/l of $MgSO_4{\cdot}7H_2O$, 0.1 g/l of $MnSO_4{\cdot}2H_2O$, 0.1 g/l of $ZnSO_4{\cdot}7H_2O$, 1.52 g/l of $Na_2HPO_4$, and 172.45 g/l of wheat bran juice. With this optimal medium, the milk-clotting enzyme production was remarkably enhanced. The milk-clotting enzyme activity reached 3,326.7 SU/ml after incubation of 48 h, which was 1.76-fold higher than that of the basic medium, showing that the Plackett-Burman design and Box-Behnken response surface method are effective to optimize medium components, and B. amyloliquefaciens D4 possessed a high rennet-producing capacity in the optimal medium.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.299-301
• /
• 2004

A simple procedure for the extraction of the lipolytic enzyme from rice bran has been developed. High activity of lipolytic enzyme was obtained by first defatting the rice bran to remove lipid components with various extraction conditions. Then, after five cycles of aqueous extraction, rice bran lipolytic enzyme was purified using micro- and ultrafiltration apparatus. Lipolytic enzyme activity was estimated by its hydrolytic action of tributyrin. The result indicated that the standard activity curve of butyric acid showed that the potential rice bran enzyme is a hydrolytic lipase enzyme. In addition, it showed higher lipolytic activity and specific enzyme activity with further purification by micro- and ultrafiltration.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1342-1350
• /
• 2009

This paper investigates the production and optimization of $\beta$-galactosidase enzyme using synthetic medium by Kluyveromyces lactis NRRL Y-8279 in stirred tank bioreactor. Response surface methodology was used to investigate the effects of fermentation parameters on $\beta$-galactosidase enzyme production. Maximum specific enzyme activity of 4,622.7 U/g was obtained at the optimum levels of process variables (aeration rate 2.21 vvm, agitation speed 173.4 rpm, initial sugar concentration 33.8 g/L, incubation time 24.0 hr). The optimum temperature and pH of the $\beta$-galactosidase enzyme produced under optimized conditions were $37^{\circ}C$ and pH 7.0, respectively. The enzyme was stable over a pH range of 6.0-7.5 and a temperature range of $25-37^{\circ}C$. The $K_m$ and $V_{max}$ values for O-nitrophenol-$\beta$-D-galactopyranoside (ONPG) were 1.20 mM and $1,000\;{\mu}mol/min{\cdot}mg$ protein, respectively. The response surface methodology was found to be useful in optimizing and determining the interactions among process variables in $\beta$-galactosidase enzyme production. Hence, this study fulfills the lack of using mathematical and statistical techniques in optimizing the $\beta$-galactosidase enzyme production in stirred tank bioreactor.

• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.21-28
• /
• 2019

Use of cement in stabilizing the sulfate-bearing clay soils forms ettringite/ thaumasite in the presence of moisture leads to excessive swelling and causes damages to structures built on them. The development and use of non-traditional stabilisers such as alkali activated ground granulated blast-furnace slag (AGGBS) and enzyme for soil stabilisation is recommended because of its lower cost and the non detrimental effects on the environment. The objective of the study is to investigate the effectiveness of AGGBS and enzyme on improving the volume change properties of sulfate bearing soil as compared to ordinary Portland cement (OPC). The soil for present study has been collected from Tilda, Chhattisgarh, India and 5000 ppm of sodium sulfate has been added. Various dosages of the selected stabilizers have been used and the effect on plasticity index, differential swell index and swelling pressure has been evaluated. XRD, SEM and EDX were also done on the untreated and treated soil for identifying the mineralogical and microstructural changes. The tests results show that the AGGBS and enzyme treated soil reduces swelling and plasticity characteristics whereas OPC treated soil shows an increase in swelling behaviour. It is observed that the swell pressure of the OPC-treated sulfate bearing soil became 1.5 times higher than that of the OPC treated non-sulfate soil.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.209-214
• /
• 1978

Naringinase produced from Aspergillus nidulans was immobilized in acrylamide gel by the entrapping method and its characteristics were studied. Optimum acrylamide concentration was 10%, but N.N'-methylene bisacrylamide concentration had no influence on the final enzyme gel activity. The suitable amount of enzyme dissolved in the polymerization reaction mixture was 126 units/ml. Optimum pH of immobilized enzyme was 5.0 which was the same as that of free enzyme. However, immobilized enzyme showed a higher optumum reaction temperature, markedly increased pH and temperature stability. In a packed-column reactor, the observed reaction rate was increased proportionally to flow rate up to 5ml/min., but independent above 6ml/min.. Activation energy of the immobilized enzyme was 13.01 Kcal/mole, and the energy required for the thermal inactivation was 39.4 Kcal/mole. The apparent Km for 100 mesh gel was $7.23{\times}10^{-3}$ mole.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.352-359
• /
• 2020

Inorganic nanoparticles have been actively applied to the bio-medical field by utilizing their physical properties derived from the nanometer size regime, such as optical and magnetic properties. In recent years, diagnostic detection methods have been developed by employing chemical activity, particularly enzyme-mimetic activities, as well as physical properties of inorganic nanoparticles. After the initial study of verifying the enzyme-mimetic activities, the scope of research has been expanded to the direct use of therapeutic effects with active control of activity through understanding of the catalytic mechanism. This review summarizes recent research works on the active control of the enzyme-mimetic activities and newly demonstrated applications on the diagnosis and treatment of diseases, focusing on inorganic nanoparticles, so-called "nanozyme". It is expected that the enzyme-mimetic activity of inorganic nanoparticles will be combined with their inherent physical properties, leading to the development of new diagnostic and therapeutic methods.

• Archives of Pharmacal Research
• /
• v.19 no.6
• /
• pp.480-485
• /
• 1996

Brain GABA transaminase is inactivated by preincubation with antidepressant/antipanic drug pheneizine (${\beta}$ethylphenylhydrazine) (mixing molar ratio 10:1) at pH 7.4. The reaction of enzyme with phenelzine was monitored by absorption and fluorescence spectroscopic methods. The inactive enzyme was fully reconstituted by addition of cofactor pyridoxal-5-phosphate. This result implies that the blocking of 1 mol of pyridoxal-5-phosphate per enzyme dimer is needed for inactivation of the enzyme. The time course of the reaction is significantly affected by the substrate .alpha.-ketoglutarate, which afforded complete protection against the loss of catalytic activity. The kinetic studies shows that phenelzine reacts with the cofactor of enzyme with a second-order rate constant of $2.1{\times}10^3M^{-1}s^{-1}$. It is postulated that the antidepressant/antipanic drug phenelzine is able to elevate the neurotransmitter GABA levels in central nervous system by inhibitory action on GABA degradative enzyme GABA transaminase.