• 제목/요약/키워드: Environmentally friendly GIS

검색결과 10건 처리시간 0.028초

친환경 GIS Spacer용, 이종 무기물 절연소재의 혼합비 최적화를 위한 부분방전 저항성 특성 연구 (A Study on the Partial Discharge Resistance Characteristic for Optimizing the Mixing Ratio of Heterogeneous Inorganic Insulated Materials for Environmentally Friendly GIS Spacer)

  • 박재준
    • 전기학회논문지
    • /
    • 제67권9호
    • /
    • pp.1189-1196
    • /
    • 2018
  • 7 type composites (40, 45, 50, 55, 60, 65, and 70 wt.%)were prepared for the environmentally friendly GIS Spacer. Five kinds of samples were prepared for optimization of the filler content ratio (MS: MA = 1: 9, 3: 7, 5: 5, 7: 3, 9: 1) of epoxy / microsilica and microalumina. As a result of evaluation of the partial discharge resistance characteristic, surface erosion is generally slowed down as the fill amount of micro silica is increased. Also, partial discharge resistance characteristics for the development of insulating materials with optimal mixing ratios of heterologous showed a higher partial resistance of discharge and a decrease in erosion, as the filler content ratio of micro silica was larger. In the future, various researches such as electrical, mechanical, and thermal studies will be needed to develop insulating materials that can commercialize power devices in environmentally friendly insulating gas.

고점도형 고상에폭시/실리카와 알루미나 콤포지트의 전기적, 기계적 특성연구 (Study on Electrical and Mechanical Properties of High Viscosity Solid Epoxy / Silica and Alumina Composite)

  • 박재준
    • 전기학회논문지
    • /
    • 제67권10호
    • /
    • pp.1330-1337
    • /
    • 2018
  • In this study, 40, 50, 60, and 70 wt% filler dispersed samples were prepared for the current GIS Spacer or environmentally friendly GIS. In the AC electrical breakdown, EMSC and EMAC decreased with increasing filler content, and EMSC showed better breakdown strength than EMAC. The mechanical properties such as tensile strength and flexural strength of EMSC and EMAC were also increased with increasing filler content. In addition, EMSC results in better mechanical properties than EMAC. The reason for this is considered to be one in which the influence of the interface is important.

친환경 GIS Spacer용, 에폭시-나노-마이크로실리카 혼합 콤포지트의 교류 전기적, 기계적 특성 (AC Electrical and Mechanical Properties of Epoxy-Nano-Microsilica Mixed Composites for Eco-Friendly GIS Spacer)

  • 박재준
    • 전기학회논문지
    • /
    • 제67권9호
    • /
    • pp.1181-1188
    • /
    • 2018
  • In order to develop new insulating materials for GIS Spacer using environmentally friendly insulating gas, three kinds of dispersed liquid nano composites of solid epoxy /nano layered silicate filled material were prepared. And the epoxy/nano/micro silica composite was prepared by mixing epoxy/nano 3 phr dispersion/4 kinds of filler contents(40,50,60, 70wt%). The electrical insulation breakdown strengths of the nano and nano/micro mixed composites were evaluated by using 8 kinds of samples including the original epoxy. The mechanical tensile strength of the epoxy / nano / micro silica composite were evaluated, also. The TEM was measured to evaluate the internal structure of nano/micro composites. As a result, it was confirmed that the layered silicate nano particles was exfoliated through the process of inserting epoxy resin between silicate layers and the layers. In addition, dispersion of nano / micro silica resulted in improvement of electrical insulation breakdown strength with increase of filling amount of dense tissue with nanoparticles inserted between microparticles. In addition, the tensile strength showed a similar tendency, and as the content of microsilica filler increased, the mechanical improvement was further increased.

여러 종류의 에폭시/이종무기물 혼합 콤포지트의 전기적 교류 절연파괴 특성 (Electrical AC Insulation Breakdown Characteristics of Various Epoxy / Heterogeneous Inorganic Mixed Composite)

  • 박재준
    • 전기학회논문지
    • /
    • 제67권11호
    • /
    • pp.1463-1470
    • /
    • 2018
  • In this study, 20 types of samples were prepared by mixing different kinds of inorganic materials to develop insulation materials for epoxy - based GIS substation equipment used under high voltage environmentally friendly insulation gas. One of the electrical characteristics, AC insulation breakdown experiment was performed. As mixing ratio of mixed heterogeneous inorganic materials, the dielectric breakdown strength was increased with increasing filler ratio of micro silica, micro silica : micro Alumina, 1:9, 3:7, 5:5, 7:3, 9:1, and decreased as the filling amount of micro alumina increased. The AC insulation breakdown characteristics were the best when the composition ratio was 9:1. The higher the content of silica, the better the interfacial properties, and the larger the alumina content ratio, the worse the interfacial properties.

친환경절연재의 절연성 평가 (Assess of Breakdown Characteristics about Environmentally Friendly Gases)

  • 최은혁;구본호;김이국;이광식
    • 조명전기설비학회논문지
    • /
    • 제23권5호
    • /
    • pp.96-100
    • /
    • 2009
  • 산업사회의 발달과 더불어 신뢰성 높은 양질의 전기에너지와 운전 및 보수의 간편화, 계통 운용의 신뢰성, 안전성 확보가 요구되고 있다. 따라서 본 논문은 각종 전력설비에서 $SF_6$을 대체할 수 있는 친환경절연제로 연구되고 있는 $N_2-O_2$ 혼합가스($N_2:O_2=100$ : 0, 79 : 21, 60 : 40, 40 : 60) 절연파괴특성을 구명(究明)하여 이를 $SF_6$가스의 특성과 비교하였다. 이상의 연구 결과, 제조공기와 Dry-Air 절연특성을 구명함으로서 각종 전력응용 설비의 절연설계에 $SF_6$ 대신 친환경적인 모의공기를 사용 가능함을 본 연구에서 구명(究明)하였다. 제조공기를 이용한 친환경적인 절연재 사용으로 지구의 온난화현상 감소에 크게 기여할 것으로 기대된다.

The Insulation Evaluation of N2:O2 Mixture Gas

  • Lee, Sang-Ho;Choi, Eun-Hyeok;Lim, Dong-Young;Park, Kwang-Seo;Kim, Se-Dong;Lee, Kwang-Sik
    • 조명전기설비학회논문지
    • /
    • 제24권7호
    • /
    • pp.41-46
    • /
    • 2010
  • With the improvement of industrial society, high quality electrical energy, simplification of operation and maintenance, and ensuring reliability are being required. Also we request an urgent change from $SF_6$ gas to an environment-friendly gas insulation material. In this paper, the experiments of breakdown characteristics by pressure and gap change of $N_2/O_2$ mixture gas through a GIS (Gas Insulated Switchgear) model were described. This paper reviews basic data of the surface discharge characteristics for Teflon resin in not only pure $N_2$, $N_2:O_2$ mixture gas as being focused on environmentally-friendly insulating gas, but also $SF_6$. Also, insulation characteristics by breakdown voltage and surface discharge voltage of $N_2:O_2$ mixture gas in the experimental chamber were studied.

GIS based Water-pollutant Buffering Zone Management

  • Kim, Kye-Hyun;Yoon, Chun-Joo
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.506-506
    • /
    • 2002
  • S. Korean Government has accelerating its efforts to enhance the quality of the drinking water. The Ministry of Environment has declared the law of securing water-pollutant buffering zone to minimize the inflow of the point and nonpoint sources into the drinking water sources. As a first phase of installing nationa-wide water-pollutant buffering zone, approximately 300km buffering zone has been delineated along the South and North Han river, the major drinking water sources for the capital area of S. Korea, which has the population of more than 12 millions. The buffering zone has the width of 1,000 meter for the special protection area, and 500 meter for the remaining area from both ends of the river. The major works have been done in three stages. Firstly, the boundaries lines of the buffering zone was delineated on the digital topographic maps. Secondly, the maps were overlayed with the cadastral maps to identify individual land parcels, the street address of the major pollutant discharging facilities, and all different types of pollutants including livestocks. Thirdly, the field work has been done as a verification. Once the buffering zone was generated, all the information for the buffering gone were created or imported from other government agencies including official land price, details of the major manufacturing facilities discharging considerable amount of pollutants, major motels and resorts, not to mention of restaurants, etc. Also, major livestock houses were located to identify the path of the pollutant inflow to the drinking water source. Further works need to be continued such as purchasing private lands within the buffering zone and change the land use in the efforts to decrease the pollutant amount and to provide more environmentally friendly space. Also, high resolution satellite imagery should be utilized in the near future as a cost-effective data source to update all the landuse activities within buffering zone.

  • PDF

환경친화적인 도로건설을 위한 생물서식처 보전가치 평가 및 지도화 (Drawing of Habitat Assessment Map and Conservation Value Assessment for Environmental Friendly Road Construction)

  • 강호근;박미란;박태권;김흥래;이상은
    • 대한환경공학회지
    • /
    • 제31권8호
    • /
    • pp.611-618
    • /
    • 2009
  • 도로건설은 생물서식지를 단절시키고 고립시키는 등 생태환경 훼손이 우려되고 있으며, 도로건설에 따른 환경영향을 최소화하고 생물서식환경을 보존하기 위한 종합적인 평가기법의 개발 및 적용에 관한 연구가 필요하다. 따라서 본 연구에서는 자연생태계의 자연성뿐만 아니라 동물이 서식하는 생태계의 기능을 고려한 보전가치평가기법을 적용하여 이를 도면화 할 수 있는 서식처평가지도를 개발하고자 하였다. 서식처보전가치평가에 적용한 평가 항목은 크게 자연성, 희귀성, 기능성 항목의 3가지 항목으로 선정하였으며 이에 따른 세부평가항목을 구성하였다. GIS를 이용하여 평가기준에 따라 중요도에 대한 수치지도를 작성하였다. 연구결과 나타난 수치지도는 단순히 동물과 식물의 종 조성이나 분포에만 한정된 것이 아니라 서식처 보전을 위한 종합적인 생태계 평가기법이 가능함을 보여주었고, 이를 통하여 생태계 파괴 및 생물 서식처 단절을 최소화 한 환경친화적인 도로건설에 이용될 수 있을 것으로 판단된다.

도시하천 복원경로 추적방안에 관한 연구 (A Study of Restoration Path Tracking Method for Urban Stream)

  • 임용호;엄정섭
    • 한국공간정보시스템학회 논문지
    • /
    • 제10권2호
    • /
    • pp.25-33
    • /
    • 2008
  • 본 연구의 목적은 도시의 질적 성장에 필요한 수공간 확보방안으로 도시화 과정에서 사라진 소하천을 찾아내고 찾아진 소하천을 복원할 때 도시의 현실에 맞는 적절한 경로를 찾는 방법을 찾는 것이다. 연구결과 GIS를 이용하여 도시내의 사라진 소하천을 발견할 수 있었으며 발견된 소하천을 복원할 경우 영향을 주는 요인으로 고도, 토지이용, 지가를 선정하여 각각의 요인별 최적경로를 분석하였고 3가지 요인을 모두 반영한 최적경로를 분석하였다. 3가지 요인이 하천복원에 미치는 영향이 서로 다르기 때문에 중요도에 따른 최적의 가중치를 찾아내고 최적가중치를 이용하여 최적의 복원경로를 추적하는 방법을 개발하였다. 본 연구의 결과는 친환경도시건설과 도시민의 쾌적한 삶을 위해 사라진 하천을 복원경로를 찾는데 기여할 것이다.

  • PDF

고랭지 농업의 작물별 객토량 변화에 따른 토양유실 저감 분석 (Analysis of Soil Erosion Reduction Ratio with Changes in Soil Reconditioning Amount for Highland Agricultural Crops)

  • 허성구;전만식;박상헌;김기성;강성근;옥용식;임경재
    • 한국물환경학회지
    • /
    • 제24권2호
    • /
    • pp.185-194
    • /
    • 2008
  • There is increased soil erosion potential at highland agricultural crop fields because of its topographic characteristics and site-specific agricultural management practices performed at these areas. The agricultural upland fields are usually located at the sloping areas, resulting in higher soil loss, pesticides, and nutrients in case of torrential rainfall events or typhoon, such as 2002 Rusa and 2003 MaeMi. At the highland agricultural fields, the soil reconditioning have been performed every year to decrease damage by continuous cropping and pests. Also it has been done to increase crop productivity and soil fertility. The increased amounts of soil used for soil reconditioning are increasing over the years, causing significant impacts on water quality at the receiving water bodies. In this study, the field investigation was done to check soil reconditioning status for potato, carrot, and cabbage at the Doam-dam watershed. With these data obtained from the field investigation, the Soil and Water Assesment Tool (SWAT) model was used to simulate the soil loss reduction with environment-friendly and agronomically enough soil reconditioning. The average soil reconditioning depth for potato was 34.3 cm, 48.3 cm for carrot, and 31.2 cm for cabbage at the Doam-dam watershed. These data were used for SWAT model runs. Before the SWAT simulation, the SWAT ArcView GIS Patch, developed by the Kangwon National University, was applied because of proper simulation of soil erosion and sediment yield at the sloping watershed, such as the Doam-dam watershed. With this patch applied, the Coefficient of Determination ($R^2$) value was 0.85 and the Nash-Sutcliffe Model Efficiency (EI) was 0.75 for flow calibration. The $R^2$ value was 0.87 and the EI was 0.85 for flow validation. For sediment simulation, the $R^2$ value was 0.91 and the EI was 0.70, indicating the SWAT model predicts the soil erosion processes and sediment yield at the Doam-dam watershed. With the calibrated and validated SWAT for the Doam-dam watershed, the soil erosion reduction was investigated for potato, carrot, and cabbage. For potato, around 19.3 cm of soil were over applied to the agricultural field, causing 146% of more soil erosion rate, approximately 33.3 cm, causing 146% of more soil erosion for carrot, and approximately 16.2 cm, causing 44% of more soil erosion. The results obtained in this study showed that excessive soil reconditioning are performed at the highland agricultural fields, causing severe muddy water issues and water quality degradation at the Doam-water watershed. The results can be used to develop soil reconditioning standard policy for various crops at the highland agricultural fields, without causing problems agronomically and environmentally.