• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.25-37
• /
• 2014

In load and resistance factor design (LRFD) method, resistance factors are typically calibrated using resistance bias factors obtained from either only the data within ${\pm}2{\sigma}$ or the data except the tail values of an assumed probability distribution to increase the reliability of the database. However, the data selection approach has a shortcoming that any low-quality data inadvertently included in the database may not be removed. In this study, a data quality evaluation method, developed based on the quality of static load test results, the engineering characteristics of in-situ soil, and the dimension of aggregate piers, is proposed for use in constructing database. For the evaluation of the method, a total 65 static load test results collected from various literatures, including static load test reports, were analyzed. Depending on the quality of the database, the comparison between bias factors, coefficients of variation, and resistance factors showed that uncertainty in estimating bias factors can be reduced by using the proposed data quality evaluation method when constructing database.

• Journal of Korean Society on Water Environment
• /
• v.32 no.4
• /
• pp.349-356
• /
• 2016

Total Maximum Daily Loads (TMDLs) System has been used to improve water quality in the Youngsan·Tamjin river basin since 2004. The Basic Policy of TMDLs sets up the standard flow based on the average dry condition or mid-range flow during the last 10 years. However, Target Water Quality (TWQ) assessment on TMDLs has been used to evaluate water quality through eight-day intervals over 36 times a year. The results for allocation evaluation and target water quality evaluation were different from each other in the same unit watershed during the first period. In order to improve the evaluation method, researchers applied Load Duration Curve (LDC) to evaluate water quality in nine unit watersheds of the Youngsan·Tamjin river basin. The results showed that achievement rates of TWQ assessment with the current method and LDC were 67~100% and 78~100%, respectively. Approximately 11% of the achievement rates with use of LDC were higher than those with use of the current method. In conclusion, it is necessary to review the application of the LDC method in all Four Major River Watersheds.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.3
• /
• pp.91-101
• /
• 2011

The purpose of this study is to suggest a landscape resources evaluation strategy of rural waterfront villages along the river. This strategy consists of three phases: 1) an evaluation of rural amenity landscape resources, 2) an evaluation of water landscape resources, and 3) development of a positioning map based on the results of phase 1) and 2) the study result as follows. First, the evaluation method used in phase 1) was modified as a set of proposed evaluation indicators to assess development potential on rural waterfront villages. Second, to evaluate water landscape resources in rural waterfront villages, a series of evaluation index was developed including water area, diversity of water resources, biodiversity, and landscape quality. And the last, the positioning map showed relative position of waterfront villages obtained from two evaluation results: rural amenity landscape resources and water landscape resources. The study examined the proposed strategy as a possible alternative to evaluate landscape quality to 398 rural waterfront villages along the Han River. Landscape resources evaluation strategy proposed here could contribute to government officials and planners to operate systematic planning and management of rural waterfront villages.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.421-424
• /
• 2007

Currently domestic criteria for the aircraft noise is being adapted WECPNL(weighted equivalent continuous perceived noise level), while internationally preferred method is $L_{dn}$ which is based on from $L_{eq}$ and can also evaluate environmental noise. WECPNL used in domestic as an evaluation metric is only for the aircraft noise. It is, therefore, not adequate for the evaluation of residents' injury, moreover, it is very difficult to measure the aircraft noise by WECPNL due to the complicated calculating procedures as long as automatic measuring system is not used. Accordingly, this study aims to propose alternative evaluation metric for the aircraft noise. To achieve this purpose, WECPNL, $L_{eq}$, $L_{dn}$, other metrics and criteria were compared and analyzed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.57-73
• /
• 2020

A study was conducted to present the criteria for evaluating the revegetation method of the slope of the expressway. The results of comparative analysis between 2019-2020 field survey and existing research data (2015-2016) are as follows. Soil is a very important factor at the beginning of revegetation work. However, after the plant has settled, the importance of the soil composition diminishes. Among the plants used, the number of plants sown at the beginning gradually decreases. And it changes as it competes with invading plants. Among the plants used for sowing, it was found to affect the vegetation composition in the order of exotic grass > native herb and wildflower > native tree. Plant coverage is continuously evaluated as an important factor regardless of the time. The vegetation structure on the slope will change continuously over time. New items need to be evaluated in situations where a lot of time has elapsed since the application of revegetation work. It is desirable to use the current evaluation standard only to perform the evaluation within 1 to 2 years. In the long run, it is necessary to establish a new evaluation standard that adjusts the weights of each item.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.729-738
• /
• 2021

The purpose of this study was to suggest an improvement plan ultimately to develop practical evaluation methods for national technical qualifications in the field of seeds and horticulture based on the National Competency Standards. Through this, national technical qualifications can be strengthened in terms of professionalism in the seeds and horticulture field. In order to conduct this study, the national technical qualification currently in use was matched to certain competency units and competency unit elements of National Competency Standards. We then visited an industrial site to understand the practical factors related to the technical, facility and equipment aspects of the seeds and horticulture industrial field, after which a practical evaluation exam was developed. Also, for a feasibility study, a pilot test assessment was conducted for students majoring in seeds and horticulture, with a survey also conducted with field experts and an advisory committee consisting of experts in seeds and horticulture. Based on the results, by suggesting an improvement plan for a practical evaluation method leading to better national technical qualifications in the field of seeds and horticulture, it was shown to be possible to improve knowledge, technical, and literacy aspects. This can lead to the training of outstanding technical professionals. Ultimately, the results here are expected to contribute to the improvement of the seeds and horticulture industry.

• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.108-123
• /
• 2015

Test and Evaluation (T&E) have been verifying the level of it's technological skill and the needed operational status of the development weapons. If the overall spectrum of test and evaluation is fulfilled substantially in the production & deployment, the needed level of the weapon system will be enhanced and also the reliability status will become higher considerably. We can know currently these issues through the mass media and all kinds of the news regarding the defense industry and programs. And so this article have studied the method of enhancing reliability of the test and evaluation, the 6 variables were selected through the discussion of the professional group. The the test and evaluation group needs consistently the professional training systems. After DT&E, we have to the event to verify the technical level of the development systems. We have to take the high level of the kinds of the environmental test. Scientific methods like system engineering will be adapted in process of the test and evaluation. The number of suitable test prototype in the test and evaluation is analysed more systematically. And we need to establish the standardization of the test and evaluation. If 6 variables are well analysed and adapted in the working field, the reliability of the test and evaluation will be considerably, the defense industry will take the chance to develope the future-oriented.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2017

Objective: Two control rooms of a petroleum complex were ergonomically evaluated for this study using diverse drawings of the rooms. The objective of the study is to show the evaluation process and its results, assessment method and essential elements for drawing-based ergonomic evaluation. Background: Ergonomics can enhance the working environment and safety for a control room when implemented effectively. A control room design was examined by ergonomists based on ergonomic principles and well-practiced standards. This study was conducted because a construction consortium wanted to perform an ergonomic evaluation of the control rooms before the construction. Method: A simple evaluation process, composed with a pre-evaluation, an evaluation and a post-evaluation, was employed to carry out the study. ISO 11064, NUREG-0700, NUREG/CR-6150, and CRIOP were reviewed to evaluate the control rooms. The assessment ranges over the control room layout, workstations, display and control, environmental requirements and safety. Three ergonomists participated in the study and performed the evaluation for two months. Results: An experienced consortium of construction companies designed the petroleum complex and control rooms. No significant ergonomic design problems were detected. Quantitative recommendations were provided for the layout and workstation dimensions. Specific design directions were also proposed for environmental requirements and safety. Conclusion and Application: Design advice and minor potential problems were reported as results of the drawing-based ergonomic evaluation. More practical suggestions could be additionally provided if an on-site assessment was conducted. However, the ergonomic evaluation used in this study could be helpful and applied to designing and evaluating other various control rooms prior to their construction.

• Hwankyungkyoyuk
• /
• v.7 no.1
• /
• pp.30-45
• /
• 1994

This study was conducted to investigate the concern of the primary school teachers and the teaching situation about the environmental education through questionnaire survey on the effective environmental education. The results of questionnaire were analysed and discussed to provide the effective teaching method for the environmental education. The result of this study is as follows. 1. It was found that teachers want to teach environmental lessons as a special subject, and the content of the environmental lessons in textbook was not enough in quantity, the living waste was the most serious ploblem. Owing to the lacking in materials for the lectures on environmental education, most teachers collect the material depending on the mass communication. Also they were more interested in the environmental lessons rather than the other lessons in textbook. But because of the lacking in administrative assistance, they have difficulty in conducting the effective environmental education. 2. The teaching method of the environmental education in most primary schools was a all together-type lecture in classroom. Owing to conducting the environmental education for the knowledge than the action through the extra activity, it was difficult to expect the effect of the environmental education. Also the rate of using the reflection materials which can be improved the studying effect was very low. 3. For the effective environmental education most teachers wanted the spot learnings and the case studies and teacher education and training to get an special knowledge for environmental education. The effective evaluation method for children's environmental education is to present the results by environmental experiences and practices and to formulate a system education is organized for the effective management and activation of environmental education. 4. By practising the seasonal spot learnings, students need to change of learning method and to realize the importance of environment through own self-experiences. 5. In the future, it is desirable that researching of an environmental education is offered the effective practising teaching method which is improving the development of customs and functions, cultivation of the sense of value, ability to solve the problem, to determine the intention as well as the survey on the real situation and the consciousness about environmental education.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.157-163
• /
• 2015

To establish National Reference Method (NRM) for $PM_{2.5}$, operational performance of 5 different commercial gravimetric-based $PM_{2.5}$ measuring instruments was assessed at Bulkwang monitoring station from January 23, 2014 to February 28, 2014. First, physical properties, design, and functional performance of the instruments were assessed. Evaluation was carried out to determine whether operating method for the instruments and levels of QA/QC activities meet the data quality objectives (DQOs). To verify whether DQOs were satisfied, reproducibility of QA/QC procedures, accuracy, relative sensitivity, limit of detection, margin of error, and coefficient of determination of the instruments were also evaluated. Results of flow rate measurement of 15 candidate instruments indicated that all the instruments met performance criteria with accuracy deviation of 4.0% and reproducibility of 0.6%. Comparison of final $PM_{2.5}$ mass concentrations showed that the coefficient of determination ($R^2$) values were greater than or equal to 0.9995, and concentration gradient ranged from 0.97 to 1.03. All the instruments satisfied criteria for NRM with the estimated precision of 1.47~2.60%, accuracy of -1.90~3.00%, and absolute accuracy of 1.02~3.12%. This study found that one particular type of measuring instrument was proved to be excellent, with overall evaluation criteria satisfied.