• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.325-335
• /
• 2011

Estuary is a transitional zone between river and ocean environment that receives the maritime and riverine influence simultaneously. Estuaries are the most productive habitats because their incoming water provides large quantities of nutrients. The Seomjin River estuary, located in the middle south of Korea, has no barrage and shows natural characteristic of estuary. However, due to dredging and reclamation the environment of the estuary has been changed significantly in the river mouth. In addition, increased freshwater intake in midstream of the Seomjin River results in salinity intrusion. In this paper salinity variation in downstream estuary of the Seomjin River has been simulated and tested using EFDC model. The results of simulation were compared with measured data collected at three points, Culture & Art Center, Sumjin Iron Bridge, and Mokdori, located at 9Km, 14Km, and 15.5Km respectively from downstream estuary. Based on the simulated results, the contribution of the flushing discharge has been evaluated in preventing the salinity intrusion by increasing the discharge flowrates released from the Juam dam.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.16-24
• /
• 2007

An investigation on the polluted sediments in the Lake Sihwa and the benthos that inhabited on the sediments was conducted. Cost effective remediation alternatives were derived form the results of the investigation. The sediment samples taken from four sampling points out of thirteen showed relatively high heavy metal (particularly copper) concentrations which exceeded the Effects Range Low (ERL) of the National Oceanic and Atmospheric Administration, USA. The four sampling points were located in front of industrial complexes. Although the heavy metals appeared to have affected the growth of the benthos, the concentration of it did not exceed the criteria of dredging that were developed by Netherlands or the State of Washington, USA. However, contamination by organic matters and sulfur compounds was severe, which exceeded the criteria of dredging that were established in Japan. The sediments taken from the four sampling points which were contaminated with heavy metals showed higher organic matter content in general. The organic matters in the sediments depleted oxygen in summer, which appeared to be fatal to the benthos. A comprehensive analysis on the sediments, benthos, and other environmental impact from the contaminated sediments drew a conclusion that the benthonic environment of the Lake Sihwa needed a stepwise remediation, giving a particular emphasis on the clean up of the sediments upstram of the Lake which could cause odor problems to the nearby residential area.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2012

This article aims to find method to mix a harmless hardening agent and soil generated during construction to make paving materials. The main purpose of this research is to get rid of the harmfulness(Chromium (VI), etc.) of cement which has been generally and frequently used as a hardening agent and strengthen it so that it can be used for the general foundation solidification and stabilization of civil engineering/construction structures such as dredging soil treatment, marine structure foundation treatment, surface soil stabilization, and river bank erosion prevention. NSS(Natural Stabilizer Soil) used for this study takes as its chief ingredient the mixture of lime and staple fibers extracted from natural fibers. It increases the shearing strength of soil that it improves the support and durability of the foundation and prevents flooding and frost as well. The pH measured to know its eco-friendliness was 6.67~7.15, and according to the migration testing, only Pb and CN were lower than the standards, so it can be said that NSS has almost no harmful components in it. According to the result of uniaxial strength testing, when the mixture ratio of weathered soil to NSS was 6%, about 1,850kpa strength was expressed. And according to the result of CBR. testing to figure out its appropriateness as a paving material, the CBR of the foundation was 4%~6%. But when the mixture ratio of NSS is over 6%, the water immersion CBR. is over 100%; thus, it is expected that it will show great utility as a paving material.

• Journal of Korea Water Resources Association
• /
• v.42 no.10
• /
• pp.891-896
• /
• 2009

The puff models have been developed to simulate the advection-diffusion processes of dredging suspended solids, either alone or in combination with Eulerian models. Computational efficiency and accuracy are of prime importance in designing these hybrid approaches to simulate a pollutant discharge, and we characterize two relatively simple Lagrangian techniques in this regard: forward Gaussian puff tracking (FGPT), and backward Gaussian puff tracking (BGPT). FGPT and BGPT offer dramatic savings in computational expense, but their applicability is limited by accuracy concerns in the presence of spatially variable flow or diffusivity fields or complex no-flux or open boundary conditions. For long simulations, particle and/or puff methods can transition to an Eulerian model if appropriate, since the relative computational expense of Lagrangian methods increases with time for continuous sources. Although we focus on simple Lagrangian models that are not suitable to all environmental applications, many of the implementation and computational efficiency concerns outlined herein would also be relevant to using higher order particle and puff methods to extend the near field.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.9
• /
• pp.19-28
• /
• 2014

It is necessary to understand the behavior of the soils for the dredging constructions. The objective of this study is to estimate void ratio and density changes of the dredged soils by using the geophysical testing methods. A series of laboratory tests is performed to obtain geotechnical index properties of the specimen, retrieved from the west coastal of Korea. The sedimentation and self-weight consolidation tests are carried out with observing changes of the interfacial height and the elastic wave velocities. The same amounts of the soils are poured into the testing column at intervals of 12 hours until the interheight reaches to a certain level. After the completion of the sedimentatation and self-weight consolidation tests, downward permeability test is performed to assess a tidal influence in the nearshore. The mini resistance cone is penetrated into the specimen to measure the electrical resistivity with depth. All tests are completely finished, the weight of specimens are measured to calculate the void ratio with the depth. Experimental results show that the aspects of the self-weight consolidation are invisible during dredging process because of rapid sedimentation characteristics of ML. However, the elastic wave velocities increase with increasing in the effective stresses. During permeability test, measured permeability and the elastic wave velocities maintain almost identical values. Void ratio based on the elastic wave velocities changes linearly with time during the step dumpings. Void ratio estimated by the electrical resistivity represents the repeatedly layered depositions according to the step-by-step dumpings. Void ratio determined by soil sampling is similar to those of elastic waves and electrical resistivity profiles. This experimental study demonstrates that the geophysical testing methods may be an effective method for evaluating the behavior of dredged soils.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.41-48
• /
• 2010

In this study, grain size distribution of dredged soil and suspended solid distribution of supernatant in containment area were measured and compared with design prediction for suitability evaluation on prediction of suspended solid concentration of supernatant in conventional design of containment area. In addition to that, relationship were also analyzed between current velocity and suspended solid concentration of supernatant. Evaluation results show a relatively good agreement between field measurement and design prediction. On contrast, field measurement and design prediction show a quite different value each other in the early stage of dredging or at a point that current velocity increases. It is believed that this is due to that conventional design method of containment area does not account for ponding depth and current velocity which change sensitively with dredging period. Since current velocity and distribution of suspended solid concentration measured simultaneously show a similar trend, it is observed that there exists a close relationship between current velocity and distribution of suspended solid concentration. Therefore, a new design method for containment area, which can consider sedimentation of suspended solid that changes with interface height of dredged soil, ponding depth, current speed of supernatant, is necessary in order to predict the situation change of containment area more precisely.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.25-34
• /
• 2018

This study presents prediction and historical analysis of the long-term bed elevation change in the Mankyung-gang River. The study area is a 25 km long reach including middle and lower courses of the Mankyung-gang River. HEC-RAS program was used for numerical predictions, and values of roughness coefficients were calibrated. Then, predictions were made in the two periods, seven years from 1986 to 1993 and twelve years from 1993 to 2005. Simulation results were compared with two sets of measured data for bed elevations. Four sediment transport formulas, namely MPM's, Toffaleti's, MPM-Toffaleti's, and Yang's formula, were tested. Simulation results showed that none of the four sediment transport formulas predicted the bed elevation change in the period of 1986 - 1993. This is related to the fact that dredging work was performed in the upstream reach in the period of 1986 - 1993, and sediment was deposited in this part severely later. However, it was found that MPM-Toffaleti's formula predicted properly the bed elevation change for the period of 1993 - 2005.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.89-98
• /
• 2009

In this research, settling tests with marine clays in Korea and extensive literature review were performed to investigate the characteristics of sedimentation and consolidation so that their behaviors during dredging and reclamating could be evaluated. Design parameters related to Yano's method (1985), one of experimental approaches having been used widely in Korea to estimate sedimentation and consolidation, were analyzed and their proprieties were reassessed. For samples from four different sites of south and west coasts in Korea respectively, settling tests with 1m height of columns were carried out, changing initial water content and height of sample in order to evaluate settling and consolidation characteristics of them from analyzing test results. More reliable regression curves than values from literature review were obtained as analyzing test results of estimating coefficient of sedimentation/ consolidation and initial setting velocity with changing initial water content. Relation between height of soil solid and surface height of slurry at the stages of initiation and termination of consolidation was also assessed. Finally, for marine clays of south and west coasts of Korea, ranges and average values of these design parameters were evaluated and typical empirical equations between these design parameters were also proposed. On the other hand, comparisons of characteristics of sedimentation and consolidation between marine clays from south coast and them from west coast were also performed.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.386-393
• /
• 2009

This study was carried out to assess water quality and to introduce the management measures for water quality improvement with the collected data from 87 agricultural reservoirs in Han river watershed. According to the water quality criteria (WQC) for lake based on the COD, TP, TN and chl.a concentration, 18, 16, 4 and 19 of 87 reservoirs exceed class IV, respectively. Based on the trophic state index (TSI) with chl.a concentration, 51 of selected reservoirs appeared to be eutrophic. Phosphorus was limiting nutrient on algal growth in 58 reservoirs. TP, chl.a and COD concentration in 23 of 49 agricultural reservoirs with chl.a concentration ${\geq}25{\mu}g/L$ and eutrophic exceed class IV by WQC. Also, the mean depth in 21 of 23 reservoirs was below 5m. Our results suggest that advanced wastewater treatment and crop land control in watershed of reservoirs with TP concentration ${\geq}0.1mg/L$ would be a effective tool to improve water quality. Dredging would to be effective measure in reservoirs with mean depth < 5 m and relatively old age. In reservoirs with chl.a concentration ${\geq}50{\mu}g/L$, application of technique such dissolved air flotation (DAF) and P inactivation be effective to improve water quality by removing particulate matters in water column. The management measure to control inflow such as sedimentation basin, Pre-dam and diversion would to be application in reservoirs with shallow depth, while large watershed and surface area.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.39-46
• /
• 2019

Most of the soil used for reclamation is marine clay generated from dredging construction.The soft ground made of dredged clay has high water content and high compressibility, so the bearing capacity of the ground is very weak and it is difficult to enter the ground improvement equipment. Therefore, surface hardening treatment method is used to enter equipment prior to full-scale civil engineering work, and stabilizer is mainly used for cement series. Cement-based stabilizers have the advantage of improving the ground in a short period of time and have excellent economic efficiency, but they are disadvantageous in that they cause environmental problems due to leaching of heavy metals such as hexavalent chromium. In this study, environmental effects evaluation of dredged clay mixed with normal portland cement and environmentally friendly stabilizer was evaluated, and uniaxial compressive strength test and indoor model test were conducted to confirm the bearing capacity characteristics of the solidified layer.