• Archives of design research
• /
• v.16 no.2
• /
• pp.141-150
• /
• 2003

In estimating designed architectural buildings, many factors in various design domains such as function, structure, form, environment may be considered and then a building design might be selected or modified as final design. This paper proposed a method to obtain complexity values from two dimensional drawings which are floor plans or elevations. The method has been developed based on information theory, shape pattern representation and cognitive theory. Results of measuring complexity value can make the computer evaluate and select final results produced from automatic design processes by the computer That is to say, aesthetic values based on order and chaos can be measured using complexity values and then some results having superior values can be selected as final result.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.707-719
• /
• 2003

The D&D work requires worker's safety and high reliability of operation because it has been processing in high radioactive environment. Therefore, it is necessary to select the dismantling items and applicable dismantling technologies and analyze the scenarios for selected items. In this paper, the main dismantling items were selected by the consideration of several factors, their 3D CAD models were constructed as well. The applicable dismantling technologies for each dismantling items were selected and their dismantling scenarios were setup. Finally the 3D graphic simulations for the shielding concrete, the RSR, and the core are performed.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.2
• /
• pp.77-87
• /
• 2006

It is necessary to change the existing design process to cope with a short life-cycle product and various customer's demands. Also a frequent design change may delay the whole design process and it will increase the unit cost of the production. New alternatives or techniques have emerged to solve the existing design problems, such as a knowledge based engineering, an intelligent CAD, a function based design, and so on. In this paper, we propose a hybrid design system with a knowledge based design methodology and a function based design technique. The knowledge based design is good at a frequent design change and the function based design is effective to extract a core design behavior. In an early design process, the system utilizes a core design behavior through the function based design process. On the other hand, the system manages complicated design issues with the knowledge based design technique in the detailed design process. We conclude that the hybrid design system can bring fair effects on implementing an efficient design environment in aspect of time and expense.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.937-944
• /
• 2006

Although people's anxiety about the environmental problem has been getting higher, they are not provided good quality of knowledge about the environment. Based on this situation, Ecoblog can be a new type of online community to educate the public in ecological knowledge. Especially, Ecoblog can be utilized as a method of "preventive education", and it will contribute to reduce great amounts of environmental budget to restore contaminated environment to previous condition. Ecoblog also utilizes the concept of blog which user can create and append their site with chosen themes. A weblog or a blog is a non-commercial webpage regularly updated through the use of a blogging software which allows the user to "publish" kinds of amalgamations of text and graphics to the page as posts. The technology offered in Ecoblog is utilizing the concept of 4D place and game metaphor in order to provide users the sense of participation, interaction and immersion among them and the growing community. Thus, it requires applying the CAAD technology by implementing semantically well-defined building data model as a core database to create a 4D virtual community. This research focuses on defining a 4d spatial framework suitable for developing an online ecological community. Through our study, the state-of-the-art of online community has been studied at the first step. Second, the scenario of using EcoBlog described with content, visualization and navigation are defined based on the critical features derived at the first step. Finally, a 4d spatial framework composed of semantic building data model, content and rule database is constructed to propose factors that are necessary to establish an ecological virtual community. In conclusion, our framework could enhance the comprehension and interaction between users and virtual buildings in the ecological community by integrating the concept of game design, 4D CAD and semantic data model. Such framework can be applied to any online community for an educational purpose.

• Ocean and Polar Research
• /
• v.39 no.3
• /
• pp.205-211
• /
• 2017

This paper seeks to provide a dynamic analysis of a 150 ton winch based on ocean environmental data. The winch model that was subjected to analysis was modeled from CAD to each subsystem by the commercial software DAFUL. The winch model has tree brake systems (disk brake, band brake and ratchet brake). The rotation motion of the motor and contact elements of the brake are applied to the winch model in order to analyze its dynamic characteristics. In addition, a crane-barge was modeled to apply ocean environmental data. The motion data of the crane-barge was produced by means of the RAO(Response Amplitude Operator) of the barge and wave spectrum. The reaction force of the translational joint was measured instead of the tension of the cable. The brake performance of the winch was produced and assessed based on the operating motion of the crane-barge.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.407-417
• /
• 2019

When a free-falling ballistic missile intercepts a maritime target in a sea clutter environment at high grazing angle, detection performance of the ballistic missile's seeker can be rapidly degraded by the effect of sea clutter. To solve this problem, it is necessary to verify the performance of maritime target detection via simulations based on various scenarios. We accomplish this by applying a two-dimensional cell -averaging constant false alarm rate detector to a two-dimensional radar image, which is generated by merging a sea clutter signal at high grazing angle with a maritime target signal corresponding to the signal-to-clutter ratio. Simulation results using a computer-aided design model and commercial numerical electromagnetic solver in various scenarios show that the performance of maritime target detection significantly depends on the grazing and azimuth angles.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.22-27
• /
• 2004

To handle the high level radioactive materials such a spent fuel, the master-slave manipulaters (MSM) are wide1y used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD model using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility. The 3D graphic simulator using the extermal input device of spare ball displays the movement of manipulator. To connect the exterral input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result show that the developed simulation system gives much-improved human interface characteristics and shows satisfactory reponse characteristics in terms of synchronization speed. This should be useful for the development of work`s education system in the environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.534-540
• /
• 2013

Interest of the hand effect on the electromagnetic wave are internationally increasing with the increase of the use of the mobile phone. IEC TC106(International Electrotechnical Commission, Technical Committee 106) promotes international research exchange program in order to reflect the effect of human hands in the standard assessment method of human exposure dosimetry by the electromagnetic wave of mobile phones. Since current commercialized hand phantom is manufactured by taking into account the average size of westerners and provides only one grip posture, it imposes many restrictions on the accurate SAR measurement. Therefore, the development of proper hand phantom accounting for domestic situation and various grip posture capability is essential in order to analyze the accurate effect of human hand on the exposure estimation. In this paper, a jelly hand phantom suitable for Korean was manufactured with various grip posture capability at 835 MHz and 1,800 MHz bands. Although the tolerances of permittivity and conductivity of the manufactured hand phantom are with ${\pm}10%$ each, it was much less than CTIA(Cellular Telecommunication Industry Association) tolerance of ${\pm}20%$ at both bands. Its 3D CAD(3 Dimensional Computer Aided Design) file which was developed can be utilized for the simulation of human hand effect on SAR measurement of mobile phones. The findings in this study can be utilized for the analysis of human hand effect on SAR measurement of a mobile phone.

• Archives of design research
• /
• v.14
• /
• pp.109-119
• /
• 1996

One of the most important factors in the work environment of the industrial design is the design process which can systematically synthesize the informations of related fields. Because the computer technology is being radically developed, industrial should not only positively be able to cope with new technologies, but also should positively be able to take part in the development of the integrated system for the process by the new technologies. Recently in the industrial design field, designers are often using the computer~applied-3D modeling techniques in the development process of industrial design products, especially in the visualization level of the design development. In this paper, we studied the workstation modeling process to understand the computer~applied-3D modeling and presented the methods of transfer of the 3D-modeling data of a workstation(SGI) to the AutoCAD data of a personal computer which is generally being used as a drawing tool in mechanism parts. Through the development process of an electronic taxi meter as a practical case study, we check the possibility whether the 3D-modeling data transferred from an industrial design part to a mechanism part can directly be used as the mechanism data. For this, we transferred the 3D-modeling data of an electronic taxi meter created with a workstation(SGI) to the AutoCAD data of a personal computer and checked the usefulness of data transferred from an industrial design part to a mechanism part. Through these processes of data transfer, we aimed to find out the basic principles which can be rationally applied to a mechanism part or a production part.