• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.156-163
• /
• 2008

화학공장에서는 공정 이상, 장치 수명 및 경제적 환경 등에 의하여 변경이 발생하고 있다. 그리고 변경관리는 정확한 기술적 판단근거에 의한 변경 판정, 위험도 확인 및 위험성 평가 수행 등 근본적인 공정안전 기술을 바탕으로 이루어진다. 그러나 변경관리는 경험 부족, 지식 부족 및 기술인력 부족 등의 이유로 수행하기 매우 어려운 상황에 놓여있다. 본 연구에서는 화학공장 변경관리의 취약점을 파악하고 이를 적절히 보완하여 안전성을 향상할 수 있는 변경관리 체계를 구축하였다. 위험성 평가를 기반으로 하는 변경관리 절차의 정립 및 변경 여부 판단, 변경시 위험도 산정 등 변경관리 의사결정 단계들의 명확한 판단 기준 체계 정립을 통한 장치산업의 변경관리 수행 체계를 제안하였다. 이러한 안전공학 기술이 접목된 형태의 변경관리 절차를 제안하여 화학공장의 안전성 향상을 꾀하고자 하였다.

• 한국물환경학회지
• /
• 제20권4호
• /
• pp.339-345
• /
• 2004

The characteristics of $H_2$ production from livestock wastewater were investigated through an anaerobic acid forming process using Clostridium beijerinckii and the photosynthetic process using Rhodobacter sphaeroides. The submerged separation membrane was installed in the acid forming reactor, The photosynthetic process is composed of two reactors(photosynthetic reactor 1 and photosynthetic reactor 2) which is connected continually. The removal rate of COD and the production of volatile fatty acid(VFA) in the acid forming process were approximately 50% and 1000mg/L, respectively. The 70% of COD in the effluent of acid forming process was removed through the photosynthetic process. The production of $H_2$ in the photosynthetic reactor 1 and 2 was 50 and $25mLH_2/gVFA_{COD}$, respectively. The values of Y in acid forming reactor, photosynthetic reactor 1 and 2 was 0.2263, 0.0601 and 0.0393, respectively. The acetic acid and butyric acid produced in acid forming process were converted to $H_2$ by photosynthetic bacteria.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.888-893
• /
• 2016

In this study, the solution plasma process was utilized with the aim of degrading synthetic dyes in water at atmospheric pressure. The experiments were conducted in a batch-type reactor consisting of a symmetric wire-wire electrode configuration with rhodamine B (RhB) as the target synthetic dye. The effects of the plasma treatment time and initial dye concentration on the RhB degradation were investigated by monitoring the change in absorbance of RhB solutions. The RhB solutions turned lighter in color and finally colorless with prolonged plasma treatment time, indicating the destruction of dye molecules. The RhB solutions were found to have degraded, following the first-order kinetic process. However, for high initial RhB concentrations, another kinetic process or factor seems to play a dominant role at the initial degradation stage. The fitted first-order rate constant decreased as the initial concentration increased. This result suggests that the degradation behavior and kinetic process of the RhB solution strongly depends on its initial concentration. The RhB degradation is considered to be due to a combination of factors, including the formation of chemically oxidative species, as well as the emission of intense UV radiation and high-energy electrons from the plasma. We believe that the solution plasma process may prove to be an effective and environment-friendly method for the degradation or remediation of synthetic dye in wastewater.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.204-211
• /
• 2010

Recently, business process management has become an important concept to define and execute business process. During the execution of the collaborative business processes defined by the consensus with manufacturing enterprises, a lot of variations can be occurred by various internal and external factors related to business. From this reason, manufacturing enterprises have tried to seek for a technology to define and execute the collaborative business process systematically under the dynamic situations approving process variation. This study defines the collaborative business process among manufacturing enterprises at first and proposes its execution technology under the dynamic situations. Here, the proposed execution technology includes the authority management of each process, sub-process, and activity for security, the forced execution of the incomplete process containing the undefined sub-process, the re-execution in a certain range of business process for correcting errors, and the dynamic selection of sub-process. Furthermore, this study implements a prototype system to check the validity of its application under the dynamic situations.

• Journal of Microbiology and Biotechnology
• /
• 제13권4호
• /
• pp.578-583
• /
• 2003

The desulfurization genes (dszABC) were cloned from Gordonia nitida. Nucleotide sequences similarity between the dszABC genes of G. nitida and those of Rhodococcus rhodochrous IGTS8 was 89%. The similarities of deduced amino acids between the two were 86% for DszA, 86% for DszB, and 90% for DszC. The G. nitida dszABC genes were expressed in several different Escherichia coli strains under an inducible trc promoter. Cultivation of these metabolically engineered E. coli strains in the presence of 0.2 mM dibenzothiophene (DBT) allowed the conversion of DBT to 2-hydroxybiphenyl (2-HBP), which is the final metabolite of the sulfur-specific desulfurization pathway. The maximum conversion of DBT to 2-HBP was 16% in 60 h. Recombinant E. coli was applied for the deep desulfurization of diesel oil supplemented into the medium at 5% (v/v). Sulfur content in diesel oil was decreased from 250 mg sulfur/1 to 212.5 mg sulfur/1, resulting in the removal of 15% of sulfur in diesel oil in 60 h.

• 플랜트 저널
• /
• 제5권3호
• /
• pp.50-58
• /
• 2009

In this paper, the present condition for localization of process pumps and the enhancement method of the localization ratio of process pumps for refinery and chemical plant market were studied. The market of plant industry in the world has grown rapidly since 2000. However, the profit of domestic plant EPC compaies cound not have been increased as much as the market scale because they procured most of equipment from overseas. To make remarkable profit of plant EPC companies in the petrochemical industry, localization of equipments is required. Suitable equipment for localization is process pump applied API 610 standard. An purchased amount of pumps from overseas by domestic plant EPC companies in the last two years were 230 billion won. If process pumps are localized then an profit of plant EPC project will increase.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1371-1374
• /
• 2004

The control system design of 2-DOF for SISO process by root locus technique is not complicated and efficiently. It can design the control system to have the transient and steady state responses, and do not adjust the gain of process controller later. However, due to control system design for MIMO process, by root locus technique, there is not exact method. This paper is presents the control system design method for Quadruple-Tank Process, by using root locus technique for the structure of 2-DOF control system. The design procedures are first decentralized then using the relative gain array, and finally 2-DOF controller design is applied.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.687-690
• /
• 2003

This paper presents the development of Programmable Logic Controller (PLC) and network to design the redundant control system in order to control the high priority process. The industrial process that cannot be shutdown or the effect of the shutting down takes abundantly damage. In this article, we say that the high priority process. The redundant systems are designed for controlling the high priority process that the control system must have many controllers to instead the main controller when it has some error. This paper we designed the redundancy control system by the advantage of the high-speed communication on the PLC’s network. The temperature control system and the traffic light control system used as the case study. Each example processes consist of two sets of controller. Our scheme we can increase the reliability prevents process down time and reduces the cost of opportunity to loss also.

• 대한산업공학회지
• /
• 제35권1호
• /
• pp.40-50
• /
• 2009

Knowledge-based services are largely dependent upon human-driven works. Therefore, considering human characteristics is required when modeling processes for knowledge-based services. As an emerging technology for Business Process Management, Human Interaction Management and its supportive process management can be an alternative to deal with human-driven processes. However, current HIM does not suggest concrete method for modeling conditions that are essential to realize supportive process management. And the condition modeling of HumanEdj, the only HIM software implemented, reveals the problem of complexity. As a solution, this paper suggests a fact-oriented ontological approach to process modeling. The approach uses human-friendly form of facts for condition modeling.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.145-154
• /
• 2002

CMP (Chemical mechanical polishing) process was used to control the fine grinding process induced mechanical damage of Cz Silicon wafer. Characterization of mechanical damage was carried out using Nomarski microscope, magic mirror and also using angle lapping and lifetime scanner evaluation after heat treatment. Magic mirror and lifetime scanner were very useful for the residual damage pattern characterization and CMP process was effective on the reduction of fine grinding induced mechanical damage.