• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.251-258
• /
• 2016

This article reports current status of micro fuel cell-combined heat and power (${\mu}FC$-CHP) systems which utilize both power and heat generated by fuel cells. There are several options for constructing CHP systems and among them, fuel cells are the most useful and their total energy efficiency combining heat and power can reach up to about 90%. Fuel cells are classified as five types based on the electrolyte, but the most suitable fuel cell types for the ${\mu}FC$-CHP system are proton exchange membrane fuel cells (PEMFCs) and solid oxide fuel cells (SOFCs). ${\mu}FC$-CHP systems have several advantages such as decrease of the transmission-distribution loss, reduced costs of electricity due to distributed power generation, and environmental-friendliness owing to zero emission. The main drawback of the ${\mu}FC$-CHP systems is the high initial investment, however, it keeps decreasing as the technology development reduces production costs. Currently, Japan is the most leading country of the ${\mu}FC$-CHP market, however, Korea tries to expand the market by planning the deployment of 1 million units of ${\mu}FC$-CHP systems and governmental subsidiary supporting of half of the install price. In this report, integration technologies for connecting FC and CHP, and technology trends of leading countries are presented as well.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.112-119
• /
• 2015

Photoacoustic microscopy is capable of providing high-resolution molecular images, and its spatial resolution is typically determined by ultrasonic transducers used to receive the photoacoustic signals. Therefore, ultrasonic transducers for photoacoustic microscopy (PAM) should have a high operating frequency, broad bandwidth, and high signal-reception efficiency. Polyvinylidene fluoride (PVDF) is a suitable material. To take full advantage of this material, the selection of the backing material is crucial, as it influences the center frequency and bandwidth of the transducer. Therefore, we experimentally determined the most suitable backing material among EPO-TEK 301, E-Solder 3022, and RTV. For this, three PVDF high-frequency single-element transducers were fabricated with each backing material. The center frequency and -6 dB bandwidth of each transducer were ascertained by a pulse-echo test. The spatial resolution of each transducer was examined using wire-target images. The experimental results indicated that EPO-TEK 301 is the most suitable backing material for a PAM transducer. This material provides the highest signal magnitude and a reasonable bandwidth because a large portion of the energy propagates toward the front medium, and the PVDF resonates in the half-wave mode.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2011

Recently, the visual grading rule of Korea Forest Research Institute (KFRI) was revised and it is necessary to investigate the distribution characteristics of visual graded lumber in accordance with the revised rule. Therefore, in this study, the distribution characteristics of bending strength was investigated with revised visual grading rule and changed prior rule, respectively. The size of specimens was $38{\times}140{\times}3,000$ (mm) and the species were $Larix$ $kaempferi$ and $Pinus$ $koraiensis$. The moisture content was under 18% and the specimens were tested in accordance with ASTM D-198. The number of No. 1 and 2 grades, suitable for structural lumber, was increased when the revised visual grading rule was applied. Moreover, the revised rule was more effective to distinguish sharply between No. 1 and 2 grades and below No. 3 grade. Meanwhile, the lower 5% exclusion limit and allowable stresses were generally decreased when revised visual grading rule had been applied. However, the announcement of Korea Forest Service, tested with small clear specimen, was much lower than the allowable stresses of this test, tested with structural lumber. Therefore, the revision of allowable design values should be considered for more exact use and effective structural design.

• Journal of Food Hygiene and Safety
• /
• v.31 no.3
• /
• pp.176-185
• /
• 2016

This study was performed to investigate elementary school children's awareness on children's favorite foods and their consumption behavior of the foods. This study also focused on the association between the variables and gender/grade. We conducted a cross-sectional survey with direct interview among three hundreds and six elementary school children (188 boys and 118 girls) from 13 schools of a city of Korea, using a structured questionnaire. Among the overall proportion, more than 20% of the respondents did not know children's favorite foods and/or have no information source on the foods. More than 60% of the respondents consumed children's favorite foods more than 1 to 2 times a week. Only 16% respondents got information on children's favorite foods at home and 37% at school. There were significant correlations (p < 0.05) between gender/grades and knowledge/route of information on children's favorite foods. Boys had more knowledge than girls (p < 0.05), however they showed worse attitude on children's favorite foods and consumed more the foods. The higher grade children had more knowledge, better attitude and various routes of information on children's favorite foods (p < 0.05), but consumed more the foods. The results of this study indicate that there is a discrepancy between knowledge and attitude/behavior. This study also indicate that school food-service program and food hygiene/safety education in school and at home should be improved. Strong implementation of laws for regulation of selling adulterated food around elementary school may be another step in controlling consumption of the food by school children.

• Korean Journal of Social Welfare
• /
• v.37
• /
• pp.171-193
• /
• 1999

The ultimate goal of rehabilitation is social integration. Reemployment is, for the disabled workers, the primary source of not only income, but also identity and interaction. Unfortunately, for most disabled workers employment represents only a yet-to-be-fulfilled hope, a close but inaccessible goal, a daily reminder that they are not among the majority. The purpose of this study is to estimate reemployment rate in the industrial injured and to find factors affecting reemployment of disabled workers owing to industrial injury, and to make policy implication for the better industrial injury compensation rehabilitation system. The data were obtained through telephone interview with disabled worker who completed work injury compensation process in 1996-1997. The final sample was consisted of 1,060 respondents. The major findings were that almost lout of 3 disabled worker returned to work, and that the factor affecting reemployment of the disabled workers were severity injury, ADL(activity of Daily Living), the perception of disability severity, controlling for the demographic factors such as sex, age, education, marital status. The results indicated that psychosocial factors as well as physical function had influces on returning to work. The current findings suggests that rehabilitation services and policy aimed at enhancing vocational rehabilitation program and rehabilitation engineering services, and improving psychosocial resources should be considered by rehabilitation professionals and policy makers.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.621-630
• /
• 2013

Several techniques for steel corrosion detection are proposed and HCP (half cell potential) technique is widely adopted for field investigation. If concrete has cracks on surface, steel corrosion is rapidly accelerated due to additional intrusion of chloride and carbon dioxide ions. This study is for an evaluation of HCP in cracked concrete exposed chloride attack. For this work, RC (reinforced concrete) beams are prepared considering 3 w/c ratios (0.35, 0.55, and 0.70) and several cover depths (10~60 mm) and various crack widths of 0.0~1.0 mm are induced. For 35 days, SST (salt spraying test) is performed for corrosion acceleration, and HCP and corrosion length of rebar are evaluated. With increasing crack width, w/c ratios, and decreasing cover depth, HCP measurements increase. HCP evaluation technique is proposed considering the effects of w/c ratios, crack width, and cover depth. Furthermore anti-corrosive cover depths are obtained through Life365 program and the results are compared with those from this study. The results shows relatively big difference in cracked concrete, however provide similar anti-corrosive conditions in sound concrete.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.431-441
• /
• 2003

This paper presents the design of 32 bit microprocessor for a sequence control using a field programmable gate array(FPGA). The microprocessor was designed by a VHDL with top down method, the program memory was separated from the data memory for high speed execution of sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32 bits. And the real time debug operation was implemented for easeful debugging the designed processor with a single step run, PC break point run, data memory break point run. Also in this designed microprocessor, pulse instructions, step controllers, master controllers, BM and BCD type arithmetic instructions, barrel shift instructions were implemented for sequence logic control. The FPGA was synthesized under a Xilinx's Foundation 4.2i Project Manager using a V600EHQ240 which contains 600,000 gates. Finally simulation and experiment were successfully performed respectively. For showing good performance, the designed microprocessor for the sequence logic control was compared with the H8S/2148 microprocessor which contained many bit instructions for sequence logic control. The designed processor for the sequence logic showed good performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.681-689
• /
• 2019

Web usage pattern discovery is an advanced means by using web log data, and it's also a specific application of data mining technology in Web log data mining. In education Data Mining (DM) is the application of Data Mining techniques to educational data (such as Web logs of University, e-learning, adaptive hypermedia and intelligent tutoring systems, etc.), and so, its objective is to analyze these types of data in order to resolve educational research issues. In this paper, the Web log data of a university are used as the research object of data mining. With using the database OLAP technology the Web log data are preprocessed into the data format that can be used for data mining, and the processing results are stored into the MSSQL. At the same time the basic data statistics and analysis are completed based on the processed Web log records. In addition, we introduced the Apriori Algorithm of Web usage pattern mining and its implementation process, developed the Apriori Algorithm program in Python development environment, then gave the performance of the Apriori Algorithm and realized the mining of Web user access pattern. The results have important theoretical significance for the application of the patterns in the development of teaching systems. The next research is to explore the improvement of the Apriori Algorithm in the distributed computing environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1049-1061
• /
• 2013

In this paper, a relative heat exchange rate is numerically compared for cast-in-place concrete energy piles with different heat exchange pipe configurations, and a new design method for energy piles is proposed. An equivalent heat exchange rate was estimated for the W-type (one series loop), multiple U-type (four parallel loops), and coil-type heat exchanger installed in the same large-diameter drilled shaft. In order to simulate a cooling operation in summer by a CFD analysis, the LWT (leaving water temperature) into a energy pile was fixed at $35^{\circ}C$ and then the EWT (entering water temperature) into a heat pump was monitored. In case of continuously applying the artificial maximum cooling load for 100 hours, all of the three types of heat exchangers show the marginally similar heat exchange rate. However, in case of intermittently applying the cooling load with a cycle of 8 hours operation-16 hours off for 7 consecutive days, the coil type heat exchanger exhibits a heat exchange rate only 86 % of the multiple U-type due to measurable thermal interference between pipe loops in the energy pile. On the other hand, the W-type possesses the similar heat exchange rate to the multiple U-type. The equivalent heat exchange rates for each configuration of heat exchangers obtained from the CFD analysis were adopted for implementing the commercial design program (PILESIM2). Finally, a design method for cast-in-place concrete energy piles is proposed along with a design chart in consideration of typical design factors.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.423-435
• /
• 2010

The number of professionals in the science and engineering fields decreases all over the world. Especially in Korea, the declining rate of both the laborable and economically active population, aging of the population at the fastest level, and the declining birth rate make it tougher to secure the core brains of the future. After speculation of all programs above, some common factors have been derived and every program appeared to have the support for each level of inducing, caring, and utilizing. And the means of support could be categorized into the financial, legal, and social aspects. Lastly, a logical tool called Systems Thinking has been applied to the FLS Conditions and the Brain Internalization Process to assure the efficacy and applicability of the models. This is to minimize any de facto side effects by analyzing all 'feedback loops' stemming from the models. And the 'causal loop diagrams' have been utilized to come with the complementary measures. Such series of verification could convince the virtue of the models. Governments and universities can make use of the FLS Conditions and the Brain Internalization Process so the policies or plans about the foreign brains can be built in a uniformized and consistent framework. I hope, as a result, the international competency of Korea to induce and utilize the foreign brains be raised with the constant and standardized formality.