• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.365-368
• /
• 2012

본 연구에서는 계단의 상향과 하양의 이동에 관한 데이터 및 속도변화 실험식을 도출하고자 20-40대의 일반인과 60세 이상의 고령자에 대해 20층 계단에서의 이동시간 및 속도 측정실험을 수행하였다. 실험대상자는 고령자가 22명에서 30명, 일반인은 16명이었다. 그 결과 고령자의 하향이동속도 평균은 0.659 m/s로 일반인은 1.038 m/s로 나타났다. 또한 상향이동에서의 속도평균은 고령자의 경우 0.433 m/s, 일반인의 경우 0.667 m/s로 나타났다. 하지만 고령자의 상향 이동속도 최소값은 0.102m/s로 나타나 평균값과의 큰 차이를 보여주었다.

• Advances in Traditional Medicine
• /
• 제10권2호
• /
• pp.123-133
• /
• 2010

The entire plant of Leptadenia reticulata (Asclepidaceae) is extensively used as lactogen, traditionally, in veterinary practice. The plants of Dregea volubilis and Pentatropis microphylla (Asclepidaceae) are now used as its substitute and sometimes replace the original drug as traditional lactogen. The lactogenic potential of these drugs was studied in rats using, pup weight, weight of mother, parenchyma percentage, secretary rating, estimation of total protein content and glycogen content of mammary glands tissues as assessment parameters. HPTLC profiles of bioactive extracts were also generated to serve the authentification needs. The results of present studies show that P.microphylla forms a better substitute over D. volubilis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제36권12호
• /
• pp.1569-1575
• /
• 2012

In this study, ballistic impact effects on a helmet were investigated using the AUTODYN-3D program. Two types of materials were used for manufacturing the helmet: single Kevlar and Steel/Kevlar hybrid composites. Furthermore, two types of bullets were used in the simulation: steel spherical and 7.62 mm full-jacketed. In the simulation, the shape deformation of the projectile and internal energy were calculated. From the results, impact velocities above 655 m/s and 845 m/s were required to perforate the Steel/Kevlar helmet with steel spherical and 7.62 mm full-jacketed bullets, respectively. The results show that there was a large difference between the ballistic resistance of the Kevlar and Steel/Kevlar helmets. For the simulation on an NIJ-STD-0106.01 Type II helmet, a 7.62 mm fulljacketed bullet with a striking velocity of 358 m/s was used. Simulation results show that the Steel/Kevlar helmet could resist a 7.62 mm full-jacketed bullet traveling at 358 m/s.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.404-408
• /
• 2009

The liquid desiccant air-conditioning system has been proposed as an alternative to the conventional vapor compression cooling systems to control air humidity. The complete system of liquid desiccant air-conditioning system is consisted two main components those are humidifier (regeneration) and dehumidifier. Humidifier part is connected to the load when summer season which is the air condition is hot and humid have to be turned into comfort condition on human. This paper purpose is performances study of air flow rate effect on a structured packed tower on cooling and dehumidifier system using liquid lithium chloride as the desiccant. Experimental apparatus used in this present study is consisted of three components those are load chamber, packed tower and chiller. Load chamber’s volume is $40m^3$, and packed tower dimension is cubic with length 0.4m occupied with packed column. Totally, 15 experimental has done using 5 times repeat on each variable of air velocity that varying on 2m/s, 3m/s and 4m/s with other conditions are controlled. Air inlet initial temperature and relative humidity are set respectively on $30^{\circ}C$ and 52%, desiccant flow rate is 0.63 kg/s, desiccant temperature is $10^{\circ}C$ and desiccant concentration is 0.4. The result of this study shows that averagely, the moisture removal rate and the heat transfer rate are influenced by the air velocity. Higher air velocity will increase the heat transfer and decreasing the moisture removal rate. At adiabatic condition the air velocity of 2 m/s respectively is having the higher moisture removal rate acceleration then the air velocity of 3m/s and 4 m/s until the steady state condition.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.89-96
• /
• 2002

The trend of consumption of vegetable soybeans is increasing because they are recognized as the clean vegetable. The works requiring the most intensive labor are threshing and seperation ones, and they form about 80% of total labour for vegetable soybeans production. It is necessary to develop the vegetable soybeans-thresher for the sake of cost down of vegetable soybeans production. The purpose of this study is to acquire the basic informations to design of the vegetable soybeans-thresher. We make the experimental system which control the speed of threshing cylinder and the teeth gap and investigate the detachment forces. The result are as follows ; The ratio of un-threshed soybeans-pod to stem after threshing work is decreasing as the threshing cylinder speed increases: 0.0% and 2.8% at 55m/s and 18m/s of threshing cylinder speed respectively. Also the ratio of un-threshed soybeans-pod to stem is shown as 2.0% below in the condition of 64~160mm of teeth gap and over 28m/s of threshing cylinder speed. The damaged pod ratio of detached soybeans after threshing work is decreasing as the threshing cylinder speed increases: 4.8% and 1.3% at 55m/s and 18m/s of threshing cylinder speed respectively. The minimum damaged pod ratio of detached soybeans are shown as 1.0%, 1.5% and 1.9% at 18m/s, 28m/s and 37m/s of threshing cylinder speed respectively. The average detachment forces of pods are shown as 1.5kg$_{f}$ for 3 grains, 1.2kg$_{f}$ for 2 grains and 0.8kg$_{f}$ for 1 grain respectively. The maximum detachment force of pod is shown as 2.7kg$_{f}$ for 3 grains. grains.

• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.13-18
• /
• 2011

In this paper, we have examined electrical characteristics of LDO regulator according to the process variation using a 1 ${\mu}m$ 20 V high voltage CMOS process. The electrical analysis of LDO regulator have been performed with three kind of SPICE parameter sets (Typ : typical, FF : fast, SS : slow) by process variation which cause change of SPICE parameter such as threshold voltage and effective channel length of MOS devices. From simulation results, we confirmed that in case of SS type SPICE parameter set, the LDO regulator has 3.6 mV/V line regulation, 0.4 mV/mA load regulation and 0.86 ${\mu}s$ output voltage settling time. And in case of Typ type SPICE parameter set, the LDO regulatorhas 4.2 mV/V line regulation, 0.44 mV/mA load regulation and 0.62 ${\mu}s$ output voltage settling time. Finally, in the FF type SPICE parameter set, the LDO regulator has 7.0 mV/V line regulation, 0.56 mV/mA load regulation and 0.27 ${\mu}s$ output voltage settling time.

• KSBB Journal
• /
• 제21권5호
• /
• pp.371-375
• /
• 2006

Frontal analysis(FA) and Pulsed input method(PIM) have been frequently utilized to measure isotherm of single solute, as well as non-competitive isotherms of two solutes in chromatography(1). FA and PIM were used in this study as complementary methods to measure adsorption isotherms of loxoprofen racemate in HPLC. Prior to FA and PIM experiments, measurements of loxoprofen solubility were made at hexane/ethanol=50/50, 80/20, 95/5(v/v) with acetic acid(0.5%) for adjusting pH. The last composition(95/5) of hexane/ethanol allows us to separate loxoprofen racemate into two forms(retentate, extract). PIM and FA were used to determine the isotherms of re-and ex-loxoprofen.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권2호
• /
• pp.529-546
• /
• 2012

To address the need for autonomous control of remote and distributed mobile systems, Machine-to-Machine (M2M) communications are rapidly gaining attention from both academia and industry. M2M communications have recently been deployed in smart grid, home networking, health care, and vehicular networking environments. This paper focuses on M2M communications in the vehicular networking context and investigates areas where M2M principles can improve vehicular networking. Since connected vehicles are essentially a network of machines that are communicating, preferably autonomously, vehicular networks can benefit a lot from M2M communications support. The M2M paradigm enhances vehicular networking by supporting large-scale deployment of devices, cross-platform networking, autonomous monitoring and control, visualization of the system and measurements, and security. We also present some of the challenges that still need to be addressed to fully enable M2M support in the vehicular networking environment. Of these, component standardization and data security management are considered to be the most significant challenges.

• Microbiology and Biotechnology Letters
• /
• 제16권3호
• /
• pp.213-218
• /
• 1988

Studies were made to optimize the simultaneous saccharification and fermentation (SSF) of rice straw to produce butanol using Clostridium acetobutylicum KCTC 1037 and a cellulolytic enzyme preparation from Trichoderma viride. The fermentation was inhibited when the liquid enzyme preparation from Novo was used, whilst a successful fermentation was achieved in the SSF using the enzyme manufactured by Pacific Chemical Co. The minimum cellulase concentration for the successful fermentation of pure cellulose was found to be 4 IU/g of substrate used. Alkaline treatment was better method for the fermentation of rice straw by the system. SSF using 25％ alkaline treated rice straw produced 150 mM butanol, 90 mM acetone. On the other hand, fermentation of ball milled rice straw was mainly acidogenic producing 98 mM acetate and 64 mM butyrate with less than 20 mM butanol. These results show that rice straw contains (a) specific inhibitor(s) for solventogenesis which is destroyed or soluble in alkali.

• Journal of Biosystems Engineering
• /
• 제27권3호
• /
• pp.211-218
• /
• 2002

배추 생산에 있어서 수확, 운반, 적재 작업은 가장 노동이 집약적으로 요구되는 작업들이다. 최근, 여러 종류의 양배추 수화기가 일본과 유럽에서 개발되었다. 하지만 국내에서 재래되는 배추는 크기와 형태에 있어 양배추와는 달라 기 개발 기종의 도입이 어렵다. 또한 수확작업의 생력화 효과는 운반, 정선, 적재 작업과 밀접하게 연계되어 있어 출하시의 작업체계를 고려하여 수화에 따른 수집.반출 시스템을 개발하여야 한다. 수확시의 배추는 중량이 25~45 N 정도로 다 작물에 비하여 무겁고 부피가 크기 때문에 수확작업의 기계화를 위해서는 수확장치와 더불어 연속적으로 수확되는 배추를 적절하게 수집하여 적재하고 반출하는 시스템의 개발이 중요하다. 본 연구에서는 수확작업의 생력화 효과를 높이고 생력화 시스템 비용의 절감을 목적으로 작업자 1인에 의해 작업할 수 있는 반자동 형태의 트랙터 부착형 배추 수집, 적재, 반출시스템 시작기를 개발하였다. 시작기는 배추 이송장치, 적재장치, 팔렛 및 반출장치의 3개 부분과 PLC를 이용한 주 제어기로 구성하였다. 배추 수집용기로는 대략 70개의 배추를 담을 수 있는 크기가 1,050 mm$\times$1.050mm$\times$1,000mm 인 접이식 메쉬 팔렛을 사용하였으며 하단부에 롤러 안내판을 부착하여 적재한 팔렛의 배출이 용이하도록 하였다. 팔렛을 제외한 전체 시작기의 중량은 235 N 이였으며 크기는 3,940mm$\times$520mm$\times$1,630mm 이었다. 본 연구는 수확장치의 기능 및 생력화 효과를 극대화하고 배추의 손상정도를 최소화하는 시스템을 구성하고자 하였다. 이송장치는 트랙터 부착시 횡공간 점유율을 최소화하도록 하였으며 적재장치는 적재시 배추의 손상을 줄이고 배추가 놓이는 자세를 능동적으로 조절할 수 있도록 주름관을 부착하였다. 시작기의 실내시험 결과 이송장치는 0.18 m/s~0.36 m/s의 범위에서 적재장치는 0.4 m/s~2.4 m/s 범위에서 안정적으로 구동하였으며 두 장치를 동시에 구동하여 시험한 결과 이송장치는 0.26 m/s~0.36 m/s, 그리고 적재장치는 0.9 m/s~2.4 m/s 에서 적정하게 안정적으로 구동하였다. 적재장치의 성능에 있어서 1~3단 적재시에는 주름관을 이용하여 적재하고 4~5단 적재시에는 자유낙하에 의한 적재를 수행할 경우 인력에 의한 적재와 거의 동등한 적재량을 보였으며 손상정도는 거의 무시할 정도였다. 트랙터가 0.3 m/s로 주행하는 경우 노지로부터 배추를 뽑아 이송하는 뽑기벨트의 적정속도가 0.46 m/s인 점을 고려할 때 배추 이송 컨베이어는 0.34 m/s 이상의 속도를 유지할 필요가 있었으며 적재 컨베이어는 2 m/s~2.4 m/s의 속도에서 안정적으로 작동하였다. 배추의 주간 거리가 대략 30~40 cm 인 점을 감안하면 적재장치는 초당 1개의 적재성능을 보였다. 실내에서 수행한 시스템의 성능은 배추에 큰 손상없이 전반적으로 성공적으로 구동하였으나 향후 노면이 고르지 못한 포장에서의 성능 시험이 필요하다.