• Journal of Engineering Education Research
• /
• v.17 no.3
• /
• pp.51-58
• /
• 2014

The main objective of this research lies in estimating how much importance the educators of professional general education and MSC curriculum put on assessment, and, thereafter, take what support should be provided for the efficient assessment of education. The subjects of this research are educators of professional general education and MSC curriculum in the engineering education enrichment program at the 58 universities out of 72 universities where the accreditation for engineering education is implemented. Accordingly questionnaires were distributed to a total of 58 universities among which 136 questionnaires were collected. The data analysis methods, mean and response sample T test, were used in this research. The following conclusions were drawn from the results of this research. First, tile mean of importance and performance in the 'assessment activities' were relatively high. However, in tile assessment, the assessment performance was relatively lower than the assessment importance. Second, the results of the Importance-Performance Matrix in the 'assessment activities' was analyzed by two ways. First, Analyzed with the scale mean, The result means that Keep up the Good Work (KGW) sector included all factors. Second, Analyzed with the actual mean, The result means that KGW sector included 5 factors A, J, B, D, C. Possible Overkill(PO) sector included factors C, I. Low Priority(LP) sector included 4 factors K, E, H, L. Concentrate Here (CH) sector included factor G.

• Journal of Engineering Education Research
• /
• v.19 no.4
• /
• pp.60-71
• /
• 2016

Due to the development of science and technology, diversity of fusion technologies has become a major concern. Especially the application of the convergence education became necessary in the curriculum of engineering department. The purpose of this paper is to extract characteristics of convergence education among engineering majors and to present a model of applicable convergence education. The researchers collected studies of past 15 years in domestic and international journals in related themes. Academic research information systems, DBpia, e-article, Academic Search Complete were used for keyword searches. 43 Korean papers and 25 international papers were analyzed for the study. The results showed that the convergence education models for college of engineering can be classified into the three types: the cooperative convergence, multidisciplinary convergence, and transdisciplinary convergence. Based on the results, a convergence education model is suggested for the schools of engineering in Korea.

• Health Policy and Management
• /
• v.28 no.4
• /
• pp.327-328
• /
• 2018

The quality of healthcare in Korea is very good, especially in life threatening disease. However, the level of healthcare research in Korea is not good relative to that of engineering. International university rankings also were showed that engineering was generally higher ranking than medicine. The reason of this phenomenon was deeply related to expenditure on research and development (R&D). Although Korea had a lot of gross domestic expenditure on R&D (GERD), 75% of GERD was from business enterprise that was related to engineering. Healthcare expenditure of R&D from business enterprise is small. Healthcare expenditure from government budget allocation on R&D (GBARD) was smaller than engineering. Higher education expenditure on R&D of GERD was also small and the quantity and quality of researcher in higher education was not enough. For Korea's healthcare to become the growth engine for future, GBARD should be invested heavily in the healthcare, a large part of the increased GBARD must be invested in higher education, and the higher education should invest to secure the higher quality researcher stably.

• Journal of Engineering Education Research
• /
• v.15 no.4
• /
• pp.94-100
• /
• 2012

The needs for enhancing creativity in engineering design education continue to increase. Recent studies about a learning environment and learning support tools provide some new possibilities. The education of creative thinking however must begin from the change of attitude of students to creativity. The experimental results and some lessons for modification of systematic engineering design methodology to creative were reported from the course 'engineering design'.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.4
• /
• pp.730-738
• /
• 2016

est19 is a gene from Bacillus sp. K91 that encodes a new esterase. A comparison of the amino acid sequence showed that Est19 has typical Ser-Gly-Asn-His (SGNH) family motifs and could be grouped into the SGNH hydrolase family. The Est19 protein was functionally cloned, and expressed and purified from Escherichia coli BL21(DE3). The enzyme activity was optimal at 60℃ and pH 9.0, and displayed esterase activity towards esters with short-chain acyl esters (C₂-C₆). A structural model of Est19 was constructed using phospholipase A1 from Streptomyces albidoflavus NA297 as a template. The structure showed an α/β-hydrolase fold and indicated the presence of the typical catalytic triad Ser49-Asp227-His230, which were further investigated by site-directed mutagenesis. To the best of our knowledge, Est19 is a new member of the SGNH hydrolase family identified from thermophiles, which may be applicable in the industrial production of semisynthetic β-lactam antibiotics after modification.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.1
• /
• pp.160-170
• /
• 2019

The lactic acid bacteria species Lactobacillus plantarum (L. plantarum) has been used extensively for vaccine delivery. Considering to the critical role of dendritic cells in stimulating host immune response, in this study, we constructed a novel CD11c-targeting L. plantarum strain with surface-displayed variable fragments of anti-CD11c, single-chain antibody (scFv-CD11c). The newly designed L. plantarum strain, named 409-aCD11c, could adhere and invade more efficiently to bone marrow-derived DCs (BMDCs) in vitro due to the specific interaction between scFv-CD11c and CD11c located on the surface of BMDCs. After incubation with BMDCs, the 409-aCD11c strain harboring a eukaryotic vector pValac-GFP could lead to more efficient expression of GFP compared with wild-type strains shown by flow cytometry analysis, indicating the enhanced translocation of pValac-GFP from L. plantarum to BMDCs. Similar results were also observed in an in vivo study, which showed that oral administration resulted in efficient expression of GFP in both Peyer's patches (PP) and mesenteric lymph nodes (MLNs) within 7 days after the last administration. In addition, the CD11c-targeting strain significantly promoted the differentiation and maturation of DCs, the differentiation of $IL-4^+$ and $IL-17A^+$ T helper (Th) cells in MLNs, as well as production of $B220^+$ $IgA^+$ B cells in the PP. In conclusion, this study developed a novel DC-targeting L. plantarum strain which could increase the ability to deliver eukaryotic expression plasmid to host cells, indicating a promising approach for vaccine study.

• Journal of Engineering Education Research
• /
• v.19 no.3
• /
• pp.23-34
• /
• 2016

Teaching orientations represent teachers' general way of conceptualizing their teaching. The orientations are regarded as a very important factor in developing teachers' pedagogical content knowledge because they often guide their instructional decisions such as the selection of contents and teaching strategies, the use of curricula materials, and the evaluation of learning. Thus, understanding teachers' orientations can provide meaningful suggestions to understand their instructional approaches and furthermore to enhance the quality of engineering education in college. The research question for this present study was what kinds of teaching orientations engineering professors possessed in teaching engineering courses and how the orientations were represented in their teaching. Six engineering professors, particularly interested in instructional approaches, participated in the research. The data sources included in-depth interviews with individual professors, classroom observations with field notes, and related documents. In results, four teaching orientations toward engineering courses were identified: 1) expert knowledge in engineering, 2) engineering practice, 3) social practice, and 4) interdisciplinary design. Individual professors had between one to three different teaching orientations. Even though the professors had similar orientations but their instructional strategies somewhat varied based on the disciplines.

• Steel and Composite Structures
• /
• v.31 no.1
• /
• pp.1-12
• /
• 2019

Steel-concrete composite walls have been proposed and developed for applications in various types of structures. The double-skin profiled composite walls, as a natural development of composite flooring, provide structural and architectural merits. However, adequate intermediate fasteners between profiled steel plates and concrete core are required to fully mobilize the composite action and to improve the structural behavior of the wall. In this research, two new types of fasteners (i.e., threaded rods and vertical plates) were proposed and three specimens with different fastener types or fastener arrangements were tested under axial compression. The experimental results were evaluated in terms of failure modes, axial load versus axial displacement response, strength index, ductility index, and load-strain relationship. It was found that specimen with symmetrically arranged thread rods sustained more stable axial strain than that with staggered arranged threaded rods. Meanwhile, vertical plates are more suitable for practical use since they provide stronger confinement to profiled steel plate and effectively prevent the steel plate from early local buckling, which eventually enhance the composite action and increase the axial compressive capacity of the wall. The calculation methods were then proposed and good agreement was observed between the test results and the predicted results.

• Journal of Engineering Education Research
• /
• v.19 no.1
• /
• pp.37-46
• /
• 2016

The purposes of the study were to examine engineering students' concerns and problems while they were choosing a project topic in interdisciplinary collaboration and to suggest ways to support them in an early stage of collaboration phase. To answer the research questions, we conducted a case study with engineering participants in GCTI 2015, an interdisciplinary collaborative and creative group project. Multiple data sources including focus group interviews, online survey and researchers' observation notes were used to triangulate research findings. We found four main concerns of engineering students. These concerns include (1) lack of self-efficacy, (2) limited resources, (3) lack of shared, meaningful, and common goals, and (4) lack of content knowledge. Based on these concerns we proposed four supports in an early stage of the collaborative project. These supports includes (1) implementing an orientation program, (2) providing opportunities for social interactions, (3) providing expert feedback, and (4) providing consultation for team building.

• Journal of Engineering Education Research
• /
• v.23 no.6
• /
• pp.60-67
• /
• 2020

This study was conducted to understand the experiences of engineering college professors teaching classes online due to COVID-19. Instructional strategies were proposed based on these results. This study qualitatively analyzed interviews of four engineering college professors who switched from teaching classes offline to teaching them online in the first semester of 2020. The results showed that the professors had difficulties in creating video content, interacting with students, and conducting online assessments. The results also showed that the professors had difficulties in switching to online teaching. This study was significant in that it produced empirical data about online teaching based on the experiences of engineering college professors teaching classes online.