• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.87-94
• /
• 2008

In order to investigate a nitriding process of spent oxide fuel and the subsequent change in thermal properties after nitriding, simulated spent fuel powder was converted into a nitride pellet with simulated fission product elements through a carbothermic reduction process. Nitriding rate of simulated spent fuel was decreased with increasing of the amount of fission products. Contents of Ba and Sr in simulated spent fuel were decreased after the carbothermic reduction process. The thermal conductivity of the nitride pellet was decreased by an addition of fission product element but was higher than that of the oxide fuel containing fission product elements.

• Environmental and Resource Economics Review
• /
• v.25 no.4
• /
• pp.565-590
• /
• 2016

In accordance with the global efforts to reduce greenhouse gas emissions, Korean government submitted its INDC (Intended Nationally Determined Contribution) of 25.7% for domestic reduction and the total of 37% reduction by 2030 including the purchase of emission reduction permit from abroad. In this study, 25.7% reduction target is being evaluated to see its impact on domestic energy system using the integrated assessment model, GCAM (Global Change Assessment Model). Results show that electricity generation from fossil fuel technologies using coal and gas decrease by 28.0%, 13.5% while that of biomass, wind power, solar energy increase by 47.6%, 22.0% and 45.4%, respectively. It is worth noting that so called new technology such as USC (ultra supercritical power generation) does not contribute to achieving the emission reduction target and careful and quantitative analysis is required for such categorization in the future.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.272-279
• /
• 2012

The emission quota of 26.9% was allocated to the architectural sector according to the greenhouse gas(GHG) emission reduction goal of the government. It has become inevitable to change the architectural structures in a low-energy consumption and sustainable manner for new and existing house. The introduction of various legal systems and deregulation have been attempted to promote the low carbon emission and sustainable energy conversion. Although overall emission reduction goal has been set for 6.7 million units of existing houses, there has been a lack of standards and directions for the emission reduction measures. This study was intended to present the most economic and effective green technology improvement measures based on the investigation into the current conditions through direct visit to the selected architectural structures and the repeated simulation of relevant technical elements.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.1
• /
• pp.45-54
• /
• 2009

Reduction reactivity and carbon deposition characteristics of three oxygen carrier particles(OCN01, OCN02, OCN03) have been investigated by using hydrogen, methane, syngas, and natural gas as fuels. For all particles, the maximum conversion, the oxygen transfer capacity, and the degree of carbon deposition increased as the reactive carbon contents increased. The reduction rate and the oxygen transfer rate increased as the moles of required oxygen per input gas increased. The change of maximum conversion, reduction rate, oxygen transfer capacity, oxygen transfer rate and degree of carbon deposition for different fuels can be explained consistently by using parameters such as the reactive carbon contents and the moles of require oxygen per input gas.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.348-358
• /
• 2008

Reduction reactivity and carbon deposition characteristics of mass produced oxygen carrier particle(OCN-650) have been investigated by using hydrogen, methane, syngas, and natural gas as fuels. For all fuels, the maximum conversion and oxygen transfer capacity increased as the temperature increase. The reduction rate and the oxygen transfer rate increased as the temperature increase for methane. However, those values showed maximum at 900$^{\circ}C$ for hydrogen, syngas, and natural gas. To explain consistently the change of maximum conversion, reduction rate, oxygen transfer capacity, oxygen transfer rate and degree of carbon deposition for different fuels, new parameters such as reactive carbon contents and require oxygen per input gas were adopted.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.389-394
• /
• 2015

Direct reduced iron was made using an electric furnace. The reduction ratio of direct reduced iron varied depending on the grade of iron ore. Coal played an important role as a reducing agent in making the direct reduced iron. The coal must contain a suitable amount of volatile components having high calorie values and low impurity content. In this study, oxidized pellets were directly reduced using anthracite as a reductant in an electric furnace. Direct reduction behaviors of hematite and magnetite pellets were confirmed in a coal-based experiment. Reduction behaviors were demonstrated by analyzing the chemical compositions, measuring the reducibility, and observing the phase changes and microstructure. The superior reducibility of hematite pellets can be ascribed to their high effective diffusivity, which is due to their high porosity. The quickly after reducing for 40min and achieves a high value at the end of the reduction.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.1
• /
• pp.57-64
• /
• 2005

The present society have been polluted the earth environment by the rapid industrial growth. So, the meaning of sustainable development is doing more important. Therefore the technology skills of sustainable architecture techniques have been studied many-side of energy as like energy saving and substitutive energy. But, See the studies until now, there have been just one system either energy saving or substitutive energy. So, the paper studies about energy saving system with substitutive energy system(the double-skin facade system with PV modules) and presents the performance of system through the analysis of reduction of the energy load, the solar radiation on the slope angle of PV module, the blind effect in system.

• Korean System Dynamics Review
• /
• v.15 no.2
• /
• pp.27-50
• /
• 2014

Korea government established the energy technology development plan (2011-2020) and declared to be a leader of the green energy technologies. The plan aims for 10% market share in the green energy industry, 12% energy efficiency improvement, and 15% greenhouse gas reduction. In order to achieve these goals, the government has tried to calculate the whole scale of national energy R&D investment, annual budget and specific expenditures for new technologies by computer simulation. The simulation modules include the R&D investment model, GDP model, energy consumption and $CO_2$ emission model by System Dynamics. Based on these simulation modules, I tested various scenarios for effectiveness of energy R&D investments until 2020. The results show that Korea should increase national energy R&D investment to 2.3 billion U.S. dollars, and switch the investment from electricity and nuclear power to the renewable energy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.159-165
• /
• 2017

As increasing the number of the elderly people, various IT-based home systems for the elderly are actively studied. However, while most systems for the elderly focus on systems detecting emergency cases, systems considering energy reduction in the elderly housing are rarely found. In fact, the systems for the elderly housing consumes rather more electric power for their functions. In this paper, a emergency monitoring system including the functions to reduce energy useage is studied and it is implemented. Though the system, we can achieve both of future-oriented functions for the aged and green society, which are emergency monitoring and energy reduction.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.327-334
• /
• 1992

As a promising method for the volume reduction of the low-level liquid waste, the pervaporation process was studied using a cellulose acetate membrane. Experimental results showed that the pervaporation method, usually applied to separation of organic materials, has a good decontamination effect for the volume reduction of liquid waste and the evaporation rate of water in this process was markedly faster than that of natural evaporation method, a wide-used process for the volume reduction of liquid waste. Depending on the feed solution conditions, the pervaporation characteristics were evaluated by the experimental results and the optimum conditions for preparation of the cellulose acetate membrane were established to increase the pervaporation flux through the membrane.