• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.345-353
• /
• 2008

In this paper, a novel loss minimization of an induction generator in wind energy generation systems is presented. The proposed algorithm is based on the flux level reduction, for which the generator d-axis current reference is estimated using support vector regression (SVR). Wind speed is employed as an input of the SVR and the samples of the generator d-axis current reference are used as output to train the SVR algorithm off-line. Data samples for wind speed and d-axis current are collected for the training process, which plots a relation of input and output. The predicted off-line function and the instantaneous wind speed are then used to determine the d-axis current reference. It is shown that the effect of loss minimization is more significant at low wind speed and the loss reduction is about to 40% at 4[m/s] wind speed. The validity of the proposed scheme has been verified by experimental results.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.361-368
• /
• 2002

A new remeshing algorithm based on the energy minimization is proposed for the finite element method. This utilizes the variation of mapping function between the master and global elements. The resultant equations are only the other form of the governing equations. However the equations have an important information about the relations between the elements. By assuming the solutions of the governing equations, these relations are used very usefully for the mesh optimization. The explicit formulations are presented for the relations of 1-dimensional equations and some examples are solved for comparison with the other methods. In addition, 2-dimensional expansion is presented for the general use.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.165-168
• /
• 1996

Though the planar gradient coils, designed by the magnetic energy minimization procedure, have smaller inductance than conventional gradient coils, the planar gradient oils often suffer from their poor magnetic field linearity. Scaling the spatial frequencies of the current density function designed by the magnetic energy minimization procedure, magnetic field linearity of the planar gradient coils can be featly improved with small sacrifice of gradient coil inductance.

• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.220-229
• /
• 2002

In this paper, maximum efficiency operation of two types of permanent magnet synchronous motor drives, namely; surface type permanent magnet synchronous machine (SPMSM) and interior type permanent magnet synchronous motor(IPMSM), are investigated. The efficiency of both drives is maximized by minimizing copper and iron losses. Loss minimization is implemented using flux weakening. A neural network controller (NNC) is designed for each drive, to achieve loss minimization at difffrent speeds and load torque values. Data for training the NNC are obtained through off-line simulations of SPMSM and IPMSM at difffrent operating conditions. Accuracy and fast response of each NNC is proved by applying sudden changes in speed and load and tracking the UC output. The drives'efHciency obtained by flux weakening is compared with the efficiency obtained when setting the d-axis current component to zero, while varying the angle of advance "$\vartheta$" of the PWM inverter supplying the PMSM drive. Equal efficiencies are obtained at diffErent values of $\vartheta$, derived to be function of speed and load torque. A NN is also designed, and trained to vary $\vartheta$ following the derived control law. The accuracy and fast response of the NN controller is also proved.so proved.

• Journal of Computing Science and Engineering
• /
• v.4 no.3
• /
• pp.189-206
• /
• 2010

It is generally accepted that dynamic voltage scaling (DVS) is one of the most effective techniques of energy minimization for real-time applications in embedded system design. The effectiveness comes from the fact that the amount of energy consumption is quadractically proportional to the voltage applied to the processor. The penalty is the execution delay, which is linearly and inversely proportional to the voltage. According to the granularity of tasks to which voltage scaling is applied, the DVS problem is divided into two subproblems: inter-task DVS problem, in which the determination of the voltage is carried out on a task-by-task basis and the voltage assigned to the task is unchanged during the whole execution of the task, and intra-task DVS problem, in which the operating voltage of a task is dynamically adjusted according to the execution behavior to reflect the changes of the required number of cycles to finish the task before the deadline. Frequent voltage transitions may cause an adverse effect on energy minimization due to the increase of the overhead of transition time and energy. In addition, DVS needs to be carefully applied so that the dynamically varying chip temperature should not exceed a certain threshold because a drastic increase of chip temperature is highly likely to cause system function failure. This paper reviews representative works on the theoretical solutions to DVS problems regarding inter-task DVS, intra-task DVS, voltage transition, and thermal-aware DVS.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.5-8
• /
• 2000

This paper introduced a scheme for finding an optimal association matrix that represents the relationships between the measurements and tracks in multi-target tracking of Radar system. We considered the relationships between targets and measurements as MRF and assumed a priori of the associations as a Gibbs distribution. Based on these assumptions, it was possible to reduce the MAP estimate of the association matrix to the energy minimization problem. After then, we defined an energy function over the measurement space, that may incorporate most of the important natural constraints.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.20-28
• /
• 2016

This paper presents a generation rescheduling method for the enhancement of transient stability in power systems. The priority and the candidate generators for rescheduling are calculated by using the energy margin sensitivity. The generation rescheduling formulates the Lagrangian function with the fuel cost and emission such as NO_x and SO_x from power plants. The generation rescheduling searches for the solution that minimizes the Lagrangian function by using the Newton’s approach. While the Pareto optimum in the fuel cost and emission minimization has a drawback of finding a number of non-dominated solutions, the proposed approach can explore the non-inferior solutions of the multiobjective optimization problem more efficiently. The method proposed is applied to a 4-machine 6-bus system to demonstrate its effectiveness.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.372-375
• /
• 1995

The magnetization pattern of the central cross section deduced from the ac susceptibility measurement is described with an analytical function. The function is based on a charge-free configuration. The thickness of the $^{\circ}$ wall lying in a (100) plane and the wall energy are calculated analytically. Total energy of the domain structure has been minimized with Ritz's method. As the result of the minimization, the energy density of the $^{\circ}$ wall lying in a (100) plane is $0.58\;erg/cm^{2}$ and the one for a (110) plane is $1.18\;erg/cm^{2}$. Thicknesses of these walls are calculated numerically. Also, the calculation indicates there is a small central domain at the cross section without applied current. With the ac susceptibility measurement the existence of the domain without current can be identified.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.108-117
• /
• 2009

Leissa claimed in his article that the Rayleigh method is not the same as the Ritz method for determining natural frequencies and its corresponding mode shapes and contended that Rayleigh's name should not be attached to the method. The present article examines the methods in viewpoint of admissible functions and its minimization process, and of the historical developments. It concludes that Leissa's assertion is relevant, although Rayleigh did apply a conceptual theory systematized from the Lagrange method, and given 38 years earlier than Ritz's 'masterly exposition of theory'.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.1
• /
• pp.79-95
• /
• 1993

MARKAL (MARKet ALlocation) Model, one of the most sophisticated energy technology assessment model is applied to finding the optimum mix of energy sources and evaluating energy technology competitiveness in Korea. The model is capable of handling Multiple Objective Linear Programming to test the related cost minimization and environmental control function. In this paper three environmental regulation scenarios are observed including 10% and 20% reduction of carbon dioxide emission level. For the purpose of establishing the basic data base, Korea Reference Engergy System is also developed on the base of the year 1989 with technology utilization and energy flow analysis.