• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2191-2201
• /
• 2000

End effects due to sectional deformations of thin-walled beams with closed cross section are analysed by a one-dimensional theory. In particular, end effects associated with warping (out of plane m otion) and distortion (in plane motion) are investigated. The exact solutions as a vector form are newly derived to reveal slowly-decaying nature of the end effects in a thin-walled beam loaded by a couple. Several examples of thin-walled beams under various loading conditions indicate that the local end effect zone due to warping and distortion is approximately ten times the typical beam width.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.130-139
• /
• 1999

In order to manage the wet end chemistry on paper machines, our goal is to control sub-processes through which we can influence the entire wet end operations with maximum effect. The most important sub-processes are: consistency, ash, and chemistry. The management of these three main groups is based on on-line maesurements and automatic control. This paper presents a new wet end management platform, a new analyzer. This new analyzer utilizes a modular structure and modem software. It is part of a new paper machine concept. The controls of this concept are feedback and feedforward solutions that control retention, consistencies, ash, and charge, resulting in a more stable wet end (30...80%), more uniform paper, and better rnnability.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.46-52
• /
• 2003

End-milling have been used widely in industrial system because it is effective to a material manufacturing with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum surface roughness has an effect on end-milling condition such as, cutting direction spindle speed, feed rate and depth of cut, etc. Therefore this study was carried out to presume for mutual relation of end-milling condition to get the optimum surface roughness by regression analysis. The results shown that coefficient of determination($\textrm{R}^2$) of regression equation has a fine reliability of 87.5% and regression equation of surface rough is made by regression analysis.

• Bulletin of the Korean Chemical Society
• /
• 제3권2호
• /
• pp.44-49
• /
• 1982

Dynamic and equilibrium structures of a polymer chain immersed in solvent molecules have been investigated by a molecular dynamic method. The calculation employs the Lennard-Jones potential function to represent the interactions between two solvent molecules (SS) and between a constituent particle (monomer unit) of the polymer chain and a solvent molecule (CS) as well as between two non-nearest neighbor constituent particles of the polymer chain (CC), while the chemical bond for nearest neighbor constituent particles was chosen to follow a harmonic oscillator potential law. The correlation function for the SS, CS and CC pairs, the end-to-end distance square and the radius of gyration square were calculated by varying the chain length (= 5, 10, 15, 20). The computed end-to-end distance square and the radius of gyration square were found to be in a fairly good agreement with the corresponding results from the random-flight model. Unlike earlier works, the present simulation rsesult shows that the autocorrelation function of radius of gyration square decays slower than that of the end-to-end distance square.

• 아시안잔디학회지
• /
• 제5권1호
• /
• pp.47-53
• /
• 1991

A laboratory experiment was conducted in order to learn the effect of a number of organic matters on the ammonification and nitrification of urea, and the reaction of soil, applied to a loamy upland soil poor in orgnic matter(<1.5%, without plants 1.The ammonification of urea was most pronounced in one week period immediatly after fertilizer and water treated, after which a rapid decrease of it was followed showing no accumulation at the end of 3rd week. Owing to the accumlation of ammonium, pHs of treated soils were read 7.0 to 7.3 from 6.8~6.9. 2.Nitrification was also progressed rapidly in the first one week period so that the accumulation of NO$_3$-N surpassed that of ammonia during this period. After the 1st week the accumulation of N0$_3$-N was continuously increased showing the maximum at the end of 4 weeks following a sharp decrease at the end of 5th weeks. The accumulation of NO$_3$-N dropped soil pH from 6.8-7.0 to 6. 0-6.2,but the decrease of NO-N at the end of 5th weeks brought up soil pH to 6.4-6.6. again. 3.Amino acid fermentation byproduct rich in salt, paticularly chloride, slowed down the ammonification and nitrification of urea. 4.The application of organic matter diminished the acidifying effect of chemical fertilizers. The diminishing effect of soluble humic acid and amion acid fermentation byproduct showed greater than that of solid organic matter in this experiment, which might be own to the application of a rather small amount of water soluble organic matters. Rice straw powder among solid organic matters appeared to be the least in the diminishing effect above. It may be reasoned that these soluble organic matters decomposes rapidly so as to affect Soil pH, but solid organic matters, particularly the rice straw powder, form acidic humus.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.44-47
• /
• 1989

In this paper, We analyzed the End Effect of Single-sided Linear Induction Motor by combination of Finite Element Method in Active region and 0- 1 order Boundary Element Method in Entry, Exit region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.41-43
• /
• 1993

This paper is proposed a method that optimizes teeth shape of Linear induction motor for high efficiency and slot shape for static end effect minimization in linear induction motor. As a result, unbalance current of each phase in minimized.

• 전기의세계
• /
• 제21권4호
• /
• pp.7-14
• /
• 1972

The author has established a general equation for the travelling magnetic field in air gap with the end effect taken into consideration, which constitutes the basics for the analysis of characteristics of linear induction motor. This equation is verified by comparison of the experimental values with the theoretically calculated values. The properties of the travelling wave with attenuation, which is contained in the travelling magnetic field of linear induction motor, have been verified, and consequently the practicable equation is established with these effects taken into consideration. This provides the solid foundation for the theoretical analysis of the characteristics of the linear induction motor.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.135-143
• /
• 2004

해상교량건설 현장의 육상구간에서 예기치 않게 발견된 단층파쇄대에 시공된 대구경 현장타설말뚝의 선단지지력을 확인하기 위하여 양방향 선단재하시험을 실시하였다. 본 연구의 목적은 단층파쇄대에 시공된 대구경 현장타설말뚝에 재하시험을 실시하여 단층파쇄대에서의 선단지지력을 확인하고, 그 후 말뚝 선단 하부지반에 보강 그라우팅을 실시하여 선단보강에 의한 선단지지력 증가효과를 확인하는 것이다. 선단보강 그라우팅 후 선단지지력은 2배 이상 증가하였으며 보강전 보다 선단의 침하량이 현저하게 줄어드는 것을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.105-116
• /
• 2003

The flow structure around the free end of a finite circular cylinder (FC) embedded in an atmospheric boundary layer (ABL) over open terrain was investigated experimentally with varying the free end shape. The experiments were carried out in a closed-return type subsonic wind tunnel. A finite cylinder with an aspect ratio (L/D) of 6 was mounted vertically on a long flat plate. The Reynolds number based on the cylinder diameter is about Re=7,500. The velocity fields near the FC free end were measured using the single-frame double-exposure PIV method. As a result, for the FC with a right-angled free end, there is a peculiar vortical structure, showing counter-rotating twin vortices near the FC free end. It is caused by the interaction between the entrained irrotational fluids from both sides of FC and the downwash flow from the FC free-end.