Presumption for Mutual Relation of the End-Milling Condition on Surface Roughness of Al Alloy by Regression Analysis

회귀분석을 이용한 Al 합금의 표면거칠기에 미치는 엔드밀 가공조건의 상관관계 추정

  • 이상재 (동아대학교 기계산업시스템공학부 대학원) ;
  • 배효준 (동아대학교 기계산업시스템공학부 대학원) ;
  • 박흥식 (동아대학교 기계산업시스템공학부) ;
  • 전태옥 (동아대학교 기계산업시스템공학부)
  • Published : 2003.10.01

Abstract

End-milling have been used widely in industrial system because it is effective to a material manufacturing with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum surface roughness has an effect on end-milling condition such as, cutting direction spindle speed, feed rate and depth of cut, etc. Therefore this study was carried out to presume for mutual relation of end-milling condition to get the optimum surface roughness by regression analysis. The results shown that coefficient of determination($\textrm{R}^2$) of regression equation has a fine reliability of 87.5% and regression equation of surface rough is made by regression analysis.

Keywords

References

  1. Trans. of JSME v.21 no.153 Study on Deep Hole Drilling with Solid Boring Tools, The Effect of Tool Material on the Cutting Performance Sakuma,K.;Taguchi,K.;Kinjo,S. https://doi.org/10.1299/jsme1958.21.532
  2. Trans. of KSMTE v.10 no.1 Detection of Tool Wear Using Force Measurment in Turning Youn,J.W.;Lee,K.Y.;Lee,S.C.;Choi,J.G.
  3. Annals of CIRP v.40 no.Jan. An Atomistic Analysis of Nanometric Chip Removal as Affected by Tool-work Interaction in Diamond Turning Ikawa,N.;Shimada,S.;Tanaka,H.;Ohmori,G. https://doi.org/10.1016/S0007-8506(07)62051-4
  4. ASME Trans. v.9 Chip Breaking - A Study of Three Dimensional Chop Flow Henriksen,E.K.
  5. ASME Trans. v.101 On the Mechanism of Chip Breaking Kaldor,S.;Ber,A.;Lenz,E. https://doi.org/10.1115/1.3439503
  6. J. of JSPE v.30 no.4 High-Speed Spindles for Mchine Tools Nakamura,S.
  7. Proceedings of the 31st Int. MATADOR Conf High Speed Machining Cutting Tools and Machine Requirement Dewes,R.C.;Apinwall,D.K.;Wise,M.L.H.
  8. Applied Regression Analysis Draper,N.R.;Smith,H.
  9. Linear Regression Analysis Seber,G.A.F.
  10. Selected Tables in Mathematical Studies, AMSP, R. I. v.11 Percentage Points of Multivariate Student t Distributions Bechhofer,R.E.;Dunnett,C.W.
  11. J. of ASA v.69 Order Statistics and Their Uses in Testing and Estimation Brown,M.B.;Forsythe,A.B.
  12. Order Statistics and Their Uses in Testing and Estimation v.1 Harter,H.L.
  13. Annals of Statistics v.12 A Proof of the Conjecture that the Tukey-Kramer Comparisons Procedure is Conservative Hayter,A.J. https://doi.org/10.1214/aos/1176346392
  14. Modern design of experiment Park,S.H.