Browse > Article

Presumption for Mutual Relation of the End-Milling Condition on Surface Roughness of Al Alloy by Regression Analysis  

이상재 (동아대학교 기계산업시스템공학부 대학원)
배효준 (동아대학교 기계산업시스템공학부 대학원)
박흥식 (동아대학교 기계산업시스템공학부)
전태옥 (동아대학교 기계산업시스템공학부)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.12, no.5, 2003 , pp. 46-52 More about this Journal
Abstract
End-milling have been used widely in industrial system because it is effective to a material manufacturing with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum surface roughness has an effect on end-milling condition such as, cutting direction spindle speed, feed rate and depth of cut, etc. Therefore this study was carried out to presume for mutual relation of end-milling condition to get the optimum surface roughness by regression analysis. The results shown that coefficient of determination($\textrm{R}^2$) of regression equation has a fine reliability of 87.5% and regression equation of surface rough is made by regression analysis.
Keywords
End-Milling; Surface Roughness; Analysis of Variation; Regression Analysis; Feed Rate;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 An Atomistic Analysis of Nanometric Chip Removal as Affected by Tool-work Interaction in Diamond Turning /
[ Ikawa,N.;Shimada,S.;Tanaka,H.;Ohmori,G. ] / Annals of CIRP   DOI
2 /
[ Park,S.H. ] / Modern design of experiment
3 A Proof of the Conjecture that the Tukey-Kramer Comparisons Procedure is Conservative /
[ Hayter,A.J. ] / Annals of Statistics   DOI   ScienceOn
4 High-Speed Spindles for Mchine Tools /
[ Nakamura,S. ] / J. of JSPE
5 Order Statistics and Their Uses in Testing and Estimation /
[ Brown,M.B.;Forsythe,A.B. ] / J. of ASA
6 /
[ Draper,N.R.;Smith,H. ] / Applied Regression Analysis
7 High Speed Machining Cutting Tools and Machine Requirement /
[ Dewes,R.C.;Apinwall,D.K.;Wise,M.L.H. ] / Proceedings of the 31st Int. MATADOR Conf
8 /
[ Seber,G.A.F. ] / Linear Regression Analysis
9 Chip Breaking - A Study of Three Dimensional Chop Flow /
[ Henriksen,E.K. ] / ASME Trans.
10 Detection of Tool Wear Using Force Measurment in Turning /
[ Youn,J.W.;Lee,K.Y.;Lee,S.C.;Choi,J.G. ] / Trans. of KSMTE   과학기술학회마을
11 Percentage Points of Multivariate Student t Distributions /
[ Bechhofer,R.E.;Dunnett,C.W. ] / Selected Tables in Mathematical Studies, AMSP, R. I.
12 Study on Deep Hole Drilling with Solid Boring Tools, The Effect of Tool Material on the Cutting Performance /
[ Sakuma,K.;Taguchi,K.;Kinjo,S. ] / Trans. of JSME   DOI
13 On the Mechanism of Chip Breaking /
[ Kaldor,S.;Ber,A.;Lenz,E. ] / ASME Trans.   DOI
14 /
[ Harter,H.L. ] / Order Statistics and Their Uses in Testing and Estimation