• 환경생물
• /
• 제35권4호
• /
• pp.515-520
• /
• 2017

Sexual dimorphism of the mouthpart, antenna and mandible of the Cyllorhynchites ursulus in South Korea was studied with linear measurements. The mouthpart and antenna measurements were conducted with a stereoscopic microscope using 122 specimens (72 males and 50 females). Microscopic observation of the mandible were conducted with a Field Emission Scanning Electron Microscope (FE-SEM) using 103 specimens (73 males and 30 females). Results showed that the size difference between males and females was significant in the size of the mouthpart and antenna. On the other hand, we could not detect sexual size dimorphism in the microstructure of the mandible. The bivariate plots made by the result of Principal Component Analysis (PCA) and Discriminant Analysis (DA) showed a size dimorphism in the size of the mouthpart and the antenna between males and females. Based on our study, sexual dimorphism in the mouthpart and antenna exists in C. ursulus from the South Korean population, and this difference seems to be related to the behavioral differences between males and females.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.348-352
• /
• 2022

Resistive switching behaviors of a co-sputtered zinc silicate thin film (ZnO and SiO₂ targets) have been investigated. We fabricated an Ag/ZnSiO_x/highly doped n-type Si substrate device by using an RF magnetron sputter system. X-ray diffraction pattern (XRD) indicated that the Zn₂SiO₄ was formed by a post annealing process. A unique morphology was observed by scanning electron microscope (SEM) and atomic force microscope (AFM). As a result of annealing process, 50 nm sized nano clusters were formed spontaneously in 200~300 nm sized grains. The device showed a unipolar resistive switching process. The average value of the ratio of the resistance change between the high resistance state (HRS) and the low resistance state (LRS) was about 106 when the readout voltage (0.5 V) was achieved. Resistance ratio is not degraded during 50 switching cycles. The conduction mechanisms were explained by using Ohmic conduction for the LRS and Schottky emission for the HRS.

• 한국표면공학회지
• /
• 제57권3호
• /
• pp.179-191
• /
• 2024

This study focuses on improving the photocatalytic degradation efficiency by synthesizing a TiO₂/WO₃ composite. Given the environmental significance of photocatalysis and the limitations posed by TiO₂'s large bandgap and high electron recombination rate, we explored doping, surface modification, and synthesis strategies. The composite was created using a ball mill process and heat treatment, analyzed with field emission scanning electron microscope, high resolution X-ray diffraction, Raman microscope, and UV-Vis/NIR spectrometer to examine its morphology, composition and absorbance. We found that incorporating WO₃ into the TiO₂ lattice forms a W_x-Ti_1-x-O₂ solution, with optimal WO₃ content reducing the band gap and enhancing sterilization efficiency by inhibiting the anatasese to rutile transition. This contributes to the field by offering a way to overcome TiO₂'s limitations and improve photocatalytic performance.

• 한국결정성장학회지
• /
• 제13권5호
• /
• pp.217-221
• /
• 2003

본 연구에서는 섬유의 표면 거칠기를 조사하기 위하여 tetraethyl orthosilicate, 에탄올, 증류수 및 염산의 혼합 용액을 이용하여 실리케이트 섬유를 제조하였다. $80^{\circ}C$에서 증발시킨 점성용액으로부터 섬유를 인상하여 제조하였으며, 건조된 겔 섬유는 건조공기를 흘려보내며(flow rate = ∼200 m1/min) $1000^{\circ}C$, $1100^{\circ}C$, $1200^{\circ}C$ 및 $1300^{\circ}C$로 60분간 최종열처리를 행하였다 열처리된 섬유의 결정화도는 X-선 회절 $\theta$-2$\theta$ 분석을 통하여 행하였으며, 표면 특성을 조사하기 위하여 전계 방사 주사 전자현미경과 원자간력 현미경을 이용하였다. $1300^{\circ}C$로 열처리된 실리케이트 섬유는 높은 root mean square 거칠기 값을 보였으며, 비교적 불균질한 표면 구조를 가지고 있었다.

• 비파괴검사학회지
• /
• 제18권4호
• /
• pp.278-291
• /
• 1998

연속섬유강화 복합재료의 경우 보강섬유의 파괴, 모재의 파괴, 섬유와 모재의 분리, 층간파괴 등의 복합적인 파괴현상이 동반되고 특히 균열성장과 균열성장 정지가 균열가교 현상 때문에 반복되므로 안정성장과 불안정성장이 불규칙하게 반복된다. 따라서 주균열 성장의 개시점과 불안정 파괴점에서의 파괴인성치를 정확하게 결정한다는 것은 매우 어려운 것이다. 본 연구에서는 CFRP에 대하여 파괴인성 실험과 병행하여 실시간으로 결함을 검출하는 새로운 방법인 AE분석법 및 비디오 마이크로 스코프를 이용하여 파괴과정을 기록하여 검토, 분석함으로서 손상의 정도와 파괴기구를 규명하였을 뿐만 아니라 주균열 성장의 개시점, 균열가교 역할을 하는 섬유다발의 파단점, 균열의 불안정 파괴 개시점을 찾아 이를 기초로 균열진전 저항곡선에 의한 파괴인성치를 평가하여 신뢰성 있는 파괴인성 측정법을 제시하였다.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.202-208
• /
• 2015

Alumina dispersion strengthening copper(ADSC) alloy has great potential for use in many industrial applications such as contact supports, frictional break parts, electrode materials for lead wires, and spot welding with relatively high strength and good conductivity. In this study, we investigated the oxidation behavior of ADSC alloys. These alloys were fabricated in forms of plate and round type samples by surface oxidation reaction using Cu-0.8Al, Cu-0.4Al-0.4Ti, and Cu-0.6Al-0.4Ti(wt%) alloys. The alloys were oxidized at $980^{\circ}C$ for 1 h, 2 h, and 4 h in ambient atmosphere. The microstructure was observed with an optical microscope(OM) and a scanning electron microscope(SEM) equipped with energy-dispersive X-ray spectroscopy(EDS). Characterization of alumina was carried out using a 200 kV field-emission transmission electron microscope(TEM). As a result, various oxides including Ti were formed in the oxidation layer, in addition to ${\gamma}$-alumina. The thickness of the oxidation layer increased with Ti addition to the Cu-Al alloy and with the oxidation time. The corrected diffusion equation for the plate and round type samples showed different oxidation layer thickness under the same conditions. Diffusion length of the round type specimen had a value higher than that of its plate counterpart because the oxygen concentration per unit area of the round type specimen was higher than that of the plate type specimen at the same diffusion depth.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.463-467
• /
• 2007

[ $Al_2O_3$ ]기판을 산소 plasma 또는 수소 plasma로 표면 처리한 후 그 위에 plasma-assisted molecular beam epitaxy 방법으로 성장된 ZnO 박막의 구조적 특성과 광학적 발광 특성을 체계적으로 조사하였다. 제작된 ZnO 박막은 high resolution X-ray diffraction 측정과 atomic force microscope를 사용하여 구조적 특성과 표면 특성을 관찰하였으며, photoluminescence (PL) 측정을 통하여 엑시톤과 관련된 광학적 전이특성을 온도에 따라 조사하였다. free exciton, bound exciton, 그리고 이들의 phonon replica들의 특성을 온도에 따라 분석하였으며, 산소 plasma로 표면 처리한 시료의 PL 세기가 수소 plasma 표면 처리한 시료의 PL 세기보다 상당히 커짐을 관찰하였다. 산소 plasma로 처리된 기판 위에 성장된 ZnO 시료가 수소 plasma로 처리된 경우보다 우수한 구조적 특성과 광학적 특성을 보였는데, 이는 산소 plasma로 표면 처리함으로써 산소 공공(oxygen vacancy)과 같은 결함 구조가 적게 생성되고 좋은 격자 상수 일치를 보여주므로 구조적 특징과 발광 특징이 향상되는 것으로 해석되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.352.2-352.2
• /
• 2016

In recent times, much effort has been concentrated on trivalent rare-earth ions activated ceramics or oxide phosphors to develop display industries due to their promising applications in optoelectronic devices and field-emission displays. To prepare efficient phosphors, citrate sol-gel method is one of the best synthetic methods. Green and blue emissive CaLa2ZnO5:RE3+ nanocrystalline materials are synthesized by a citrate sol-gel method. After the samples annealing at $1100^{\circ}C$, morphological and structural properties are investigated by scanning electron microscope images and X-ray diffraction patterns, respectively. At low electron beam voltage of <5 kV, the visible photoluminescence properties are obtained. Various concentrations of the RE3+ ions exhibited their characteristic emission peaks at different excitation wavelengths, respectively. Similarly, at high electron beam anodic voltage, the cathodoluminescence properties are studied as a function of acceleration voltage and filament current. The chromaticity coordinates are calculated for the optimized CaLa2ZnO5 nanocrystalline luminescent materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.74-77
• /
• 2002

Ferroelectric Random Access Memory(FRAM) and MEMS applications require noble metal or refractory metal oxide electrodes. In this study, Ru thin films were etched using $O_2$+10% $CF_4$ plasma in an inductively coupled plasma(ICP) etching system. The etch rate of Ru thin films was examined as function of rf power, DC bias applied to the substrate. The enhanced etch rate can be obtained not only with increasing rf power and DC bias voltage, but also with small addition $CF_4$ gas. The selectivity of $SiO_2$ over Ru are 1.3. Radical densities of oxygen and fluorine in $CF_4/O_2$ plasma have been investigated by optical emission spectroscopy(OES). The etching profiles of Ru films with an photoresist pattern were measured by a field emission scanning electron microscope (FE-SEM). The additive gas increases the concentration of oxygen radicals, therefore increases the etch rate of the Ru thin films and enhances the etch slope. In $O_2$+10% $CF_4$ plasma, the etch rate of Ru thin films increases up to 10% $CF_4$ but decreases with increasing $CF_4$ mixing ratio.

• Applied Microscopy
• /
• 제47권1호
• /
• pp.36-42
• /
• 2017

Field electron emission measurements were performed on dielectric-coated tungsten emitters, with apex radii in the nanometer and micrometer range, which were prepared by electrochemical etching in NaOH solution. Measurements were performed in a field electron microscopy (FEM) with a base pressure <$10^{-6}$ Pascal ($10^{-8}$ mbar). Four different types of dielectric were used, namely: (1) Clark Electromedical Instruments epoxylite resin, (2) Epidian 6 produced by Ciech Sarzyna S. A., (3) a Radionox solution of colloidal graphite; and (4) Molyslip 2001 E compound ($MoS_2$ and MoS). Current-voltage measurements and FEM images were used to investigate the characteristics of these composite emitters, and to assess how the different types of dielectric coating affect the suitability of the composite emitter as a potential electron source.