• 한국재료학회지
• /
• 제19권5호
• /
• pp.240-244
• /
• 2009

Simple and high efficiency green phosphorescent devices using an intermixed double host of 4, 4', 4"-tris(N-carbazolyl) triphenylamine [TCTA], 1, 3, 5-tris (N-phenylbenzimiazole-2-yl) benzene [TPBI], phosphorescent dye of tris(2-phenylpyridine)iridium(III) [$Ir(ppy)_3$], and selective doping in the TPBI region were fabricated, and their electro luminescent characteristics were evaluated. In the device fabrication, layers of $70{\AA}$-TCTA/$90{\AA}$-$TCTA_[0.5}TPBI_{0.5}$/$90{\AA}$-TPBI doped with $Ir(ppy)_3$ of 8% and an undoped layer of $50{\AA}$-TPBI were successively deposited to form an emission region, and SFC137 [proprietary electron transporting material] with three different thicknesses of $300{\AA}$, $500{\AA}$, and $700{\AA}$ were used as an electron transport layer. The device with $500{\AA}$-SFC137 showed the luminance of $48,300\;cd/m^2$ at an applied voltage of 10 V, and a maximum current efficiency of 57 cd/A under a luminance of $230\;cd/m^2$. The peak wavelength in the electroluminescent spectral and color coordinates on the Commission Internationale de I'Eclairage [CIE] chart were 512 nm and (0.31, 0.62), respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.658-658
• /
• 2013

Graphene is an attractive material for various device applications due to great electrical properties and chemical properties. However, lack of band gap is significant hurdle of graphene for future electrical device applications. In the past few years, several methods have been attempted to open and tune a band gap of graphene. For example, researchers try to fabricate graphene nanoribbon (GNR) using various templates or unzip the carbon nanotubes itself. However, these methods generate small driving currents or transconductances because of the large amount of scattering source at edge of GNRs. At 2009, Bai et al. introduced graphene nanomesh (GNM) structures which can open the band gap of large area graphene at room temperature with high current. However, this method is complex and only small area is possible. For practical applications, it needs more simple and large scale process. Herein, we introduce a photosensitive graphene device fabrication using CdSe QD coated nano-porous graphene (NPG). In our experiment, NPG was fabricated by thin film anodic aluminum oxide (AAO) film as an etching mask. First of all, we transfer the AAO on the graphene. And then, we etch the graphene using O2 reactive ion etching (RIE). Finally, we fabricate graphene device thorough photolithography process. We can control the length of NPG neckwidth from AAO pore widening time and RIE etching time. And we can increase size of NPG as large as 2 $cm^2$. Thin CdSe QD layer was deposited by spin coatingprocess. We carried out NPG structure by using field emission scanning electron microscopy (FE-SEM). And device measurements were done by Keithley 4200 SCS with 532 nm laser beam (5 mW) irradiation.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제9권5호
• /
• pp.153-160
• /
• 2020

산업용 에너지 소비 예측은 에너지 수요와 공급에 동적이고 계절적인 변화가 있기 때문에 에너지 관리 및 제어 시스템에서 중요한 위치를 차지한다. 본 논문은 철강 산업의 에너지 소비 예측 모델을 제시하고 논의한다. 사용되는 데이터에는 후행 및 선도적인 전류 반응 전력, 후행 및 선도적인 전류 동력 계수, 이산화탄소(TCO2) 배출 및 부하 유형이 포함된다. 테스트 세트에서는 (a) 선형 회귀(LR), (b) 방사형 커널(SVM RBF), (c) Gradient Boosting Machine (GBM), (d) 무작위 포리스트(RF). 평균 제곱 오차(RMSE), 평균 절대 오차(MAE) 및 평균 절대 백분율 오차(ME)의 네 가지 통계 모델을 사용하여 예측하고 평가한다. 회귀 설계의 효율성 모든 예측 변수를 사용할 때 최상의 모델 RF는 테스트 세트에서 RMSE 값 7.33을 제공할 수 있다.

• 항공우주시스템공학회지
• /
• 제14권spc호
• /
• pp.7-12
• /
• 2020

본 논문에서는 항공기 인증 절차에 포함되는 형식증명을 위한 항공기 기술기준의 새로운 정립에 대한 개정안을 제안하였다. 기존 항공기 엔진의 연료 및 배기가스 배출기준(Part 34)은 관리 대상 항목을 매연과 불연소탄화수소(HC), 일산화탄소(CO) 그리고 질소산화물(NOx)로 한정하고 있다. 하지만 이 항목들은 최근 기후변화에 따른 국제민간항공(ICAO)의 항공기 탄소배출 제한, 미국환경보호청(EPA)의 항공기 배기가스 규제 추진 등 환경규제가 강화되고 있는 시대 흐름을 담아내지 못하고 있다. 따라서 본 논문에서는 이러한 한계점을 현대화된 국제기준에 맞도록 보완하기 위해서 미국, 유럽 등의 배출기준을 근거로 항공기 배출가스에 대한 기술기준을 새롭게 제안하였다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.648-658
• /
• 1998

본 논문에서는 PCB (printed circuit board) 접지면에 셜치된 캡(gap)이 불요전자파 방사에 미치는 영향을 정 량적으로 해석하였다. 본 연구의 해석법으로 복잡한 구조체의 전자기적 특성을 해석하는데 주파수영역 전자파 수치해석 방법들과 비교하여 여러 가지 장점올 가지는 시간영역 해석법인 FDTD(finite difference time dom main) 방법올 사용하였다. 해석 구조체는 일반적으로 생산되는 PCB와 유사한 크기를 선정하였으며 소자충은 전압원과 마이크로스트립만이 폰재하는 단순화된 구조이다. PCB 접지변에 설치된 캡에 의해 생기는 인덕턴스 의 크기와 입출력 케이블올 통한 불요전자파 방사량을 FCC 및 CISPR 규정치와 함께 제시하였으며 갱의 크기 에 따라 방사되는 불요전자파의 세기가 크게 변화되는 것을 관찰할 수 있다. 본 논문의 해석결과는 실제 PCB 셜 계에 있어서 잘봇된 캡의 설치로 인한 불요전자파 방사를 막는데 유용하게 사용될 수 있으리라 생각된다.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.807-811
• /
• 2003

We investigated the electrical characterisitics of T $a_2$ $O_{5}$ (tantalum pentoxide) film and Ti-O/T $a_2$ $O_{5}$ film deposited on $Al_2$ $O_3$based substrate. Ta (tantalum) electrode and $Al_2$ $O_3$ substrate was used for the purpose of simplifying the manufacturing process in IPD's (integrated passive devices). Dielectric materials (T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ films) deposited on Ta/Ti/A $l_2$ $O_3$ were annealed at 700 $^{\circ}C$ for 60 sec. in vacuum. The XRD results showed that as-deposited T $a_2$ $O_{5}$ film possessed amorphous structure, which was transformed to crystallines by rapid thermal heat treatment. We compared the lnJ- $E^{{\frac}{1}{2}}$, C-V, C-F of both as-deposited and annealed dielectric thin films deposited on Ta bottom electrode. From this results, we concluded that the leakage current could be reduced by introducing Ti-O buffer layer and conduction mechanisms of T $a_2$ $O_{5}$ and Ti-O/T $a_2$ $O_{5}$ could be interpreted appropriately by Schottky emission effect.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.340-344
• /
• 2008

The importance of the more efficient cogeneration system is emphasized. Also the more clean energy is needed at recent energy system. The cogeneration system using Lean burn engine is more preferred to the system using Rich burn engine because of the electrical efficiency. Although the cogeneration system using Lean burn engine is economically preferred, because of the NOx emission level, the system using Rich burn engine with 3-way catalyst can only be used in Korea. The NOx regulation level is 50ppm at oxygen level 13%. The cogeneration hybrid system using Lean burn engine is up to be optimized because of the large amount of the extra-fuel at the after-burner system. The after-burner system at different concept was applied. The reduction time for the activation temperature of the DeNOx catalyst was achieved by making a hole between the combustor and boiler. Because of the lowered fuel consumption, the lowered temperature level was optimized by blocking the hole of the boiler The optimized cogeneration hybrid system consumes $76Nm^3/h$ LNG to produce 150kW electricity compared to before optimization $103Nm^3/h$ LNG. The system was accurately evaluated and the result is following ; 90% total efficiency, below 10 ppm NOx, 50ppm CO, 25ppm HC. The cogeneration hybrid system can meet the current NOx level and exhaust gas regulation. It can achieve the clean combustion gas and efficient cogeneration system.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.541-547
• /
• 2015

현재 반도체 제조 공정에서 집적회로의 소자 크기가 점점 작아짐에 따라 플라즈마 식각 공정에서의 식각 종료점 검출이 더 어려워지고 있다. 식각 종료점 검출은 위해서는 반도체 장비에 다양한 종류의 센서를 설치하고 이 센서를 통해 데이터를 얻고 분석해야 한다. 기존의 식각 종료점 검출 방식은 주로 By-product의 OES 데이터를 분석하여 진행되었는데 본 연구에서는 By-product 와 Etchant gas 의 OES 데이터를 함께 분석하여 식각 종료점 검출 결과에 신뢰성을 더 높이고자 하였다. 또한, 데이터 분석을 위해 OES-SNR, PCA, Polynomial Regression, eHMM 등의 기법들을 사용하여 진행하였다.

• 천문학논총
• /
• 제30권2호
• /
• pp.61-64
• /
• 2015

The brightness of Io's magnetic footprint, an indicator of electromagnetic interaction at the satellite, appears to be strongly connected to the satellite's distance from the plasma equator. As a result, the brightest footprints were detected when Io is near the interception location between the satellite's orbital plane and the plasma equator. However, volcanic activities on Io show strong correlation with the equatorward shift of Jupiter's main auroral oval, consequently causing the disappearance of Io's footprint. The same conclusion was suggested via the observation of Jupiter's hectometric radio emission, called HOM, which closely corresponds to Jupiter's auroral activity. The plasma environment near the Jovian satellites was found to vary significantly at different observational epochs. The electron density increased by approximately a factor of three from the Voyager epoch (1979) to the Galileo epoch (1995), while the electron density was found to be significantly higher (~ 5 times) in the Cassini epoch (2001). In this current study, the magnetic footprints were clearly brighter ten years ago (from peak brightness in 1998-2001) than the footprints detected in 2007. For volcanic activities on Io in 2007, there are two clear activities in February and late May. The magnetic footprint appeared to be dimmer in March 2007, expected to be the result of volcano activities in Feb 2007. However, the magnetic footprint brightness in June appeared to be slightly brighter than the footprints observed in May. The reason could be the time delay between the brightening of the sodium nebula on approximately May 31st and, a while later, the enhancement of flux tube content peaking on approximately June 5th. On the other hand, Io's magnetic footprints were observed during June 1st - 10th when they may not yet have been affected by the increase in mass outflow due to the increase of plasma density.

• 한국재료학회지
• /
• 제20권1호
• /
• pp.19-24
• /
• 2010

The current study examined Ag migration from the Ag paste bump in the SABiT technology-applied PCB. A series of experiments were performed to measure the existence/non-existence of Ag in the insulating prepreg region. The average grain size of Ag paste was 30 nm according to X-ray diffraction (XRD) measurement. Conventional XRD showed limitations in finding a small amount of Ag in the prepreg region. The surface morphology and cross section view in the Cu line-Ag paste bump-Cu line structure were observed using a field emission scanning electron microscope (FE-SEM). The amount of Ag as a function of distance from the edge of Ag paste bump was obtained by FE-SEM with energy dispersive spectroscopy (EDS). We used an electron probe micro analyzer (EPMA) to improve the detecting resolution of Ag content and achieved the Ag distribution function as a function of the distance from the edge of the Ag paste bump. The same method with EPMA was applied for Cu filled via instead of Ag paste bump. We compared the distribution function of Ag and Cu, obtained from EPMA, and concluded that there was no considerable Ag migration effect for the SABiT technology-applied printed circuit board (PCB).