• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.929-935
• /
• 2008

As internet telephony services based on Session initiation Protocol (SIP) enter the spotlight as marketable technology, many products based on SIPs have been developed and utilized for home and office telephony services. The call connection of an internet phone is classified into specific call connections and group call connections. Group call connections have a forking function which delivers the message to all of the group members. This function requires excessive message control for a call connection and creates heavy traffic in the network. In the internet cail system model. most of the call-setup messages are directed to the proxy server during a short time period. This heavy message load brings an unwanted delay in message processing and. as a result, call setup can not be made. To solve the delay problem, we simplified the analysis of the call-setup message in the proxy server, and processed the forking function distributed for the group call-setup message. In this thesis, a new system model to minimize the load is proposed and the subsequent implementation of this model demonstrates the performance improvement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.709-714
• /
• 2017

Structures like bridges or buildings need to be checked continuously to diagnose their safety. However, it is extremely difficult for the people who access such structures to check all areas directly. To overcome this problem, there is a lot of active research into structural health monitoring (SHM) with wireless sensor nodes (WSNs). In this paper, for more accurate checking of SHM with WSNs, we experimentally compare and evaluate the performance of Xenomai, which provides real-time processing under the traditional Linux kernel. For this purpose, we patch Xenomai into the traditional Linux kernel of a commercial embedded board, Raspberry Pi, and implement a task that periodically reads vibration data of the z-axis from an accelerometer in order to analyze the natural frequency of cantilever beams. Reading the data from the traditional Linux kernel with the same method, we analyze the natural frequency of the cantilever beams using Smart Office Analyzer. Finally, to review the validity of Xenomai for WSNs, we obtain vibration data on the z-axis from the accelerometer via wired network and compared and analyzed them the same way.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.757-766
• /
• 2005

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6T Full CMOS SRAM had been continued as the technology advances, However, conventional 6T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6T Full CMOS SRAM is $70{\sim}90F^{2}$, which is too large compared to $8{\sim}9F^{2}$ of DRAM cell. With 80nm design rule using 193nm ArF lithography, the maximum density is 72M bits at the most. Therefore, pseudo SRAM or 1T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed $S^{3}$ cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^{3}$ SRAM cell technology with 100nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.180-190
• /
• 2008

There have been researches into digital Watermarking technology or Fingerprinting vigorously to safeguard Protective rights for knowledge and poverty for digital contents. DRM(Digital Rights Management) is not only Protective rights for knowledge and poverty, but also management and systems that are necessary to put out, circulate and use for contents. This paper proposes two kinds of ideas. One is protecting contents from illegal acts such as illegal copies when the contents are in the process of circulation. The other is the protocol that can give users convenience. Hidden Agents are used so that contents are protected from illegal copies and illegal use in the contents and cuts off those illegal acts. The Agent will be installed without any special setup. In addition, it can replace roles of Watermarking as a protection. Therefore, this paper shows the solution of illegal copies that happens frequently.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.314-321
• /
• 2006

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6 T Full CMOS SRAM had been continued as the technology advances. However, conventional 6 T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6 T Full CMOS SRAM is $70{\sim}90\;F^2$, which is too large compared to $8{\sim}9\;F^2$ of DRAM cell. With 80 nm design rule using 193 nm ArF lithography, the maximum density is 72 Mbits at the most. Therefore, pseudo SRAM or 1 T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64 M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6 T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed S3 cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^3$ SRAM cell technology with 100 nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.459-472
• /
• 2006

This paper examines the implication of competition and collaboration in the innovation process for regional economic development in an increasingly knowledge-based economy. While competition is an important force in securing the competitive advantage of firms, collaboration between firms and organizations should be necessary for promoting the innovative capacity of a region. This study shows that collaboration relations based on trust and stability is important for the long-term development of learning and innovation in competitive environment, and the way how spatial proximity plays an important role in interactive learning processes. It also discusses the reason why the innovative networks facilitating the exchange of tacit knowledge should be embedded in region. Finally, the paper examines the possibility of the networks based on collaboration relationship in less-favored regions such as Chonbuk, and suggests the policy implication of the result for achieving regional innovation systems in the region successfully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.842-855
• /
• 2014

Recently, the progress of smart phone market has retarded by oversupply therefore wearable computer has been the focus of new growth engine. Wearable computing system is a complex fusion of a variety of technologies such as wireless network, embedded, sensor and new material. Because these technologies involves utilization and mobility in addition to quality characteristic in existing software, application of ISO/IEC 9126 is not perfect when assessing quality of wearable computer. In this study, author suggested new quality assessment model for wearable computer by sorting quality attribute in ISO/IEC 9126 and adding new quality attribute. For this, author investigated features and functional requirements related to wearable computer. and then author suggested quality standard and metrics by identifying quality characteristic. Author confirmed practicality of quality assessment model by using suggested model in scenario and comparing quality assessment of three goods such as company S, L, G. This quality assessment model is expected to use guidelines for assessing quality of wearable computer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.209-218
• /
• 2017

Healthcare services can be provided through a number of independent service platforms for measurement of vital signs, diagnosis and prevention of diseases, and Information and communication technology(ICT) such as internet and mobile are converged to provide health information to users at anytime and anywhere, and it is in the center of the IoT(Internet of things). Accordingly, in this paper, we designed IoT based urination management system and evaluate the performance. A low - power Zigbee network was constructed for the configuration of the urination management system. The implemented capacitive diaper sensor was operable for the duration of 2,000 hours. We also built a database server using Raspberry Pi, a tiny embedded device, and stored the collected data to verify the data through an Android-based mobile application. The proposed urination management system can be utilized not only for the older patients, but also for the infants.

• Spatial Information Research
• /
• v.5 no.1
• /
• pp.11-26
• /
• 1997

The purpose of this study is to analyze the locational characteristics of bank branch offices in Kangnam-Gu, Seoul by using Geographic Information System. The number of bank branch offices have sharply increased due to financial liberalization, while the scale of them is getting smaller. The procedure of this research has four steps. First, the spatial distribution of bank branch offices in Seoul is analyzed by the places and time. Second, the spatial variations of bank offices in dong districts of Seoul is explained by factor analysis and multiple regression analysis. Third, the location-allocation model which is embedded within network module in Arc/Info is applied in order to find out optimal location of bank offices in Kangnam-Gu. Finally, the grid module is used in creating the potential surface map for locational sites of new bank branch offices The factors to affect the location of the bank offices contain mainly economic variables including local tax, collUl1ercial area, total establismnent and total employment. The actual locational pattern of bank offices is similar to the idealized locational pattern proposed by the function of min-distance in location-allocation models. In conclusion, this study shows that spatial analysis functions may potentially be improved using GIS technologies. However in order to analyze the location of bank offices more precisely, it should be found out the way to collect more appropriate data, construct computerized base maps, and investigate consumer behaviour and behavioural characteristics of bank themselves..