• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2009

Biomedical mobile devices for ubiquitous healthcare consist of biomedical sensors and communication terminal. They have two types of configuration. One is the sensor-network type device using wired or wireless communication with intelligent sensors to acquire biomedical data. The other is the sensor embedded type device, where the data can be acquired directly by itself. There are many examples of sensor network type, such as, fall detection sensor, blood glucose sensor, and ECG sensors networked with commercial PDA phone and commercial phone terminal for ubiquitous healthcare. On the other hand, sensor embedded type mounts blood glucose sensor, accelerometer, and etc. on commercial phone. However, to enable true ubiquitous healthcare, motion sensing is essential, because users go around anywhere and their signals should be measured and monitored, when they are affected by the motion. Therefore, in this paper, two biomedical mobile devices with motion monitoring function were addressed. One is sensor-network type with motion monitoring function, which uses Zigbee communication to measure the ECG, PPG and acceleration. The other is sensor-embedded type with motion monitoring function, which also can measure the data and uses the built-in cellular phone network modem for remote connection. These devices are expected to be useful for ubiquitous healthcare in coming aged society in Korea.

• The Journal of Information Technology
• /
• v.8 no.4
• /
• pp.91-102
• /
• 2005

In this paper, development of embedded system based on Windows CE 5.0 which released recently is studied. Embedded softwares for the target board using S3C2410A SOC based on ARM920T core are composed of (1) BSP(Board Support Package) contains an OAL(OEM Adaptation Layer) which includes a boot loader for initializing and customizing target hardware, device drivers, and a corresponding set of configuration files (2) Windows CE 5.0 kernel (3) SDK and MP3 test application. Particularly, PB(Platform Builder) provides the efficient functions to build, test and debug the BSP and CE kernel. It is looked forward to being widely spread that Windows CE 5.0 will be utilized at smart devices such as PMP, CNS and DMB phone which inevitably require a display device.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.577-583
• /
• 2014

In this study, we introduce how to apply "Information and Communication Technology (ICT) to injection molding system. We report the current state of IT technology applied to produce their products in micro lens injection molding system. And we explain key technology of ICT for injection molding system and how to implement. Especially, we also mention about an embedded controller, also called as "M2M device". It provides programmable intelligent functions, communication, various interfaces, amplifier functions and mobile device connection to our application.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.938-939
• /
• 2008

Embedded OS is used widely in many case of today's systems. Using of Embedded OS for IED(Intelligent electronic device) is vary useful method of the processing of complex operations. In this paper, we designed embedded OS module for use as a more effective way in IED systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1141-1145
• /
• 2007

Rapid development of high-micro device design and wireless mobile communication technique enables each information instrument and devices to form intelligent network. The discussion of ubiquitous computing that provide information when and where desired is advanced actively. Information collected through ubiquitous sensor network assists it will be able to provide a convenient and accurate service. In this paper, we design and implement system which shows in realtime through TFT/LCD display device sensing data transmitted in embedded system instead of host pc.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.405-412
• /
• 2002

The embedded system has less fast CPU and lower memory than PC(personal Computer) or Workstation system. Therefore embedded operating is system is designed to efficiently use the limited resource in the system. Virtual memory management or the embedded linux have a low efficiency when page fault is occurred to get a data from I/O device. Because a data is moving from the swap device to main memory. This paper suggests virtual memory compression algorithm for improving in virtual memory management and capacity of space. In this paper, we present a way to performance implement a virtual memory compression system that achieves significant improvement for the embedded system.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.27-33
• /
• 2010

We have successfully demonstrated a high-pin-count and thin embedded-LSI package to realize next generation's mobile terminals. The following three design key points were applied: (i) Using Cu posts, (ii) Using the coreless structure, (iii) Using a Cu plate as the ground plane. In order to quantitatively determine the contribution of the three points, the five-stage process for reducing the number of metal layers is described by means of the electrical simulation. The point-(i) and (ii) are effective from the viewpoint of the power integrity (PI); that is, these points play important roles in reducing the number of metal layers, and especially the point-(ii) contributes at least twice as the point-(i). The point-(iii) is not effective in the PI, but has a few effects on the signal integrity (SI). For reducing the number of metal layers, we should, at first, pay attention whether the PI characteristics fulfill the specification, and then we should confirm the SI characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.757-770
• /
• 2020

We propose a hand gesture recognition method that is compatible with a head-up display (HUD) including small processing resource. For fast link adaptation with HUD, it is necessary to rapidly process gesture recognition and send the minimum amount of driver hand gesture data from the wearable device. Therefore, we use a method that recognizes each hand gesture with an inertial measurement unit (IMU) sensor based on revised correlation matching. The method of gesture recognition is executed by calculating the correlation between every axis of the acquired data set. By classifying pre-defined gesture values and actions, the proposed method enables rapid recognition. Furthermore, we evaluate the performance of the algorithm, which can be implanted within wearable bands, requiring a minimal process load. The experimental results evaluated the feasibility and effectiveness of our decomposed correlation matching method. Furthermore, we tested the proposed algorithm to confirm the effectiveness of the system using pre-defined gestures of specific motions with a wearable platform device. The experimental results validated the feasibility and effectiveness of the proposed hand gesture recognition system. Despite being based on a very simple concept, the proposed algorithm showed good performance in recognition accuracy.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.15-21
• /
• 2014

An electrostatic discharge (ESD) protection device, so called, N-type embedded silicon controlled rectifier (NESCR), was analyzed for high voltage operating I/O applications. A conventional NESCR standard device shows typical SCR-like characteristics with extremely low snapback holding voltage, which may cause latch-up problem during normal operation. However, our modified NESCR_CPS_PPW device with proper junction/channel engineering such as counter pocket source (CPS) and partial P-well structure demonstrates highly latch-up immune current-voltage characteristics with high snapback holding voltage and on-resistance.