• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• 대한의용생체공학회:의공학회지
• /
• 제30권3호
• /
• pp.185-190
• /
• 2009

Biomedical mobile devices for ubiquitous healthcare consist of biomedical sensors and communication terminal. They have two types of configuration. One is the sensor-network type device using wired or wireless communication with intelligent sensors to acquire biomedical data. The other is the sensor embedded type device, where the data can be acquired directly by itself. There are many examples of sensor network type, such as, fall detection sensor, blood glucose sensor, and ECG sensors networked with commercial PDA phone and commercial phone terminal for ubiquitous healthcare. On the other hand, sensor embedded type mounts blood glucose sensor, accelerometer, and etc. on commercial phone. However, to enable true ubiquitous healthcare, motion sensing is essential, because users go around anywhere and their signals should be measured and monitored, when they are affected by the motion. Therefore, in this paper, two biomedical mobile devices with motion monitoring function were addressed. One is sensor-network type with motion monitoring function, which uses Zigbee communication to measure the ECG, PPG and acceleration. The other is sensor-embedded type with motion monitoring function, which also can measure the data and uses the built-in cellular phone network modem for remote connection. These devices are expected to be useful for ubiquitous healthcare in coming aged society in Korea.

• 정보학연구
• /
• 제8권4호
• /
• pp.91-102
• /
• 2005

In this paper, development of embedded system based on Windows CE 5.0 which released recently is studied. Embedded softwares for the target board using S3C2410A SOC based on ARM920T core are composed of (1) BSP(Board Support Package) contains an OAL(OEM Adaptation Layer) which includes a boot loader for initializing and customizing target hardware, device drivers, and a corresponding set of configuration files (2) Windows CE 5.0 kernel (3) SDK and MP3 test application. Particularly, PB(Platform Builder) provides the efficient functions to build, test and debug the BSP and CE kernel. It is looked forward to being widely spread that Windows CE 5.0 will be utilized at smart devices such as PMP, CNS and DMB phone which inevitably require a display device.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.577-583
• /
• 2014

In this study, we introduce how to apply "Information and Communication Technology (ICT) to injection molding system. We report the current state of IT technology applied to produce their products in micro lens injection molding system. And we explain key technology of ICT for injection molding system and how to implement. Especially, we also mention about an embedded controller, also called as "M2M device". It provides programmable intelligent functions, communication, various interfaces, amplifier functions and mobile device connection to our application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.938-939
• /
• 2008

Embedded OS is used widely in many case of today's systems. Using of Embedded OS for IED(Intelligent electronic device) is vary useful method of the processing of complex operations. In this paper, we designed embedded OS module for use as a more effective way in IED systems.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1141-1145
• /
• 2007

최근 고성능 초소형 디바이스 설계 기술 및 무선 이동 통신 기술의 비약적인 발전으로 각 정보기기 및 디바이스들이 지능적으로 네트워크를 형성하여 사용자가 원하는 정보를 언제, 어디서나 쉽게 제공할 수 있는 유비쿼터스 컴퓨팅의 논의가 활발히 진행되고 있다. 유비쿼터스 센서 네트워크를 통해 센싱된 정보는 사용자가 원하는 서비스 및 주변 상황을 자동으로 인지하고 보다 편리하고 정확한 서비스를 제공할 수 있도록 도와준다 본 논문에서는 센서 노드로부터 전송되는 센싱 정보를 호스트 PC가 아닌 임베디드 시스템에서 전송받아 TFT/LCD 디스플레이를 통해 실시간적으로 보여주는 시스템을 설계 및 구현한다.

• 정보처리학회논문지A
• /
• 제9A권4호
• /
• pp.405-412
• /
• 2002

임베디드 시스템은 일반 PC(Personal Computer)나 워크스테이션에 비해 느린 CPU와 작은 메모리 공간을 사용하고 있다. 따라서 임베디드 운영체제는 제한된 자원을 효과적으로 사용하도록 설계되어져야 한다. 그런데 임베디드 리눅스의 가상 메모리 관리 기법에서 페이지 폴트가 발생할 경우 스왑 디바이스로 페이지를 이동하는 과정에서 성능 저하가 발생한다. 본 논문에서는 가상 메모리 기법의 효율성을 놀이며 메모리 공간의 효율성을 향상시킬 수 있는 가상 메모리 압축 기법을 구현하였다. 가상 메모리 압축 기법은 임베디드 리눅스의 가상 메모리 관리 기법에서 스왑핑이 발생할 경우 스왑 디바이스로 이동하는 페이지들을 압축하여 이동시킴으로서 스왑핑에서 발생하는 성능저하를 감소시키며, 압축된 스왑 디바이스의 운영으로 메모리의 공간 효율성을 높인 수 있다. 또한 본 논문에서는 메모리 내의 소량의 데이터 압축에 적합한 알고리즘을 고안하여, 압축률의 효율성과 시스템 성능을 향상시키고자 하였다.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.27-33
• /
• 2010

We have successfully demonstrated a high-pin-count and thin embedded-LSI package to realize next generation's mobile terminals. The following three design key points were applied: (i) Using Cu posts, (ii) Using the coreless structure, (iii) Using a Cu plate as the ground plane. In order to quantitatively determine the contribution of the three points, the five-stage process for reducing the number of metal layers is described by means of the electrical simulation. The point-(i) and (ii) are effective from the viewpoint of the power integrity (PI); that is, these points play important roles in reducing the number of metal layers, and especially the point-(ii) contributes at least twice as the point-(i). The point-(iii) is not effective in the PI, but has a few effects on the signal integrity (SI). For reducing the number of metal layers, we should, at first, pay attention whether the PI characteristics fulfill the specification, and then we should confirm the SI characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.757-770
• /
• 2020

We propose a hand gesture recognition method that is compatible with a head-up display (HUD) including small processing resource. For fast link adaptation with HUD, it is necessary to rapidly process gesture recognition and send the minimum amount of driver hand gesture data from the wearable device. Therefore, we use a method that recognizes each hand gesture with an inertial measurement unit (IMU) sensor based on revised correlation matching. The method of gesture recognition is executed by calculating the correlation between every axis of the acquired data set. By classifying pre-defined gesture values and actions, the proposed method enables rapid recognition. Furthermore, we evaluate the performance of the algorithm, which can be implanted within wearable bands, requiring a minimal process load. The experimental results evaluated the feasibility and effectiveness of our decomposed correlation matching method. Furthermore, we tested the proposed algorithm to confirm the effectiveness of the system using pre-defined gestures of specific motions with a wearable platform device. The experimental results validated the feasibility and effectiveness of the proposed hand gesture recognition system. Despite being based on a very simple concept, the proposed algorithm showed good performance in recognition accuracy.

• 한국위성정보통신학회논문지
• /
• 제9권3호
• /
• pp.15-21
• /
• 2014

NESCR 구조의 정전기 보호소자가 고전압 동작용 I/O 응용을 위해 분석되었다. 기존의 NESCR 표준소자는 매우 낮은 스냅백 홀딩 전압을 갖는 전형적인 SCR 특성을 나타내므로 정상적인 동작 동안 래치업 문제를 초래한다. 그러나 본 연구에서 제안하는 CPS 및 부분적으로 형성된 P-well 구조를 갖는 NESCR_CPS_PPW 변형소자는 높은 온-저항과 스냅백 홀딩 전압을 나타내어 래치업 면역 능력을 향상시킬 수 있었다.