• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.463-474
• /
• 1995

Modified Vainshtok weight function method is developed. The thermal shock stress intensity factors for elliptical surface cracks existed in the thin and thick walled cylinders are determined. The present results are compared with previous solutions and shown to be good agreement with them.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.10a
• /
• pp.34-35
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.347-349
• /
• 2001

본 논문에서는 극저주파 전자계 장해의 공학적 평가에 있어 기본이 되는 송전선 주변의 3차원 자기장 예측기법에 대하여 기술하였다. 송전선 주변의 무한영역 극저주파 자기장 계산을 위해서는 Biot-Savart's law에 의한 3차원 자기장 해석방법을 사용하였으며 교류자계 벡터의 중요한 파라미터인 elliptical polarized 특성에 대하여도 고찰하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.370-371
• /
• 2004

We propose and analyze a novel high-birefringence fiber incorporating an elliptical air hole in the core. Compared to solid elliptical core fibers, several times higher birefringence is achieved with a sub-wavelength-sized hole.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.182-188
• /
• 1999

A theoretical study of elastohydrodynamic lubrication of elliptical contacts with both rolling and spin has been carried out. A finite difference method and the Newton-Raphson method are applied to solve the problem. The velocity vectors resulting from combined spin and rolling/sliding motion lead to asymmetric pressure distributions and film shapes. Film contours and variations of the minimum and central film thicknesses are compared with various spin-roll ratios. At high spin-roll ratios the minimum film thickness is considerably reduced, whereas the central film thickness decreases less dramatically, The present numerical scheme can be used in the analysis of general elliptical contact problems.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.21-32
• /
• 1997

This paper proposes an elliptical world-modeling mehtrod in order to secure the safety of the mobile robot from the unreliability of ultrasonic sensors and to estimate the lateral orientation of the detected objects. This method is advnatageous because the total amount of data that the robot utilizes is reduced when historical and new data are clusterd during each sensing period and also because the objects in the environment can be almost exactly recognized. This paper also proposes a new local path planning algorithm which is divided into four different situations and gudies the robot through the safe local path using dat acollected in elliptical form. This algorithm can help the AMR navigate by allowing it to sum up the virtual vector forces made form the ellipses in order to select a safe subgoal. This local path plannin gmehtod using the elliptical world model has been proved by several navigation experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.408-415
• /
• 1998

The analysis model is the power law creep material containing an elliptical rigid inclusion subjected to the arbitrarily directional stress on infinite boudary. The stress analysis is performed using the conformal mapping function and complex pseudo-stress function. The stress distributions near an elliptical rigid inclusion are obtained with various ellipse shapes, strain hardening exponents and directions of applied stress.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.190-197
• /
• 2005

For precise micro-grooving and surface machining, a mechanism for creating elliptical vibration cutting (EVC) motion is proposed which uses two parallel piezoelectric actuators. And based on its kinematical analysis, variations of EVC path are investigated as a function of dimensional changes in the mechanism, phase difference and amplitude of excitation sinusoidal voltages. Using the proposed PZT mechanism, various types of two dimensional EVC paths including one dimensional vibration cutting path along the cutting direction and thrust direction can be easily obtained by changing the phase lag, the amplitude of the piezoelectric actuators, and the dimension of the mechanism.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.198-204
• /
• 2005

For precise micro V-grooving, ultrasonic elliptical vibration cutting (UEVC) is proposed using two parallel piezoelectric actuators, which are energized by sinusoidal voltages with a phase difference of 90 degrees. Experimental setup is composed of stacked PZT actuators, a single crystal diamond cutting tool, and a precision motorized xyz stage. It is found that the chip formed in the process of UEVC is discontinuous because of the periodic contacts and non-contacts occurring between the tool and workpiece. It is experimentally observed that the cutting force in the process of UEVC significantly reduces compared to the ordinary non-vibration cutting. In addition, the creation of burr during UEVC is significantly suppressed, which is attributable to the decrease in the specific cutting energy.

• Proceedings of the Korean Statistical Society Conference
• /
• 2000.11a
• /
• pp.5-12
• /
• 2000

Meta-analysis refers to quantitative methods for combining results from independent studies in order to draw overall conclusions. We consider hierarchical models including selection models under a skewed heavy tailed error distribution and it is shown to be useful in such Bayesian meta-analysis. A general class of skewed elliptical distribution is reviewed and developed. These rich class of models combine the information of independent studies, allowing investigation of variability both between and within studies, and weight function. Here we investigate sensitivity of results to unobserved studies by considering a hierarchical selection model and use Markov chain Monte Carlo methods to develop inference for the parameters of interest.