• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.183-189
• /
• 2010

Fault gouge samples were collected from the fault cores of the boundary faults between the Cretaceous Basement and the Tertiary Waeup Basin. Fractal dimensions (D) were obtained by using survivor grains which were analysed from six thin sections of the gouges under the optical microscope. The elliptical survivor grains show a shape preferred orientation almost parallel to clay foliation in matrix, suggesting that it was formed by the rotation of the survivor grains in abundant fine-grained matrix during repeated fault slips. The size distributions of the survivor grains follow power-laws with fractal dimensions in the 2.40-3.02 range. D values of all samples but one are higher than a specific D value equal to 2.58 which predicts the self similarity of fragmentation process in constrained comminution model (Sammis et al., 1987), which indicates large fault slip and multiple faulting. Probably the higher D values than 2.58 mean the non-self-similar evolution of cataclastic rocks where fragmentation mechanism changed from constrained comminution to the grain abrasion accompanying selective fracture of larger grains.

• Korean Journal of Food Science and Technology
• /
• v.18 no.6
• /
• pp.479-484
• /
• 1986

Two different types of solar collector for farm dryer- the flatplate type and the modified tubular type-were constructed and analyzed on their performances. The transparent plastic film, black painted galvanized iron sheet and black vinyl film were used for the cover and absorber of the flat-plate types. The simplified tubular type was constructed with transparent films for the cover and black vinyl films for the absorber Two elliptical iron rings were used to form a tubular shape through which air could pass. No remarkable differences were found in thermal efficiences between the absorbers made with galvanized iron sheet and black vinyl film. The average thermal efficiencies of the solar collectors were 42.8%(max.48.2%, min.38.2%) for flat plate type and 22.971 (max. 25.4%, min. 14.8%)) for tubular one. The empirical equations were proved to be applicable to the prediction of temperature elevation. The tubular solar heat collector was successfully applied to red peppers drying as a practical farm dryer. The drying rate was almost doubled compared to a conventional sun drying.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.799-813
• /
• 2020

Fatigue cracks of rib-to-deck (RD) joints have been frequently observed in the orthotropic steel decks (OSD) using conventional U-ribs (CU). Thickened edge U-rib (TEU) is proposed to enhance the fatigue strength of RD joints, and its effectiveness has been proved through fatigue tests. In-depth full-scale tests are further carried out to investigate both the fatigue strength and fractography of RD joints. Based on the test result, the mean fatigue strength of TEU specimens is 21% and 17% higher than that of CU specimens in terms of nominal and hot spot stress, respectively. Meanwhile, the development of fatigue cracks has been measured using the strain gauges installed along the welded joint. It is found that such the crack remains almost in semi-elliptical shape during the initiation and propagation. For the further application of TEUs, the design curve under the specific survival rate is required for the RD joints using TEUs. Since the fatigue strength of welded joints is highly scattered, the design curves derived by using the limited test data only are not reliable enough to be used as the reference. On this ground, an experiment-numerical hybrid approach is employed. Basing on the fatigue test, a probabilistic assessment model has been established to predict the fatigue strength of RD joints. In the model, the randomness in material properties, initial flaws and local geometries has been taken into consideration. The multiple-site initiation and coalescence of fatigue cracks are also considered to improve the accuracy. Validation of the model has been rigorously conducted using the test data. By extending the validated model, large-scale databases of fatigue life could be generated in a short period. Through the regression analysis on the generated database, design curves of the RD joint have been derived under the 95% survival rate. As the result, FAT 85 and FAT 110 curves with the power index m of 2.89 are recommended in the fatigue evaluation on the RD joint using TEUs in terms of nominal stress and hot spot stress respectively. Meanwhile, FAT 70 and FAT 90 curves with m of 2.92 are suggested in the evaluation on the RD joint using CUs in terms of nominal stress and hot spot stress, respectively.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.21-34
• /
• 2005

The initial conditions that generate bounded motion in eccentric reference orbit are determined for satellite formation flying. Because Hill's equations cannot describe the relative motion between two satellites in eccentric orbit, a new relative dynamics utilizing the nonlinearity and eccentricity correction for Hill's initial conditions is implemented. The constraint that matches angular rates of chief and deputy satellites is used to obtain the bounded motion between them. The constraint can be applied to satellite formation motions in eccentric orbit, since it implicates J2 perturbation due to the central body's aspherical gravitational forces. The periodic bounded motions are analyzed for the orbit with the eccentricity of less than 0.05 and about 0.5 km relative distance between chief and deputy satellites. It is mainly illustrated that the satellite formations in small eccentric orbits can have hounded motions; consequently, the formation can be kept by matching angular rates of the satellites. These results demonstrate an useful method that reduces the cost for operating satellites by providing effective initial conditions for satellite formation flying in eccentric orbit.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.4
• /
• pp.121-127
• /
• 1972

The present paper deals with the results of the comparative morphology on the urohyal bones on the right-eye flounders, pleuronectidae fishes in Korean waters. The results obtained are as follows : 1. The position of the tip of sciatic part is quite different depending on the genera and species of the fishes. The sciatic part of the genera, Platichthys and Cleisthenes, is very short extending to the middle portion of the main part. In the fishes of Eopsetta and Tanakius, it is also very short extending to the anterior 1/3 of the distance from the tip of main part. The fishes of Verasper and Dexistes have a short sciatic part which extends toward the posterior 1/4 of the distance from the tip of main part. The fishes Of Limanda, Clidoderma, Glyptecephalus and Microstomus have a long sciatic part which extends as long as the main part. However, those of Kareius and Pleuronichthys have a very long sciatic part extending twice long as the main part. The tip of sciatic part of the fishes belonging to Eopsetta, Verasper, Limanda, Platichthys, Tanakius and Glyptocephalus is a truncate form. It is pointed upward in the fishes of Kareius, Pleuronichthys, Clidoderma and Microstomus, but pointed forward in Cleisthenes and Dexistes. 2. The size and form of the cardiac apophysis vary with the developmental grades of the urohyal bone. The fishes of Eopsetta, Verasper, Platichthys, Tanakius, Kareius and Dexistes possess relatively large apophyses and those of Pleuronichthys and Clidoderma have small apophyses. Intermediate size of the apophysis is found in the fishes of Limanda, Microstomus and Cleisthenes. A long and barlike apophysis is found in Glyptocephalus. Three kinds of the cardiac. apophysis are found in the fishes examined, i. e., lateral wing in Eopsette, Verasper, Limanda, Platichthys, Tanakius, Glyptocephalus, Kareius, Pleuronichthys and Clidoderma, pointed forward in Microstomus and Cleisthenes, and truncate with a well-developed inner ridge type in Dexistes. 3. The angle of the main part and sciatic part varies from 30 to 60 degrees in the fishes studied except for the fishes of Pleuronichthys, Clidoderma and Microstomus which show a semi-elliptical form.

• Korean Journal of Oriental Medicine
• /
• v.12 no.2 s.17
• /
• pp.75-83
• /
• 2006

Pogostemonis and Agastachis Herba are the whole of Pogostemon cablin (BLANCO) BENTH or Agastache rugosa (FISCHER et MEYER) O. KUNTZE (family Labiatae) which is produced in all part of Korea and China. This drug is used for removing dampness by means of aromatics in oriental medicine. The standard formula of this drug is important from the viewpoint of the quality control. A characteristic discrimination of internal and external morphological standard in original plants and herbal states of Pogostemonis and Agastachis Herba are as follows. 1. The external characteristics: Pogostemon cablin has hairs and brown-like in stem, elliptical fruit. In the other hand, Agastache rugosa has no hairs and red-like in stem, obovatic trigone fruit. 2. The physical characteristics: Pogostemon cablin is gray in whole, has hairs in stem and numerous hairs of ash in leaf. In the other hand, Agastache rugosa is yellow-green in whole, has no hairs in stem. Specially the latter has deep-green colour and numerous hairs presenting mostly at lower epidermis in leaf. 3. The physical characteristics in currents: Pogostemon cablin is brown, has hairs and round-like stem. In the other hand, Agastache rugosa is green or yellow-green, has no hairs and tetragon in stem. 4. The internal characteristics: Pogostemon cablin has progressed spongy tissue in epidermal cell of leaf and many rank of epidermal cell in stem. In other hand, Agastache rugosa has 1 rank palisade tissue in leaf and few rank of epidermal cell in stem. In the external shape, it was possible that herbs were distinguished according to artificial classification and that same genus-degree of relatedness among herbs could be distinguished by more precise and active observation. In the shape of real herbs, I compared current herbs in market with original herbs which were just collected or were on the course of drying. In addition, it was possible that the internal shape could be identified by using microscope after butanol series. Though it was impossible to make distinction of herbs which are not current in my search contents, this search contents will be a standard for applying herbs in the future. An Additional standard establishment including physiochemical reaction and gene research is required in order to supplement the fault of this search.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.27-37
• /
• 1983

A method of dynamic analysis is developed for torsional free vibrations of elliptical-box girder type or stiffening truss system suspension bridge. In this study, the method based on a finite element technique using a digital computer, is illustrated by two numerical examples, the Namhae Bridge which is located in Kyungsang nam-do opened on June, 1973, and the Mt. Chunma Bridge is simple span pedestrian's suspension bridge with lateral bracing system in Mt. Chunma, Kyungki-do, are used. In general, dynamic modes of complex suspension bridges are three-dimensional in form, i.e., coupling between vertical and torsional motions. However, introduced that amplitudes of oscillation are infinitesimal for coincidence with the purpose of it's use, thereupon, the torsional vibration analyses are treated without coupling terms. A sufficient number of natural frequencies and mode shapes for torsional free vibration are presented in this paper. In the case of Mt. Chunma Bridge, the natural frequencies and periods are computed with and without reinforcement, respectively, and compared their discrepancies. The influence of the auxiliary reinforcing cables is prevailing in the first few modes, namely, 1st and 2nd in symmetric and 1st, 2nd and 3rd in antisymmetric vibration, and conspicuous in the symmetric compared with the antisymmetric motion, but in the higher modes, this kind of simple accessory elucidates rether converse effects. In the Namhae Bridge, the results are compared with the Manual's obtained by wind tunnel test. It reveals commendable agreement.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.11-21
• /
• 1996

This study has observed the development, structure and distribution of oil canals in mitsuba, seri, ashitaba and hamabohu, that are condiment herbs belonging to the Umbelliferae family, using a light microscope. Oil canals were found in the petioles, leaf blades, stems, roots, hypocotyls and cotyledons. Oil classified into distribution due to ring vascular bundles, as in mitsuba and seri, and distribution due to diffuse vascular bundles, as in ashitaba and hamabohu. Oil canal development in the cortex due to petiole thickening was followed by the development of collenchyma and vascular bundles. However, no vascular bundles were formed in some cases. Many oil canals were found in the periphery of the petioles. Oil canals in leaf blades were found on the adaxial and abaxial sides on the veins. Those around the main veins were larger. Steam oil canals were found in the cortex and pith in mitsuba and seri, and in the cortex and fundamental tissues around the xylem, in ashitaba and hamabohu, while those in the roots were found in the pericycle in mitsuba and seri, and in the collenchyma-like tissues and phloem in ashitaba and hamabohu. The transverse sections of oil canals were round or elliptical. The secretory cells in the cortex and pith were smaller than the neighboring parenchyma cells, while they were larger than the neighboring parenchyma cells in the phloem.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.534-539
• /
• 2014

This study was carried out to establish seed propagation method of Hydrangea petiolaris Siebold & Zucc., one of the specific and protected plant species for the floral region. Seed size ranged $1.36{\times}0.84mm$, weight of thousand seeds was $2.3{\pm}0.02mg$. Observation of seed morphology characters showed wrinkled surface and elliptical shape, indicating amber color and fine seeds. Moisture contents of seeds, increased rapidly by water-soaking treatment, recording maximum moisture contents (31.9%) after 48 hours. Percent germination of seeds was higher under the light than dark condition. Seed germination was the best at $25^{\circ}C$ under the light condition (78.0%) among temperature and light conditions treated. Percent germination, germination energy and $T_{50}$ was greatly improved by soaking in $GA_3$ solutions for 48 hours. Especially, $100{\sim}500mg{\cdot}L^{-1}$ $GA_3$ treatment resulted in the highest germination rate as 90.0% and above.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.409-414
• /
• 2020

In this study, we conducted a physiochemical property analysis using commercial faba bean flour (CFBF), faba bean flour (FBF), and faba bean starch (FBS). We observed that the FBS granules were elliptical and cracked on the surface. Moreover, FBS showed significantly lower solubility and apparent viscosity than FBF and CFBF. With respect to the pasting properties, FBS exhibited a peak viscosity of 1349.3 cP at 94.8℃ and a breakdown of 42.7 cP, whereas FBF and CFBF displayed no pasting properties. The FBS gelatinization enthalpy (12.9 J/g) was relatively high compared with the values obtained for FBF and CFBF (5.9 and 4.6 J/g, respectively). The FBS X-ray diffraction patterns showed a C-type pattern with peaks at diffraction angle (2θ) of 5.9°, 15.2°, 17.3°, and 23.1°, which were the same in FBF and CFBF with relatively low peak intensity. These results represent basic data for using faba bean as a food material.