• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.1
• /
• pp.9-16
• /
• 1974

To contribute towards more accurate estimation of the virtual inertia coefficient for the horizontal vibration of ships, three dimensional correction factor $J_H$ for the added mass of finitely long elliptic prismatic bars in horizontal vibration in a free surface of an ideal fluid are calculated. In the problem formulation Dr. T. Kumai's quasi-finite length concept[1,11,12] is employed. Now that, in Dr. Kumai's work[1] for the horizontal vibration the mathematical model was a circular cylinder, the principal aim of the authors' work is to investigate the influence of the beam-draft ratio B/T on $J_H$. The numerical results of this work are shown in Fig.3 graphically, from which we may recognize that the influence of B/T on $J_H$ is remarkable as much as that of the length-draft ratio L/T(refer to Fig.1 also). In Fig.3 the curves for B/T=2.00 are of those based on Dr. Kumai's result[1]. On the other hand, the experimental data obtained by Burril et al.[9] for the horizontal vibration of finitely long prismatic bars of various cross-section shapes are compared with the theoretical added mass coefficients defined by combination of the authors' $J_H$ from Fig.3 and two dimensional coefficients $C_H$ obtained by Lewis form approximation for the corresponding sections. They are in reasonable correspondence with each other as shown in Fig.2. Finally, considering that the longitudinal profile of full-form ship's hull is well resembled to that of an elliptic cylinder and that the influences of other factors such as the sectional area coefficient and the shape of section contour itself can be well merged in the two dimensional added mass coefficient, the authors recommend that the data given in Fig.3 may be successfully adopted for the three dimensional correction factor the added mass in the horizontal vibration of hull-form ships.

• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.97-103
• /
• 2017

Implementation of faster pairing calculation is the basis of efficient pairing-based cryptographic protocol implementation. Generally, pairing is a costly operation carried out over the extension field of degree $k{\geq}12$. But the twist property of the pairing friendly curve allows us to calculate pairing over the sub-field twisted curve, where the extension degree becomes k/d and twist degree d = 2, 3, 4, 6. The calculation cost is reduced substantially by twisting but it makes the discrete logarithm problem easier if the curve parameters are not carefully chosen. Therefore, this paper considers the most recent parameters setting presented by Barbulescu and Duquesne [1] for pairing-based cryptography; that are secure enough for 128-bit security level; to explicitly show the quartic twist (d = 4) and sextic twist (d = 6) mapping between the isomorphic rational point groups for KSS (Kachisa-Schaefer-Scott) curve of embedding degree k = 16 and k = 18, receptively. This paper also evaluates the performance enhancement of the obtained twisted mapping by comparing the elliptic curve scalar multiplications.

• ETRI Journal
• /
• v.31 no.2
• /
• pp.129-139
• /
• 2009

This paper provides an efficient algorithm for computing the ${\eta}_T$ pairing on supersingular elliptic curves over fields of characteristic two. In the proposed algorithm, we deploy a modified multiplication in $F_{2^{4n}}$ using the Vandermonde matrix. For F, G ${\in}$ $F_{2^{4n}}$ the proposed multiplication method computes ${\beta}{\cdot}F{\cdot}G$ instead of $F{\cdot}G$ with some ${\beta}$ ${\in}$ $F^*_{2n}$ because ${\beta}$ is eliminated by the final exponentiation of the ${\eta}_T$ pairing computation. The proposed multiplication method asymptotically requires only 7 multiplications in $F_{2^n}$ as n ${\rightarrow}$ ${\infty}$, while the cost of the previously fastest Karatsuba method is 9 multiplications in $F_{2^n}$. Consequently, the cost of the ${\eta}_T$ pairing computation is reduced by 14.3%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.254-256
• /
• 2019

소수체 GF(p)와 이진체 $GF(2^m)$ 상의 다중 타원곡선을 지원하는 듀얼 필드 ECC (DF-ECC) 프로세서를 설계하였다. DF-ECC 프로세서의 저면적 설와 다양한 타원곡선의 지원이 가능하도록 워드 기반 몽고메리 곱셈 알고리듬을 적용한 유한체 곱셈기를 저면적으로 설계하였으며, 페르마의 소정리(Fermat's little theorem)를 유한체 곱셈기에 적용하여 유한체 나눗셈을 구현하였다. 설계된 DF-ECC 프로세서는 스칼라 곱셈과 점 연산, 그리고 모듈러 연산 기능을 가져 다양한 공개키 암호 프로토콜에 응용이 가능하며, 유한체 및 모듈러 연산에 적용되는 파라미터를 내부 연산으로 생성하여 다양한 표준의 타원곡선을 지원하도록 하였다. 설계된 DF-ECC는 FPGA 구현을 하드웨어 동작을 검증하였으며, 0.18-um CMOS 셀 라이브러리로 합성한 결과 22,262 GEs (gate equivalences)와 11 kbit RAM으로 구현되었으며, 최대 100 MHz의 동작 주파수를 갖는다. 설계된 DF-ECC 프로세서의 연산성능은 B-163 Koblitz 타원곡선의 경우 스칼라 곱셈 연산에 885,044 클록 사이클이 소요되며, B-571 슈도랜덤 타원곡선의 스칼라 곱셈에는 25,040,625 사이클이 소요된다.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.356-363
• /
• 2020

As a becoming era of Internet-of-Things, various devices are connected via wire or wirless networks. Although every day life is more convenient, security problems are also increasing such as privacy, information leak, denial of services. Since ECC, a kind of public key cryptosystem, has a smaller key size compared to RSA, it is widely used for environmentally constrained devices. The key of ECC in constrained devices can be exposed to power analysis attacks during scalar multiplication operation. In this paper, a key-randomization method is suggested for scalar multiplication on SECG parameters. It is against differential power analysis and has operational efficiency. In order to increase of operational efficiency, the proposed method uses the property 2^lP=∓cP where the constant c is small compared to the order n of SECG parameters and n=2^l±c. The number of operation for the Coron's key-randomization scalar multiplication algorithm is 21, but the number of operation for the proposed method in this paper is (3/2)l. It has efficiency about 25% compared to the Coron's method using full random numbers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.95-101
• /
• 2016

With the rapid development of Internet and communication network technology, various studies had proceeded to develop the technology of wireless sensor networks. Authentication schemes for user and sensor are critical and important security issue to use wireless sensors legally. First, Das introduce a user authentication scheme using smart card and password for wireless sensor networks, various studies had proceeded. Chem et al. suggested a secure user authentication scheme against smart card loss attack but Chen et al. scheme does not still resolve some security vulnerability such as perfect forward secrecy, session key exposure by gateway node, anonymity, and the password check. To resolve the problems, this paper proposes a security enhanced user authentication using the fuzzy extraction, elliptic curves cryptography and dynamic ID and analyzes the security.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2610-2630
• /
• 2021

The aim of this paper is to propose the alternative algorithm to finish the process in public key cryptography. In general, the proposed method can be selected to finish both of modular exponentiation and point multiplication. Although this method is not the best method in all cases, it may be the most efficient method when the condition responds well to this approach. Assuming that the binary system of the exponent or the multiplier is considered and it is divided into groups, the binary system is in excellent condition when the number of groups is small. Each group is generated from a number of 0 that is adjacent to each other. The main idea behind the proposed method is to convert the exponent or the multiplier as the subtraction between two integers. For these integers, it is impossible that the bit which is equal to 1 will be assigned in the same position. The experiment is split into two sections. The first section is an experiment to examine the modular exponentiation. The results demonstrate that the cost of completing the modular multiplication is decreased if the number of groups is very small. In tables 7 - 9, four modular multiplications are required when there is one group, although number of bits which are equal to 0 in each table is different. The second component is the experiment to examine the point multiplication process in Elliptic Curves Cryptography. The findings demonstrate that if the number of groups is small, the costs to compute point additions are low. In tables 10 - 12, assigning one group is appeared, number of point addition is one when the multiplier of a point is an even number. However, three-point additions are required when the multiplier is an odd number. As a result, the proposed method is an alternative way that should be used when the number of groups is minimal in order to save the costs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1137-1148
• /
• 2021

The main obstacle for implementing CSIDH-based cryptography is that it requires generating a kernel of a small prime order to compute the group action using Velu's formula. As this is a quite painstaking process for small torsion points, a new approach called radical isogeny is recently proposed to compute chains of isogenies from a coefficient of an elliptic curve. This paper presents an optimized implementation of radical isogenies and analyzes its ideal use in CSIDH-based cryptography. We tailor the formula for transforming Montgomery curves and Tate normal form and further optimized the radical 2- and 3- isogeny formula and a projective version of radical 5- and 7- isogeny. For CSIDH-512, using radical isogeny of degree up to 7 is 15.3% faster than standard constant-time CSIDH. For CSIDH-4096, using only radical 2-isogeny is the optimal choice.