• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1134-1138
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, electrical properties and filtration performance of electrospun filter media are quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. Electrospun filters show same collection efficiency with low pressure drop compare to commercialized HEPA filters. Surface charge potential and surface charge density of electrospun filters are increased with increasing applied voltage. Also collection efficiency of electrospun filters is increased with increasing surface charge potential and surface charge density.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.6-21
• /
• 2008

We have investigated the effect of the forward and reverse ESD pulse accumulation on the development of the oxide VCSEL's electrical and optical characteristics. The forward ESD-induced degradation is complicated, showing three degradation phases with increasing ESD voltage while the reverse ESD-induced degradation is divided by a sudden distinctive change in elecorl-optical characteristics. By comparing the measured L-I-V characteristics and their derivatives with the fitted characteristics using an equivalent circuit model as well as the large signal circuit model, the development of the oxide VCSEL's electro-optical characteristics under forward and reverse ESD conditions has been fully understood.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.6
• /
• pp.264-269
• /
• 2005

The electrostatic comb drive actuator is one of the main building blocks in the field of micro electro-mechanical systems (MEMS). Most of the comb actuators presented previously have fingers that are rectangular in shape which produce a stable, constant force output during actuation. The use of sawtooth fixed fingers in a comb drive, which were presumed to produce an increasing force output with displacement due to the increased number of regions where fringing force, the driving force of comb actuators, appear. The dimensions of the sawtooth were derived from finite element analysis (FEA) of simplified finger models with sawtooth type fingers of various dimension and were compared to the rectangular finger model that showed that the sawtooth type fingers have $7\~9$ times stronger driving force. Finally, comb drive actuators with sawtooth type and rectangular fingers were fabricated and although the gap was bigger, the comb actuator with sawtooth type fingers showed about 1.7 times greater electrostatic force than the one with rectangular fingers at equal driving voltages. In conclusion, using the proposed sawtooth type comb fingers in a comb drive makes it possible to increase its displacement or reduce the driving voltage.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.7
• /
• pp.63-70
• /
• 2019

An electro-aerodynamic lens for improving the performance of virtual impactor has been proposed in this study. ANSYS FLUENT Release 16.1 was used for numerical analysis of virtual impactor with and without the electro-aerodynamic lens, used to collimate the incoming aerosol particles into a particle beam before injecting the particles into the virtual impactor. Particles supplied to the electro-aerodynamic lens were assumed to be highly charged. By using an aerodynamic lens before the virtual impactor, without any electrostatic effect, it was found that the cut-off diameter of the virtual impactor was reduced from $4.2{\mu}m$ to $0.68{\mu}m$ and that the fine particle contamination problem became more serious. However, by employing the combined electrostatic and aerodynamic effects, that is, by applying electric voltage potential to the electro-aerodynamic lens, the cut-off diameter was found to be further reduced to $0.45{\mu}m$ and the fine particle contamination was eliminated.

• Journal of Integrative Natural Science
• /
• v.3 no.4
• /
• pp.226-230
• /
• 2010

Calculation of partial charge is important in chemistry. However, because there are many methods developed, it is of considerable interest to know how to calculate and apply properly to address various chemical problems. For basis set, usually double zeta quality is acceptable, and double zeta polarization function would be enough for most cases. To describe electronic state more accurately, Many electron configurations would be necessary to describe highly strained or anionic species. The NPA population introduced new concept about amide bonds, i.e., the planar geometry of nitrogen atom may not come from resonance, but from the lowering of p-orbital energy by electronegative carbonyl carbon atom. The issues for hypervalent atomic charges was also addressed by various charge derivation scheme. When the charge schemes were applied to organolithium compounds, the ionic nature of boding was revealed. This comes from the fact that previous Mulliken partial atomic charges overemphasized the covalent character, wihout much justification. The other partial charge derivation schemes such as NPA(natural population analysis), IPP (Integrated Projected Population) showed that much more ionic picture. ESP potential derived charges are generally believed to be suitable to describe intermolecular interactions, therefore they are used for molecular dynamics simulations and CoMFA (comparative molecular field analysis). The charge derivation schemes using multipole polarization was mainly applied to reproduce experimental infrared spectroscopy. In some reports these schemes are also suitable for intermecular electrostatic interactions. Charges derived from electron density gradient have shown the some bonds are not straight, but actually bent. The proper choice of charge-calculation method along with suitable level of theory and basis set are briefly discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.199-204
• /
• 2021

In this study, an isogoemetric analysis (IGA) method that uses NURBS (Non-Uniform Rational B-Spline) basis functions in computer-aided design (CAD) systems is employed to account for the geometric exactness of curved electrodes constituting an electro-adhesive pad in electrostatic problems. The IGA is advantageous for obtaining precise normal vectors when computing the electro-adhesive forces on curved surfaces. By performing parametric studies using numerical examples, we demonstrate the superior performance of the curved electrodes, which is attributed to the increase in the normal component of the electro-adhesive forces. In addition, concave curved electrodes exhibit better performance than their convex counterparts.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.355-356
• /
• 2003

Coagulation is a process whereby particles collide with one another due to their relative motion, and adhere to form large particles. Coagulation caused by the random Brownian motion of particles is called Brownian coagulation. Many properties, such as light scattering, electrostatic charges, toxicity, as well as physical processes, including diffusion, condensation and thermophoresis depend strongly on their size distribution. Therefore, Brownian coagulation is substantially important in atmospheric science, combustion technology, inhalation toxicology and nuclear safety analysis. (omitted)

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.74-81
• /
• 1997

I정전 모-터는 일반적으로 분극전하와 전계의 상호작용을 이용한 것으로서 전계내에 축적되는 전계에너지(W=1/2 *ED)의 힘을 기계적 출력으로 도출하여 이용하는 것이다. 본 논문에서는 유한 요소법을 사용하여 단상 정전 모터의 전계와 등전위분포 및 미소한 토오크를 시뮬레이션을 통하여 구하고 해석하였다. 그 결과 이 모터는 특성상 정전, 역전이 가능하고 고전압에서 응용이 가능하므로 특수기의 서어보모터로 쓸 수 있겠고, 설비중 고압으로 인한 위험이 따르는 곳의 안전예고기, 고전압계, 위상 판별기로도 사용이 가능할 것으로 기대된다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.877_878
• /
• 2009

이 논문에서는, 편미분 방정식을 풀기위한 수치해석 기법들 가운데, 유한요소법과 달리 요소를 사용하지 않는 방법인 무요소법중의 하나인 FMLSRKM을 소개하고자한다. 이 방법의 근사화 과정과정전계 해석, 축대칭, 비균일매질에의 적용을 보임으로써 FMLSRKM이 훌륭한 근사해를 만들어낸다는 것을 검증하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.168-171
• /
• 1999

This paper describes the influence of conducting particle within the coaxial cylindrical electrodes gap under alternating voltage condition investigated using charge simulation method. If the conducting particles precent in the gas insulated system, they can cause decrement of breakdown voltage. Thus, three dimensions computations of electric fields and electrostatic forces have been carried out according to particle location. The results show a good agreement with those of outside country, which can offer a practical reference on the insulation design of domestic GIS.