• Title/Summary/Keyword: Electronic picture frame

Search Result 13, Processing Time 0.022 seconds

Design and Implementation of Image Display Module for Low-cost High Definition Television (저가의 HDTV를 위한 영상출력 모듈의 설계 및 구현)

  • Choi Jae-Seung;Kim Ick-Hwan;Nam Jae-Yeal;Ha Yeong-Ho
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.42 no.3 s.303
    • /
    • pp.65-72
    • /
    • 2005
  • This paper proposes an image display system that reduces the core performance of the processor allocated in the image display, thereby enabling the use of a less expensive processor with a low performance. Essentially, the proposed system supports an image display function for a high resolution in the module of an electronic picture frame (EPF) using a low-performance processor based on converting high definition (HD) image data at a 15Hz frame rate into HD image data at a 60Hz frame rate for use in a digital TV system. As a result, the proposed system can reduce the processor performance to a level corresponding to an image display with a low frame rate, thereby reducing the product cost and allowing various additional functions. Finally, the proposed system is implemented to confirm effectiveness.

Wavelet Transform Coding for Image Communication (영상 통신을 위한 웨이블릿 변환 부호화)

  • Kim, Yong-Yeon
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.6 no.1
    • /
    • pp.61-67
    • /
    • 2011
  • In this paper, a new method for effective video coding is studied. Picture set filter is proposed for preserving compression ratio and video quality. This filter controls the compression ratio of each frame depending on the correlation to the reference frame by selectively eliminating less important high-resolution areas. Consequently, video quality can be preserved and bit rate can be controlled adaptively. In the simulation, to test the performance of the proposed coding method, comparisons with the full search block matching algorithm and the differential image coding algorithm are made. In the former case, video quality, compression ratio and encoding time is improved. In the latter case, video quality is degraded, but compression ratio and encoding time is improved. Consequently, the proposed method shows a reasonably good performance over existing ones.

The improvement of moving picture quality in TFT-LCD with Blinking Backlight System and Liquid Crystal Overdriving Methode (Blinking Backlight System과 Liquid Crystal Overdriving Methode를 사용한 TFT-LCD의 동영상 화질개선을 위한 연구)

  • Han, Jung-Min;Kim, Jong-Hwan;Kim, Young-Hwan;Kim, Gwi-Yeol;Seo, Dae-Shik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.05a
    • /
    • pp.146-149
    • /
    • 2005
  • In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, whichholds images in entire frame period, while impulsetype device generate image in very short time. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measureme.

  • PDF

Characteristics of Motion-blur Free TFT-LCD using Short Persistent CCFL in Blinking Backlight Driving

  • Han, Jeong-Min;Ok, Chul-Ho;Hwang, Jeoung-Yeon;Seo, Dae-Shik
    • Transactions on Electrical and Electronic Materials
    • /
    • v.8 no.4
    • /
    • pp.166-169
    • /
    • 2007
  • In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

Adaptive Rate-Distortion Optimized Multiple Loop Filtering Algorithm (적응적 율-왜곡 최적 다중 루프 필터 기법)

  • Hong, Soon-Gi;Choe, Yoon-Sik;Kim, Yong-Goo
    • Journal of Broadcast Engineering
    • /
    • v.15 no.5
    • /
    • pp.617-630
    • /
    • 2010
  • At 37th VCEG meeting in Jan. 2009, Toshiba proposed Quadtree-based Adaptive Loop Filter (QALF). The basic concept of QALF is to apply Wiener filter to decoded image after the conventional deblocking filter and to represent the filter on/off flag data for each basic filtering unit in a more efficient way of quadtree structure. QALF could enhance the compression performance of around more than 9%, but the structure of one filter for a decoded frame leaves room for further improvement in the sense that optimal filter for one region of a frame could quite different from the optimal filter for other parts of a picture. This paper proposes multiple adaptive loop filters for better utilization of local characteristics of decoded frame to optimize the region-based Wiener filters. Additional filters, proposed in this paper, cover separate spatial area of each decoded frame according to the performance of previously designed filter(s) to provide the flexibility of rate-distortion based selection of the number of filters.

A Study on Improvement Technology of Image Resolution using Mobile Camera (이동 카메라를 이용한 사진 해상도 향상 기술 연구)

  • Buri Kim;Jongtaek Oh
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.23 no.4
    • /
    • pp.93-98
    • /
    • 2023
  • Recently, as the size of display devices tends to increase and taking pictures with smart phones has become commonplace, the need for taking high-resolution pictures with smart phones is increasing. However, when the lens size of a camera is limited, such as in a smartphone, there is a physical limit to increasing the resolution of a photo. This paper is about a technique for increasing the resolution of a picture even when using a small-sized lens like a smartphone camera. It is to take multiple pictures while moving the smartphone, and to increase the resolution by combining these pictures into one picture. First of all, two pictures were taken while moving the smartphone horizontally for the 2D picture. Processes such as camera matrix estimation, and homograph inverse transformation were performed using OpenCV, and the resolution was improved by synthesizing one picture. It was confirmed that the resolution was improved in parts such as oblique lines or arcs on several test pictures.

Medical CRM Frame Design for Medical Institution (의료기관 전문 의료용 CRM 프레임 설계)

  • Kim, Gui-Jung
    • The Journal of the Korea Contents Association
    • /
    • v.8 no.12
    • /
    • pp.20-27
    • /
    • 2008
  • Hospitals today use independent systems for each department and job such as Hospital Information Sytem(HIS), Picture Archiving Communications System(PACS), Ordering Communication System(OCS), Electronic Medical Record(EMR), Enterprise Resource Planning(ERP), etc and each system employs its own DB. So, it is impossible to integrate information within the institution and difficult to keep transparency and consistency of data. I in this study offered a data integration environment through flexible management linked with other systems, and by doing that, designed a medical CRM frame which offers the optimum service the customer wants at the optimum time. I designed 4 of medical CRM frame: customer relationship management, public relations/marketing, service management, and statistics/analysis by the customer relationship management process standardization and aimed to offer tailored mobile contents according to customer's characters and health situation on the basis of customer's data by securing mobile medical contents for personalized medical information service.

A Study on Frame Interpolation and Nonlinear Moving Vector Estimation Using GRNN (GRNN 알고리즘을 이용한 비선형적 움직임 벡터 추정 및 프레임 보간연구)

  • Lee, Seung-Joo;Bang, Min-Suk;Yun, Kee-Bang;Kim, Ki-Doo
    • Journal of IKEEE
    • /
    • v.17 no.4
    • /
    • pp.459-468
    • /
    • 2013
  • Under nonlinear characteristics of frames, we propose the frame interpolation using GRNN to enhance the visual picture quality. By full search with block size of 128x128~1x1 to reduce blocky artifact and image overlay, we select the frame having block of minimum error and re-estimate the nonlinear moving vector using GRNN. We compare our scheme with forward(backward) motion compensation, bidirectional motion compensation when the object movement is large or the object image includes zoom-in and zoom-out or camera focus has changed. Experimental results show that the proposed method provides better performance in subjective image quality compared to conventional MCFI methods.

Design of Moving Picture Retrieval System using Scene Change Technique (장면 전환 기법을 이용한 동영상 검색 시스템 설계)

  • Kim, Jang-Hui;Kang, Dae-Seong
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.44 no.3
    • /
    • pp.8-15
    • /
    • 2007
  • Recently, it is important to process multimedia data efficiently. Especially, in case of retrieval of multimedia information, technique of user interface and retrieval technique are necessary. This paper proposes a new technique which detects cuts effectively in compressed image information by MPEG. A cut is a turning point of scenes. The cut-detection is the basic work and the first-step for video indexing and retrieval. Existing methods have a weak point that they detect wrong cuts according to change of a screen such as fast motion of an object, movement of a camera and a flash. Because they compare between previous frame and present frame. The proposed technique detects shots at first using DC(Direct Current) coefficient of DCT(Discrete Cosine Transform). The database is composed of these detected shots. Features are extracted by HMMD color model and edge histogram descriptor(EHD) among the MPEG-7 visual descriptors. And detections are performed in sequence by the proposed matching technique. Through this experiments, an improved video segmentation system is implemented that it performs more quickly and precisely than existing techniques have.

A Study on the Driving Waveform for High Contrast Ratio Realization of AC PDP (AC PDP에서 고콘트라스트 실현을 위한 구동 파형에 관한 연구)

  • An, Yang-Ki;Yoon, Dong-Han
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.39 no.6
    • /
    • pp.27-33
    • /
    • 2002
  • This paper proposes a method to drive an AC plasma display panel(PDP) with a significantly improved contrast ratio. In the proposed method, during the first sub-field of one frame, all PDP cells are reset by the ramp waveform, and during the other sub-fields, only the cells turned on in the previous sub-field are reset. No light is emitted during the reset period of every sub-field except the first sub-field. For a 10-bit picture, the luminance of the dark level for the proposed method is 10 times lower than that for the conventional method, in which the ramp waveform for the reset is used in every sub-field. Accordingly, the contrast ratio for the proposed method is 10 times higher than that for the conventional method. For the 10-bit picture, the measured contrast ratio was about 3080:1 for the proposed method and about 285:1 for the conventional method, resulting in 10.8 times increase in the contrast ratio. This result shows that the proposed method can realize an image with high contrast ratio.