• Journal of Fisheries and Marine Sciences Education
• /
• v.16 no.2
• /
• pp.210-217
• /
• 2004

Cooling technology has been a vital prerequisite for the rapid, if not explosive, growth of the electronic equipment industry. This has been especially true during the last 20 years with the advent of intergrated circuit chips and their applications in computers and related electronic products. The purpose of this study is to develop a telecommunication equipment cooling system using a thermoelectric module combined with cooling fan. Thermoelectric module is a device that can perform cooling only by input of electric power. In the present study, the cooling package using the thermoeletric module has been developed to improve the thermal performance. The cooling characteristics of the electronic chip was placed into the subrack and it can be rapidly assembled or disassembled in the equipment rack. As a preliminary experiment, the cooling performances between a conventional way using a cooling fin and a proposed method applying the thermoelectric module was comosed and analyzyed. The cooling performance at a simulated electronic component packaging a thermomodule operated well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.36-36
• /
• 2007

본 논문에서는 SoP-L(System on Package-Laminates) 기술을 이용하여 이종의 유전율을 가진 유기물 적층 기반의 수동소자를 이용한 GSM/DCS 대역 분리용 diplexer를 설계, 제작하였고 그 특성을 고찰하였다. SoP-L 기술은 LTCC기술과 같은 타 SoP 기술과 비교해서 이종의 물질을 접합하는데 용이하고 공정비용이 저렴하다. 이러한 장점을 이용하여 캐때시터는 유전율 40의 고유전율 재료를 사이에 두고 구성하였고, 인덕터 부문에는 유전율 4률 적용, 정방혈 스파이럴 구조로 두 개 층으로 구성하여 소형화를 이룰 수 있었다. 제작 시에 구리와 유기물을 적층, patterning 하였고, 수직 via hole 을 형성하고 구리의 무전해, 전해 도금 과정을 거쳐 각 소자를 연결하였다. 이러한 과정을 거쳐 제작된 diplexer의 GSM 저역 통과 필터는 0.52 dB이하의 삽입손실과 20 dB 이상의 반사손실을 가지고 DCS 통과 대역 부근에 notch 가 존재하도록 설계함으로써 DCS 통과 대역에서 17 dB 이상의 저지특성을 나타내었다. DCS 고역 통과 필터는 1.2 dB 이하의 삽입손실과 16 dB 이상의 반사손실을 가지며 GSM 통과 대역 부근에 notch를 가지도록 설계하여 GSM 통과대역에서 32 dB 이상의 저지특성을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.191-191
• /
• 2009

In this paper, we have confirmed the temperature of LED chip and McPCB with thermal simulation program which is CFDedign V10 for analysis the thermal flow of HP LED package. we have known that the heat from LED chip is transferred through heat slug to copper layer of McPCB. the temperature of LED chip shows 85.11 [$^{\circ}C$], which shows the temperature gap of 7.52 [$^{\circ}C$] against McPCB. the gap of temperature affect reliability of the wire bonding and die attachment. therefore, copper layer of heat slug on the McPCB should designed with the largest dimension.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.6
• /
• pp.312-316
• /
• 2015

Through silicon via (TSV) technology holds the promise of chip-to-chip or chip-to-package interconnections for higher performance with reduced signal delay and power consumption. It includes high aspect ratio silicon etching, insulation liner deposition, and seamless metal filling. The desired etch profile should be straightforward, but high aspect ratio silicon etching is still a challenge. In this paper, we investigate the use of etch hard mask for finer TSVs etching to have clear definition of etched via pattern. Conventionally employed photoresist methods were initially evaluated as reference processes, and oxide and metal hard mask were investigated. We admit that pure metal mask is rarely employed in industry, but the etch result of metal mask support why hard mask are more realistic for finer TSV etching than conventional photoresist and oxide mask.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.297-298
• /
• 2009

대부분의 반도체 소자의 고장 원인은 85%정도가 열로 인한 것이며, 고출력 LED는 인가된 에너지의 20%정도의 광으로 출력되며 나머지 80%가 열로 전환된다. 본 논문에서는 PMS-50과 KEITHLEY 2430을 이용하여 PCB 구조와 Via hole 구성에 따른 LED 패키지의 열적 광학적 특성을 분석하였다. 0.6mm의 Via hole을 가진 FR4 PCB의 열특성이 가장 우수하였으며, Via hole 0.6mm FR4 PCB의 경우 McPCB에 상응하는 광출력 특성을 보였다.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.24-36
• /
• 2004

In order for electronic commerce to be successful, it must have a theoretical framework that considers the characteristics of the internet user who are consumers in the cyber space and impacts their purchase intentions. We were able to obtain participations of 316 people, and derived statistics by means of SPSS/PC version 10.0 and Amos 4.0 statistics package. We found that, the higher the degree of skill and the sense of challenge, the level of involvement and perceived service quality increased. And the degree of skill has a negative influence on awareness of perceived risk than the sense of challenge. Perceived service quality, perceived risk and involvement has a influence on purchase intentions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.139-142
• /
• 2001

As microeletronics technology continues to progress, there is also a continuous demand on highly integration and miniaturization of systems. For example, it is desirable to package several integrated circuits together in multilayer structure, such as multichip modules, to achieve higher levels of compactness and higher performance. Passive components (i.e., capacitors, resistors, and inductors) are very important for many MCM applications. In addition, the low-temperature co-fired ceramic (LTCC) process has considerable potential for embedding passive components in a small area at a low cost. In this paper, we investigate a method of statistically modeling integrated passive devices from just a small number of test structures. A set of LTCC inductors is fabricated and their scattering parameters (5-parameters) are measured for a range of frequencies from 50MHz to 5GHz. An accurate model for each test structure is obtained by using a building block based modeling methodology and circuit parameter optimization using the HSPICE circuit simulator.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.272-277
• /
• 2004

The primary aim of this study is to investigate new semi-abrasive free slurry including acid colloidal silica and hydrogen peroxide for copper chemical-mechanical planarization (CMP). In general, slurry for copper CMP consists of colloidal silica as an abrasive, organic acid as a complex-forming agent, hydrogen peroxide as an oxidizing agent, a film forming agent, a pH control agent and several additives. We developed new semi-abrasive free slurry (SAFS) including below 0.5％ acid colloidal silica. We evaluated additives as stabilizers for hydrogen peroxide as well as accelerators in tantalum nitride CMP process. We also estimated dispersion stability and Zeta potential of the acid colloidal silica with additives. The extent of enhancement in tantalum nitride CMP was verified through anelectrochemical test. This approach may be useful for the application of single and first step copper CMP slurry with one package system.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.32-39
• /
• 2015

With the simplicity of process and high reliability in chip or package bonding, epoxy solder paste (ESP) has been recently considered as a competitive bonding material. The ESP material is composed of solder powder and epoxy formulation which can remove oxide layers on the surface of solder powder and pad finish metal. The bonding formed using ESP shows outstanding bonding strength and suppresses electrical short between adjacent pads or leads owing to the reinforced structure by cured epoxy after the bonding. ESP is also expected to suppress the formation and growth of whisker on the pads or leads. With the mentioned advantages, ESP is anticipated to become a spotlighted bonding material in the assembly of flexible electronics and electronic modules in automotive vehicles.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.1-4
• /
• 2015

Qualification includes all activities to demonstrate that a product meets and exceeds the reliability goals. Manufacturers need to spend time and resources for the qualification processes under the pressure of reducing time to market, as well as offering a competitive price. Failure to qualify a product could result in economic loss such as warranty and recall claims and the manufacturer could lose the reputation in the market. In order to provide valid and reliable qualification results, manufacturers are required to make extra effort based on the operational and environmental characteristics of the product. This paper discusses optimal interval censoring design for reliability prediction of electronic packages under limited time and resources. This design should provide more accurate assessment of package capability and thus deliver better reliability prediction.