• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.193-197
• /
• 2001

This paper presents a novel circuit topology of the double two-switch forward type high frequency transformer linked soft-switching PWM DC-DC power converter with tapped inductor filters that can operate under a condition of the low peak voltage stress across the power semiconductor devices and lowered peak current stress through the transformer for some high power applications. This circuit topology of an interleaved two-switch forward soft-switching power converter is proposed in the order to minimize an idle circulating current due to the tapped inductor filter without of any additional active auxiliary resonant-assisted snubber circuits, such as active resonant DC link snubbers and AC link snubbers, active resonant commutation leg link snubbers. The unique advantages of this power converter are less power circuit components and power semiconductor devices, constant frequency PWM scheme, cost effective configuration and wider soft-switching PWM operation range under PWM power regulations load variations. The practical effectiveness of the proposed soft-switching converter circuit topology is tested by simulations and is proved by experimental results received from the 500W-100kHz breadboard setup.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.10-19
• /
• 2005

It may not be strange to anticipate that the forth-coming epoch of electronic government would bring us lots of convenience on account of ubiquitous environment with mobile devices. Such environment enables us to access the up-to-date information anytime and also a worker to carry out administration services to perform one's line of duty at anytime with electronic, handy devices such as PDA. What we now recognize from the field of electronic traffic administration services is that the office work flow as well as the public services has been remarkably improved by using of not only text but video and image information under the distributed, mobile environment. One of key requirements of this kinds of services is the feature of exchanging various information among multiple information publishers and subscribers. We call this feature Messaging Services generally The study in this paper focuses on the architecture design of the Messaging Engine software, complying with the pattern-oriented software architecture design methodology. And our contribution also goes to the discovery of three architecture patterns found in the design process and the efficient multi-threading architecture compared to one of the Messaging Engine solutions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.27-35
• /
• 2016

A Low jitter dual output frequency synthesizer for smart audio devices is described in this paper. It has been fabricated in a 1.8 V Dongbu $0.18-{\mu}m$ CMOS process. Output frequency is controlled by 3 rd order Sigma-Delta Modulation and digital divider. The frequency synthesizer has a size of $0.6mm^2$, frequency range of 0.6-200 MHz, loop bandwidth of 350 kHz, and rms jitter of 11.4 ps-21.6 ps.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.137-146
• /
• 1998

Recently many devices print electronic images in a variety of ways. The reproduced color, however, is different from the original color because of the difference of hardware characteristics. To maintain device independent color, gamut mapping method is proposed. The proposed color gamut mapping uses nonlinear intensity mapping and clipping for saturation mapping on HSI color space. In the dithering operation, expanded nonlinear ordered dithering and modified error diffusion are proposed. The proposed ordered dithering uses expanded nonlinear quantization which considers overlapping phenomena of neighbored printing dots. In the modified error diffusion, quantization errors to be diffused are adjusted to improve both image blur and color change produced in the error diffusion. So, the printed image is similar to the image of monitor. Our results indicate that proposed algorithm can produce high quality image in the low bit color devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.855-863
• /
• 2017

Because Li-ion battery and Li-Polymer battery have high-energy storage density, they are used for various electronic devices such as electronic cigarette, electronic bicycle, drone, second battery, even golf cart and electronic car. Recently, however, battery explosion is sometimes occurring on electronic devices using Li-ion battery and is becoming serious as bodily harm is breaking out due to explosion. For this, this paper described the Li-ion Battery's operating principles and verified the cause of explosion by overload tests caused by the high-energy storage density. According to the these experiments, we conducted a study to develope scanning techniques of fire and safety measures.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.38-50
• /
• 1999

Currently many devices reproduce electronic images in the various ways. However the color that is reproduced in any device is different from the original color due to the difference in the gamut between devices. In this paper, an image dependent gamut mapping method is proposed. This method clips the chroma with compensating for the change of lightness caused by the lightness scaling. The anchor point, which is the center point in the mapping, is set as a lower point by the proposed method than a point by the conventional mapping method. This reduces the color difference between point. In addition, to heighten the color contrast on the constant hue, the different two mapping methods are applied to the printer gamut which is divided in two region, bright region and dark region. Consequently, the printer output image was highly consistent with the corresponding monitor image.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.222-226
• /
• 2009

The objective of this study is to share multimedia contents included in existing digital devices and to solve the problems of an increase in installation fees and non-environmentally friendly interiors. This study designed a new digital signal transmitter and receiver using power line transmission and HDMI in order to solve the problems in the existing systems. The transmitter and receiver designed in this study used an AD9867BCPZ PLC chip in which the transmission came from digital signals originating in a PC, and the system architecture was configured so that the outputs signals were connected to a TV from the receiver. The experiment was implemented by adding a Video Test Generator, a USBPre external sound card, and Smaart Live 6 for analyzing the characteristics of the configured system. In the video test results, it was verified that communication was actively implemented, and the image quality showed a constant level from the measurement of the captured video. In the case of the sound, it was verified that more than 90% of the sound signals were normally transmitted and received from the examination of their phases and magnitudes. Thus, the performance of the system designed in this study was verified, which leads to the resolution of some of the problems found in current digital devices.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.49-57
• /
• 2019

In this paper, we describe the implementation methods and algorithms for the various technologies and devices required for the construction of the engagement HILS(Hardware In the Loop Simulation) in the limited space to simulate the high-speed maneuvering encounter situation of the weapon system in 3-dimensional real world space. Through this research, we have been able to suggest ways to analyze the major design elements of future electronic warfare equipment through experiments simulating actual engagements between various high-speed maneuvering weapons systems and electronic warfare devices in the future battlefield. It was confirmed that the M&S technology could be used to eliminate technical risks, reduce development cost, and shorten development time in the future real system development. The results of this study can be a great assist not only for the field of electronic warfare system research and development, but also for the research & implementation on HILS of various engaging class weapons systems.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.19-27
• /
• 2021

With the development of information and communication technology and the increasing use of smart devices, universities are using an electronic attendance-absence management system using smart devices to facilitate efficient attendance management. Currently, the electronic attendance-absence management system has the disadvantage of causing an error in attendance when the Wi-Fi connection is not well established because the student's smartphone independently conducts electronic attendance, and it is difficult to manage attendance because the real-time push message transmission function is excluded. In this paper, we propose an electronic attendance-absence management system to prevent irregular attendance, provide real-time attendance results, and solve delays in attendance processing due to Wi-Fi connection problems. The proposed system can prevent delays in attendance processing as a result of irregular attendance because the instructor's smartphone processes proposed system using the Bluetooth communication function of the instructor's smartphone and the students' smartphone. In addition, it has the advantage of being able to notice management result in real time with the push message server.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.351-354
• /
• 2006

We developed highly efficient fluorescent dopants for full-color OLEDs. For blue, green and red OLEDs, current efficiencies of 8.7cd/A, 20.5 cd/A and 11.4 cd/A at $10mA/cm^2$ were achieved, respectively. Lifetime of the blue device was estimated to be 23,000hours at an initial luminance of $1,000cd/m^2$. Moreover, long lifetime over 100,000 hours was estimated in the green and red devices. Furthermore, we obtained a three-component white OLED by using these new fluorescent materials. This white OLED shows a current efficiency of 16.1cd/A with extrapolated lifetime over 70,000 hours at $1,000cd/m^2$, and more excellent color reproducibility for full-color displays with color filters and general lighting, compared to previous fluorescent white OLEDs.