• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1929_1930
• /
• 2009

Fully embedded tunable bandpass filter (BPF) with inductive coupling circuits is newly designed and demonstrated for UHF TV tuner ranged from 500MHz to 900MHz receivers. Conventional RF tuning circuit with an electromagnetic coupled tunable filter has several problems such as large size, high volume, and high cost, since the electromagnetic coupled filter is comprised of several passive components and air core inductors to be assembled and controlled manually. To address these obstacles, compact tunable filter with inductive coupling circuit was embedded into low cost organic package substrate. The embedded filter was optimally designed to have high performance by using high Q spiral stacked inductors, high dielectric $BaTiO_3$ composite MIM capacitors, varactor diodes. It exhibited low insertion loss of approximately -2dB, high return loss of below -10dB, and large tuning range of 56.3%. It has an extremely compact size of $3.4{\times}4.4{\times}0.5mm^3$.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1240_1241
• /
• 2009

In this paper, sol-gel-spin coated $Pb(ZrTi)O_3$ thin film with $ZrO_2$ buffer-layer and $PbTiO_3$ seed-layer was investigated for vibration MEMS energy harvester to scavenge power from ambient vibration via d33 piezoelectric mode. Piezoelectric thin film deposition techniques on insulating layer is the important key for $d_{33}$ mode of piezoelectric vibration energy harvester. $ZrO_2$ buff-layer was utilized as an insulating layer. $PbTIO_3$ seed-layer was applied as an inter-layer between PZT and $ZrO_2$ layer to improve the crystalline of PZT thin film. The fabricated PZT thin film had a remanent polarization of 5.3uC/$cm^2$ and the coercive field of 60kV/cm. The fabricated energy harvester using PZT thin film with PTO seed-layer generated 1.1uW of electrical power to $2.2M{\Omega}$ of load with $4.4V_{pvp}$ from vibration of 0.39g at 528Hz.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2008

This paper presents electromagnetic interference(EMI) suppression method applied on the direct current(DC) motor driver for power tail gate control. EMI noise is generated by the fast switching of power devices connected to electric loads. It has become a matter of concern because of the vast increase in the number and sophistication of electronic system in automotive environment. The proposed EMI reduction method is based on the principle of reducing the transient speed of power devices by changing the parameters of the driver circuit related to the power MOSFET. In this paper, power losses were calculated by loss equations and thermal simulation was used to evaluate the effect on printed circuit board. Based on these results, the DC motor driver was fabricated and tested. The proposed method can help to design a DC motor driver which allows it to obtain an acceptable compromise between power losses and EMI.

• Advances in nano research
• /
• v.9 no.2
• /
• pp.105-112
• /
• 2020

Silicene is a two-dimensional (2D) derivative of silicon (Si) arranged in honeycomb lattice. It is predicted to be compatible with the present fabrication technology. However, its gapless properties (neglecting the spin-orbiting effect) hinders its application as digital switching devices. Thus, a suitable band gap engineering technique is required. In the present work, the band structure and density of states of uniformly doped silicene are obtained using the nearest neighbour tight-binding (NNTB) model. The results show that uniform substitutional doping using aluminium (Al) has successfully induced band gap in silicene. The band structures of the presented model are in good agreement with published results in terms of the valence band and conduction band. The band gap values extracted from the presented models are 0.39 eV and 0.78 eV for uniformly doped silicene with Al at the doping concentration of 12.5% and 25% respectively. The results show that the engineered band gap values are within the range for electronic switching applications. The conclusions of this study envisage that the uniformly doped silicene with Al can be further explored and applied in the future nanoelectronic devices.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.114-119
• /
• 2017

In this paper we present the search on HC-06 Bluetooth based driver module for emergency LED Multi-Directional Indicator. Nowadays, a growing trends in which electronic displays such as LED, LCD or plasma monitors are being installed in public places like bars, stores, entertainment areas, restaurants, lobbies, etc. In this paper, the study is curried out on efficiency of HC-06 Bluetooth module based controller driver that relates generally to the field of emergency signage management systems for displaying various indicator contents remotely on electronic displays in public and privates venues. It allows user smart devices interaction remotely with digital signage by providing content for displaying on at least one display in a venue. Depending on the emergency case, HC-06 Bluetooth based driver module proves the high efficiency as well as good performance of processing and communicating remotely the indicator based message that is displayed from a venue management control system by using smart devices. The system combines smart device that linked to HC-06 Bluetooth module with ATmega168/328 embedded micro controller which result by switching the displayer containing the digital signage indicator based message.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.315-318
• /
• 1998

Organic light-emitting diodes(OLEDs) or electroluminescent devices have attracted much attention because of their possible application as large-area light-emitting displays. Their structure was based on employing a multilayer device structure containing an emitting layer and a carrier transporting layer of suitable organic materials. In this study, several Tb complexes such as Tb(ACAC)$_3$(Phen), Tb(ACAC)$_3$(Phen-Cl) and Tb(TPB)$_3$(Phen) were synthesized and the photoluminescence(PL) and electroluminescence (EL) characteristics of their thin films were investigated by fabricating the devices having a structure of anode/HTL/terbium-oomplex/ETL/cathode, where TPD was used as an hole transporting and Alq$_3$ and TAZ-Si were used as an electron transporting materials. It was found that the photoluminescence(PL) and electroluminescence(EL) characteristics of these terbium complexes were dependent upon the ligands coordinated to terbium metal. Details on the explanation of electrical transport phenomena of the structure with I-V characteristics of the OLEDs using the trapped-charge-limited current(TCLC) model will be discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.259-266
• /
• 2004

In this paper. a new two types of EST(Emitter Switched Thyristor) structures are proposed to improve the electrical characteristics including the current saturation capability. Besides, the two dimensional numerical simulations were carried out using MEDICI to verify the validity of the device and examine the electrical characteristics. First, a vortical trench electrode EST device is proposed to improve snap-back effect and its blocking voltage. Second, a dual trench gate EST device is proposed to obtain high voltage current saturation characteristics and high blocking voltage and to eliminate snap-back effect. The two proposed devices have superior electrical characteristics when compared to conventional devices. In the vertical trench electrode EST, the snap-back effect is considerably improved by using the vertical trench gate and cathode electrode and the blocking voltage is one times better than that of the conventional EST. And in the dual trench gate EST, the snap-back effect is completely removed by using the series turn-on and turn-off MOSFET and the blocking voltage is one times better than that of the conventional EST. Especially current saturation capability is three times better than that of the other EST.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.249-250
• /
• 2006

In this study, we tried to Improve c-axis orientation of ZnO thin films used in a piezoelectric layer of FBAR devices. First. ZnO deposition conditions were determined by changing various conditions of RF sputter such as RF power, pressure and $O_2$ contents. The Piezoelectric layer was deposited on ZnO buffer layer of dense structure which was formed by ALD equipment. The c-axis orientation of ZnO piezoelectric layer was measured by XRD and we confirmed fine Grains and columnar structure by SEM, AFM.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.1-9
• /
• 2013

Recently flexible electronic devices have attracted a great deal of attention because of new application possibilities including flexible display, flexible memory, flexible solar cell and flexible sensor. In particular, development of flexible memory is essential to complete the flexible integrated systems such as flexible smart phone and wearable computer. Research of flexible memory has primarily focused on organic-based materials. However, organic flexible memory has still several disadvantages, including lower electrical performance and long-term reliability. Therefore, emerging research in flexible electronics seeks to develop flexible and stretchable technologies that offer the high performance of conventional wafer-based devices as well as superior flexibility. Development of flexible memory with inorganic silicon materials is based on the design principle that any material, in sufficiently thin form, is flexible and bendable since the bending strain is directly proportional to thickness. This article reviews progress in recent technologies for flexible memory and flexible electronics with inorganic silicon materials, including transfer printing technology, wavy or serpentine interconnection structure for reducing strain, and wafer thinning technology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1427-1434
• /
• 2014

Among the medical devices, medical treatments inflicting physical energy from the outside of the body to the inside or using the energy from the devices which take advantages of chemical changes of the human body require a high degree of reliability and safety. In particular, the medical treatment on the most exposed skin to the external surface in all parts of the human body will be very important. In this perspective, when you undergo skin treatment, you need to reduce all risks and to maximize the effect of treatment equipment. Therefore, the development of equipment which guarantees high therapeutic efficacy and safety is essential.