Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Study of EMI Suppression Method Applied on DC Motor Driver of Power Tail Gate

파워테일게이트의 DC모터구동회로에 적용된 EMI 저감기법에 대한 연구

  • Kim, Yeong-Sik (Department of Electrical & Electronic Engineering, Yonsei University) ;
  • Yoon, Yong-Soo (Department of Electrical Engineering, Ansan College of Technology) ;
  • Jung, Hun (R&D Center, Daesung Electric Co.) ;
  • Gohng, Jun-Ho (R&D Center, Daesung Electric Co.) ;
  • Lee, Sang-Ho (R&D Center, Daesung Electric Co.)
  • 김영식 (연세대학교 전기전자공학과) ;
  • 윤용수 (안산공과대학 전기과) ;
  • 정훈 (대성전기 기술연구소) ;
  • 공준호 (대성전기 기술연구소) ;
  • 이상호 (대성전기 기술연구소)
  • Published : 2008.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents electromagnetic interference(EMI) suppression method applied on the direct current(DC) motor driver for power tail gate control. EMI noise is generated by the fast switching of power devices connected to electric loads. It has become a matter of concern because of the vast increase in the number and sophistication of electronic system in automotive environment. The proposed EMI reduction method is based on the principle of reducing the transient speed of power devices by changing the parameters of the driver circuit related to the power MOSFET. In this paper, power losses were calculated by loss equations and thermal simulation was used to evaluate the effect on printed circuit board. Based on these results, the DC motor driver was fabricated and tested. The proposed method can help to design a DC motor driver which allows it to obtain an acceptable compromise between power losses and EMI.

Keywords

References

  1. G. Choe, S. Jho, W. Jeong, S. Jang, S. Kang and S. Han, "Analysis of Electro-magnetic Waves for the 815-865MHz and 900-950MHz Bands in a Cabin of Automobile," Transactions of KSAE, Vol.14, No.1, pp.176-182, 2006
  2. J. Loeckx and G. Gielen, "Efficient Identification of Major Contributions to EMI-induced Rectification Effects in Analog Automotive Circuits," 17th International Zurich Symposium, pp.148-151, 2006
  3. A. Lakhsasi, Y. Hamri and A. Skorek, "Partially Coupled Electro-thermal Analysis for Accurate Prediction of Switching Device," IEEE Canadian Conference on Electrical and Computer Eng., Vol.1, pp.375-380, 2001
  4. L. Locher, Introduction to Power MOSFETs and Their Applications, Application Note AN- 558, National Semiconductor Co., 1988
  5. S. V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Co., USA, pp.41-77, 1980