• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.379-388
• /
• 2016

There are various system defects from weapons manufacturing due to the numerous production processes and various production environments. The first kind of defect is patent defects, which can be detected by visual inspection, functional testing, and existing quality control procedures during the manufacturing process. The second kind is latent defects, which cannot be detected though existing quality management approaches because of the complexity of the system and manufacturing process. To minimize the initial defect problems, environmental stress screening (ESS) is needed to detect the defects, remove them, and improve the product conditions based on the environmental stress conditions of temperature and vibration. We implemented a tool for quantitative ESS effectiveness analysis and profile design automation based on MIL-HDBK-344 and verified it using six scenarios with different temperature stress, vibration stress, and test designs.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.171-180
• /
• 2022

In the knowledge development of online assessment in learning management systems (LMSs), many assessments are evaluated weekly in the summer training course for undergraduate students in the Faculty of Computing and Information Technology at King Abdul-Aziz University in Saudi Arabia. The number of performance assessments in the summer training course reaches 15 weeks. Many of them, however, are sent or done informally or through unreliable ways and cannot be verified by third parties. Therefore, applying the concept of digital transformation is essential. This research study reported herein used the action design research (ADR) method to build a new information technology system that could assist in the digital transformation. An electronic platform was designed, developed, implemented, and evaluated using the ADR method so that the main people involved in the summer training process (i.e., students, academic supervisors, and administrators) would have a high level of satisfaction with it. The study was conducted on 452 students, 105 academic supervisors, and 15 administrative staff and was conducted during the summer semester of 2020. All the training processes were digitally transformed and automated to control and raise the level and reliability of the training. All involved people were satisfied, thus, shifting the process to be in a digital form assist in achieving the high-level goal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.69-74
• /
• 2010

Now the CAN(controller Area Network) is using electronic modules as a serial communication which is very robust to noise. Especially the CAN is using for automotive part that very popular in which automotive electronic control module, engine controller unit, sensor modules, etc. but the CAN has the order of priority to linking node and also has fault confinement so using in these features that is applied to in factory automation product line. The CAN communication is basically very robust to electric noise so varied applying to others part. In this paper, we suggest to CAN interface for embedded system that is possible for error detection using two CAN nodes on Hi-speed, full-CAN.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.617-622
• /
• 2018

Simultaneous control of blowers and heat exchangers affecting the air sealing and flow conditions inside the green house is essential to the management of $CO_2$ concentration. Currently, the demand for automation systems and integrated control is steadily increasing according to increasing of farm areas per person due to the reduction of agricultural population. This paper proposes the integrated control system that can control simultaneously the existing devices such as measurement switching devices which are important variables in the supply of $CO_2$, $CO_2$ generator fuel and combustion air mixture ratio(air-to-fuel ratio), and $CO_2$ supply control under internal and external conditions.

• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.175-188
• /
• 2020

The paper focuses on conception and development of complex systems composed mainly by a pump syringe subsystem and an electronically injector that facilitates patients saving data operation for medical staff use. We successfully developed conventional approaches for medical system staff requirements, such as system boundary conditions. Decisions at a given level are studied. We propose a complex system architecture, based mainly on patients collected data and ordered stepper injection parameters. System is successfully simulated and prototyped. Design and implement tests are accomplished, the proposed system ensures both the electric syringe pump and the electric injector operation. In addition, this new system introduces several additional options as patient database development and automation injection operation. Development and software operating tests to create a visualization control interface are validated. The solution performs syringe function and electronic injector. User can manage a syringe in two C modes of technology. We propose a program composed of two linked parts. If an error such radiologist bad target selection is made, an image with lower intrinsic quality emerges. Developed Shoot syringe different electronic cards are simulated and prototyped, in addition, maps are driven, prototype. All tests results are accomplished.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.239-244
• /
• 2019

With the development of Cyber-Physical Systems(CPS), several technologies such as automation control, automotive and intelligent house systems have been developed. To enable communication among various components of such systems, several wired and wireless communication protocols are used. The Controller Area Network(CAN) is one of such wired communication protocols that is popularly used for communication in automobiles and other machinery in the industry. In this paper, we designed and implemented a response time analysis system for CAN communication. The reliable data transfer among various electronic components in a significant time is crucial for the smooth operation of an electric vehicle. Therefore, this system is designed to conveniently analyze the response time of various electronic components of a CAN enabled system. The priority for transmission of the messages in the CAN bus is determined by the message identifier. As the number of nodes increases the transmission of low priority messages is delayed due to the existence of higher priority messages on the bus. We used Raspberry Pi3 and PiCAN2 board to simulate the data transfer for studying the comparative delay in low priority nodes.

• Journal of Surface Science and Engineering
• /
• v.40 no.4
• /
• pp.185-189
• /
• 2007

A scanning electron microscope (SEM) is a complex system, consisting of many sophisticated components. For a systematic characterization, a $2^4$ full factorial experiment was conducted. The SEM components examined include condenser lens 1 and 2 (denoted as A and B, respectively), and Objective lens (coarse and fine-denoted as C and D respectively). A statistical analysis was conduced to investigate factor effects and variations In response surfaces. Among four factors, main effect analysis revealed that A and D were Identified as the dominant factor. Moreover, B showed conflicting effect against C. The $R^2$ of statistical regression model constructed was about 69.6%. The model generated 3D response surface plots facilitated understanding of complex tactor effects.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.41-51
• /
• 2015

Management systems for electronic library have been developed on the basis of Client/Server or ASP framework in domestic market for a long time. Therefore, both service provider and user suffer from their high cost and effort in management, maintenance, and repairing of software as well as hardware. Recently in addition, mobile devices like smartphone and tablet PC are frequently used as terminal devices to access computers through the Internet or other networks, sophisticatedly customized or personalized interface for n-screen service became more important issue these days. In this paper, we propose a new scheme of integrated management system for electronic library based on SaaS and Web Standard. We design and implement the proposed scheme applying Electronic Cabinet Guidelines for Web Standard and Universal Code System. Hosted application management style and software on demand style service models based on SaaS are basically applied to develop the management system. Moreover, a newly improved concept of duplication check algorithm in a hierarchical evaluation process is presented and a personalized interface based on web standard is applied to implement the system. Algorithms of duplication check for journal, volume/number, and paper are hierarchically presented with their logic flows. Total framework of our development obeys the standard feature of Electronic Cabinet Guidelines offered by Korea government so that we can accomplish standard of application software, quality improvement of total software, and reusability extension. Scope of our development includes core services of library automation system such as acquisition, list-up, loan-and-return, and their related services. We focus on interoperation compatibility between elementary sub-systems throughout complex network and structural features. Reanalyzing and standardizing each part of the system under the concept on the cloud of service, we construct an integrated development environment for generating, test, operation, and maintenance. Finally, performance analyses are performed about resource usability of server, memory amount used, and response time of server etc. As a result of measurements fulfilled over 5 times at different test points and using different data, the average response time is about 62.9 seconds for 100 clients, which takes about 0.629 seconds per client on the average. We can expect this result makes it possible to operate the system in real-time level proof. Resource usability and memory occupation are also good and moderate comparing to the conventional systems. As total verification tests, we present a simple proof to obey Electronic Cabinet Guidelines and a record of TTA authentication test for topics about SaaS maturity, performance, and application program features.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.232-237
• /
• 2008

Korea is one of the most advanced countries in terms of nation-wide readiness for conducting complex trade processes in an electronic way. Since various trade processes are well-known for their complexity and cost as well as time consuming characteristics due to required collaborations with involving parties, automation and efficiency are always the main concern of trade-related practitioners. Using information technology can be a possible solution to this problem and Korea has developed the national e-trade infrastructure called "u-Trade Hub." In this paper, we propose the framework to enhance the national integrated e-trade system called "u-Trade Hub," which is ready to be released for commercial use in near future. We propose the framework to upgrade u-Trade Hub in four directions: (1) opening, (2) strengthening community feature, (3) modularization, (4) seeking profitability. In this paper, we study and compare national e-trade environment of other countries such as Singapore and Japan. Then, we analyze and design the enhanced e-trade infrastructure based on Web 2.0.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2843-2845
• /
• 2005

This paper deals with the design of real-time embedded system using RTOS (real-time operating system) and SOPC (system on a programmable chip). It is, in general, known that RTOS has the problem of time delay caused by the multiple tasks and task management approach. Since the increase in time delay in real-time embedded system makes the overall system have the poor performance or the critical behavior of instability and unreliability, the method employed RTOS and SOPC is proposed to attack the above problems. The proposed system is implemented on the RC-motor controller and is verified by real experiment.