• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1225-1232
• /
• 2000

This study was carried out to define the effect of electron beam irradiation on the physico-chemical characteristics of sewage sludges. The experimental evidence showed that both pH and alkalinity of irradiated sludge were generally increased as the dose of irradiation increased. It was found that the soluble protein concentration (SPC) and soluble chemical oxygen demand (SCOD) from the sludge right after electron beam irradiation at 3kGy(kilo-joule/kg) increased 2.2 times and 10 times respectively more than those sludges without electron beam treatment. This highly solubilized organics could be resulted in a good soluble substrate for the subsequent anaerobic digestion process. The specific resistance of filtration (SRF) tests showed that sludge dewaterability under electron beam irradiation at 6kGy was found to be 8.8 times higher than that of unirradiated sludge. The sludge dewaterability seemed to be directly related to the dosage of electron beam irradiation up to 10kGy. However, the efficiency of sludge dewaterability tended to be smaller with higher applied irradiation dose. In comparing treatments by different inorganic chemical conditioner with irradiated and unirradiated sludges, it appeared that the dewaterability with irradiated sludge was approximately 4-10 times better that that of unirradiated sludge. Even electron beam treatment itself could replace the result from the sludge conditioned with inorganic chemical coagulants.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.56-63
• /
• 2023

In this paper, we studied the effect of electron beam irradiation on sol-gel indium-gallium-zinc oxide (IGZO) thin films under air and nitrogen atmosphere and carried out the electrical characterization of the s ol-gel IGZO thin film transistors (TFTs). To investigate the optical properties, crystalline structure and chemical state of the sol-gel IGZO thin films after electron beam irradiation, UV-Visible spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were carried out. The sol-gel IGZO thin films exhibited over 80% transmittance in the visible range. The XRD analysis confirmed the amorphous nature of the sol-gel IGZO films regardless of electron beam irradiation. When electron beam irradiation was conducted in a nitrogen (N₂) atmosphere, we observed an increased proportion of peaks related to M-O bonding contributed to the improved quality of the thin films. Sol-gel IGZO TFTs subjected to electron beam exposure in a nitrogen atmosphere exhibited enhanced electrical characteristics in terms of on/off ratio and electron mobility. In addition, the electrical parameters of the transistor (on/off ratio, threshold voltage, electron mobility, subthreshold swing) remained relatively stable over time, indicating that the electron beam exposure process in a nitrogen atmosphere could enhance the reliability of IGZO-based thin-film transistors in the fabrication of sol-gel processed TFTs.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.14-21
• /
• 2004

It is essential to increase the switching speed of power devices to reduce the energy loss because high frequency is commonly used in power device operation these days. In this work electron irradiation has been conducted to reduce the lifetime of minority carriers and thereby to increase the switching speed of a$p^+- n^-$ junction diode. Effects of electron irradiation on the electrical properties of the diode are reported The switching speed is effectively increased. Also the junction leakages and the forward voltage drop which are anticipated to increase are found to be negligible in the $p^+- n^-$ junction diodes irradiated with the optimum energy and dose. The analysis results of DLTS and C-V profiling indicate that the defects induced by electron irradiation in the silicon substrate are donor-like ones which have the energy levels of 0.284 eV and 0.483 eV. Considering all the experimental results in this study, it might be concluded that electron irradiation is a very useful technique in improving the switching speed and thereby reducing the energy loss of $p^+- n^-$ junction diode power devices.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.6
• /
• pp.310-314
• /
• 2015

We have considered the influence of electron irradiation on the optical and electrical properties of $In_2O_3/Ti$ bi-layered films prepared with RF and DC magnetron sputtering. The $In_2O_3/Ti$ thin films irradiated at 600 eV shows the lowest resistivity of $6.9{\times}10^{-4}{\Omega}cm$. The optical transmittance in a visible wave length region also influenced with the electron irradiation energy. The film that electron irradiated at 600 eV shows 82.9% of optical transmittance in this study. By comparison of figure of merit, it is concluded that the opto-electrical performance of $In_2O_3/Ti$ bi-layered film is improved with electron irradiation.

• Journal of Ginseng Research
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2005

Electron beam (EB), electrically produced from an electron accelerator, was compared with gamma ray (GR) in terms of its influence at doses from 0 to 15 kGy on the lipid stability of white and red ginseng powders. Irradiation (EB or GR) less than 10 kGy showed negligible effects on the composition of fatty acids in white and red ginseng powders. The thiobarbituric acid (TBA) value, however, increased with irradiation doses and storage time in both samples, which was more significant in red ginseng than white ginseng. Red ginseng revealed higher electron donating ability than white ginseng, even though there was insignificant difference between non-irradiated and irradiated samples irrespective of the post-irradiation storage for 4 months under room temperature as well as energy sources applied.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.217-220
• /
• 2017

We deposited transparent conductive ZTO/Ag/ZTO trilayer thin films on glass substrates through magnetron sputtering, and then conducted intense electron beam irradiation on their surfaces to investigate the effects of electron irradiation on the structural, optical, and electrical properties of these films. After deposition, we electron irradiated the ZTO/Ag/ZTO films for 10 min at electron energies of 300, 500, and 700 eV. The films that were electron irradiated at 700 eV showed a higher optical transmittance (84.2%) in the visible wavelength region and a lower resistivity ($7.2{\times}10^{-5}{\Omega}cm$) compared with the other films. The figure of merit revealed that the ZTO/Ag/ZTO films that were electron irradiated at 700 eV had a higher optical and electrical performance than the other films prepared in this study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.888-893
• /
• 2004

The effect of irradiation and packaging methods (vacuum vs aerobic) on microbial growth, electron donating ability, and lipid oxidation in marinated beef rib (Galbi) was investigated. The total aerobic bacteria in Gazlbi reduced significantly with the increase of irradiation dose, and the effect was more significant in the Galbi with vacuum packaging, The pH showed a decreasing trend during storage and this change was more significant in the Galbi with aerobic packaging. Electron donating ability of Galbi was reduced by irradiation in aerobic packaging but no difference was found in vacuum packaging except 7 days. The 2-thiobarbituric acid reactive substances (TBARS) value of Galbi increased by irradiation in aerobic packaging during storage time, but that of vacuum packaging was maintained an initial value. Results indicated that irradiation coupled with vacuum packaging may enhance the microbial safety of Korean traditional meat products, Galbi, with minimum quality changes during storage.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.337-344
• /
• 2018

Food irradiation is important not only in ensuring safety but also improving antioxidant activity of peaches. Our objective was to establish the best irradiation treatment for peaches by calculating dose distribution using Monte Carlo simulation. 3-D geometry and component densities of peaches, extracted from CT scan, were entered into MCNP to obtain simulated dose distribution. Radiation energies for electron beam were 1.35 MeV (low energy) and 10 MeV (high energy). Co (1.25 MeV) and the Husman irradiator, containing three sealed Cs source rods in an annular array, were used for gamma irradiation. At 1.35 MeV electron beam simulation, electrons penetrated well beyond the peach skin, enough for surface treatment for microorganisms and allergens. At 10 MeV electron beam simulation, for top-beam only treatment, doses at the core were the highest and for double beam treatment, the electron energy was absorbed by the entire sample. At Co source, the radiation doses were presented on the whole area. At Cs source, the dose uniformity ratios were 2.78 for one source and 1.48 for three ones at 120 degrees interval. Proper control of irradiation treatment is critical to establish confidence in the irradiation process.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.177-187
• /
• 1988

This study was designed to investigate the effects of split irradiation on the salivary ductal cells, especially on the intercalated cells of the rat parotid glands. For this study, 24 Sprague-Dawley strain rats were irradiated on the head and neck region with two equal split doses of 9Gy for a 4 hours interval by Co-60 teletherapy unit, Picker's model 4M 60. The conditions of irradiation were that field size, dose rate, SSD and depth were 12×5㎝, 222 cGy/min, 50㎝ and 1㎝, respectively. The experimental animals were sacrificed 1. 2, 3, 6, 12, hours and 1, 3, 7, days after the irradiation and the changes of the irradiated intercalated cells of the parotid glands were examined under light and electron microscope. The results were as follows: 1. By the split irradiation, the degenerative changes of intercalated cells of the parotid glands appeared at 3 hours after irradiation and the most severe cellular degeneration observed at 6 hours after irradiation. The repair processes began from 12 hours after irradiation and have matured progressively. 2. Under electron microscope, loss of nuclear membrane, microvilli and secretory granules, derrangement of chromosomes, degeneration of cytoplasm, atrophy or reduction of intracytoplasmic organelles were observed in the intercalated ductal cells after split irradiation. 3. Under light microscope, derrangement of ductal cells, widening of cytoplasms and nuclei, hyperchromatism and proliferation of ductal cells were observed in intercalated ducts after split irradiation.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.87-94
• /
• 2013

Purpose: Pineapple is now the third most important tropical fruit in world production after banana and citrus. Phytosanitary irradiation is recognized as a promising alternative treatment to chemical fumigation. However, most of the phytosanitary irradiation studies have dealt with physiochemical properties and its efficacy. Accurate dose calculation is crucial for ensuring proper process control in phytosanitary irradiation. The objective of this study was to optimize phytosanitary irradiation treatment of pineapple in various radiation sources using Monte Carlo simulation. Methods: 3-D geometry and component densities of the pineapple, extracted from CT scan data, were entered into a radiation transport Monte Carlo code (MCNP5) to obtain simulated dose distribution. Radiation energy used for simulation were 2 MeV (low-energy) and 10 MeV (high-energy) for electron beams, 1.25 MeV for gamma-rays, and 5 MeV for X-rays. Results: For low-energy electron beam simulation, electrons penetrated up to 0.75 cm from the pineapple skin, which is good for controlling insect eggs laid just below the fruit surface. For high-energy electron beam simulation, electrons penetrated up to 4.5 cm and the irradiation area occupied 60.2% of the whole area at single-side irradiation and 90.6% at double-side irradiation. For a single-side only gamma- and X-ray source simulation, the entire pineapple was irradiated and dose uniformity ratios (Dmax/Dmin) were 2.23 and 2.19, respectively. Even though both sources had all greater penetrating capability, the X-ray treatment is safer and the gamma-ray treatment is more widely used due to their availability. Conclusions: These results are invaluable for optimizing phytosanitary irradiation treatment planning of pineapple.