• 자동차안전학회지
• /
• 제11권4호
• /
• pp.50-56
• /
• 2019

Recently, automobile industries have developed ADAS, smart cars, connected cars, automated driving systems, which use a variety of sensor systems - ultrasonics, cameras, lidars and radars - and communication systems. It is necessary to examine the electromagnetic immunity of vehicles equipped with those systems. The electromagnetic immunity tests are carried out in an electromagnetic semi anechoic chamber, which is cut off from the outside. It is difficult to create test environments in which the radar sensor systems of vehicles work properly in the test chamber. In this study, test jigs were designed and tested and as a result they are shown to be effective to create test environments for electromagnetic immunity tests of vehicles equipped with radar sensors. We also proposed additional safety standards for immunity tests of vehicles with radar systems that currently do not exist.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.7-12
• /
• 2020

Recently, automobile industries have developed ADAS, smart cars, connected cars, automated driving systems, which use a variety of sensor systems - ultrasonics, cameras, lidars and radars - and communication systems. It is necessary to examine the electromagnetic immunity of vehicles equipped with the sensor systems due to the fact that the normal operation of those systems is very important to the safety of the vehicles. The electromagnetic immunity tests are carried out in an electromagnetic semi anechoic chamber, which is cut off from the outside. It is difficult to create test environments in which the camera sensor systems of vehicles work properly in the test chamber. In this study, test jigs were designed and tested and as a result they are shown to be effective to create test environments for electromagnetic immunity tests of vehicles equipped with camera sensors. We also proposed additional safety standards for immunity tests of vehicles with camera systems that currently do not exist.

• 한국항해학회지
• /
• 제20권2호
• /
• pp.97-107
• /
• 1996

The method of Electromagnetic Wave Immunity Test is continuously endeavored by IEC and CISPR as international unification, but it has not been established yet. The main reason is why it is difficult to obtain the measurement method and normalization of threshold to find out the complicated parameters for Electromagnetic Wave immunity Test. So far, thus, the Electromagnetic Wave Immunity Test is carried out case by case as the electromagnetic environment, which is set up Electromagnetic Wave Immunity Test. This study has developed an algorithm and measurement software suitable for IEC1000-4 Regulations, where a ready-made Amplifier, and Signal Generator have been used and an interconnecting Interface Board has been constructed for connecting with the other apparatuses, i.e., RF Switch, Power Meter, Field Sensor, Pre-Amp., etc. Therefore, we have achieved the aim to develop an automated software using OOP method and the measurement system.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.14-19
• /
• 2022

Recently, automobile industries have developed ADAS, smart cars, connected cars, automated driving systems, which communicate with outsides of a vehicle not only in uni-directional way but also in bi-directional way. It is necessary to examine the electromagnetic immunity of vehicles equipped with those communication systems. The electromagnetic immunity tests are carried out in an electromagnetic semi anechoic chamber, which is cut off from the outside electromagnetically. In this study, additional test environments were designed and tested and as a result they are shown to be effective to create test environments in an experimental chamber for electromagnetic immunity tests of vehicles equipped with communication systems.

• 한국전자파학회논문지
• /
• 제24권4호
• /
• pp.436-447
• /
• 2013

본 논문에서는 IC(Integrated Circuit) 전자파 전도내성 시험 방법인 BCI(Bulk Current Injection)와 DPI(Direct Power Injection)를 이용하여 1.8 V I/O 버퍼에 대한 IC 전자파 전도내성을 시험하였다. IC 전자파 전도내성 시험을 회로 해석기를 사용하여 시뮬레이션 할 수 있는 등가회로 모델(model)을 개발하고 검증하였다. BCI와 DPI의 주파수에 따른 forward 전력을 비교한 결과는 주파수 성분에 따라 실제 IC에 도달하는 전자파(electromagnetic, EM) 노이즈의 양이 제한됨을 보여준다. 시뮬레이션을 통해, 가해지는 RF(Radio Frequency) 노이즈가 전달되는 경로의 삽입손실을 구하여, 하나의 시험 방법만으로는 넓은 주파수 영역에서 실질적인 IC 전자파 내성시험의 어려움을 발견하였다. 따라서 규정된 시험 방법을 보완하여 넓은 주파수 영역의 노이즈에 대해 신뢰도 높은 IC 전자파 전도내성 시험 방법을 제안한다.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.54-61
• /
• 2013

An equivalent model has been developed to estimate the electromagnetic immunity for integrated circuits under a complex electromagnetic environment. The complete model is based on the characteristics of the equipment and physical configuration of the device under test (DUT) and describes the measurement setup as well as the target integrated circuits under test, the corresponding package, and a specially designed printed circuit board. The advantage of the proposed model is that it can be applied to a SPICE-like simulator and the immunity of the integrated circuits can be easily achieved without costly and time-consuming measurements. After simulation, measurements were performed to verify the accuracy of the equivalent model for immunity prediction. The improvement of measurement accuracy due to the added effect of a bi-directional coupler in the test setup is also addressed.

• Journal of electromagnetic engineering and science
• /
• 제11권4호
• /
• pp.274-281
• /
• 2011

High-speed telecommunication systems are influenced by electromagnetic environments because they need a wide bandwidth to transmit signals. Immunity tests of telecommunication equipment are effective for improving its immunity to electromagnetic environments. However, immunity tests are expensive to carry out because there are several different tests. The correlation among the tests should therefore be examined in order to reduce the kinds of tests that are necessary. This paper investigates the correlation between the electrical fast transient/burst (EFTB) test and the radio frequency (RF) conductive immunity test. Imitation equipment was constructed with a balun, and a baseband signal was transmitted from the associated equipment to the imitation equipment. Then, disturbances were applied to the equipment, and the telecommunication quality was evaluated by using the bit error rate (BER). The results from the EFTB test indicated that the BER was less than $6{\times}10^{-5}$ and the value was independent of the peak value. The results from the RF conductive immunity test indicated that the BER was affected by the longitudinal conversion loss (LCL).

• 한국전자파학회논문지
• /
• 제14권8호
• /
• pp.796-802
• /
• 2003

본 논문에서는 전원주파수 자계 내성시험에 사용할 개선된 EUT(Equipment Under Test) 영상 모니터링 평가 방법을 제안하고, 실시간으로 영상 모니터링이 가능한 자동화 프로그램의 개발에 대하여 서술하였다. 제안된 평가방법에서는 전원주파수 자계 내성시험에서 전자파 영향을 받지 않은 모니터와 전자파 영향을 받은 모니터 사이의 영상의 변화를 자동화된 알고리즘에 의해 검출하여 내성 정도를 판별한다. 본 방법에서 사용된 영상변화의 실시간 판정을 위한 영상변화 검출 알고리즘은 시험의 재현성을 확보함으로써 기존의 방법인 시험자 주관적인 판단에 의한 단점을 보완하여 준다. EUT 영상의 변화 검출로 PC 모니터류에 대한 내성판정이 보다 정량적으로 가능함을 제시하였다. 또한 국제규격과 국내동향에 맞추어 EUT 내성판정법에서 정량적인 값을 도출하는 방법을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2462-2464
• /
• 1999

All electric and electronic appliances require their own electromagnetic compatibility. So an industrially advanced nations have made many standards for regulation for their profits thus the researches on the electro-magnetic shielding effect(SE) are being increased. But the SE can not proved its effect by a theory alone because of complex-material problems. This study Present the correlation of the SE and immunity of radiated radio frequency of the electromagnetic field. We have analyzed the theory of shielding effect to the shield texture. It has been proved that experimental results showed this effects have intensive relations to the electromagnetic field immunity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.202-211
• /
• 2014

The bulk current injection (BCI) and direct power injection (DPI) method have been established as the standards for the electromagnetic susceptibility (EMS) test. Because the BCI test uses a probe to inject magnetically coupled electromagnetic (EM) noise, there is a significant difference between the power supplied by the radio frequency (RF) generator and that transferred to the integrated circuit (IC). Thus, the immunity estimated by the forward power cannot show the susceptibility of the IC itself. This paper derives the real injected power at the failure point of the IC using the power transfer efficiency of the BCI method. We propose and mathematically derive the power transfer efficiency based on equivalent circuit models representing the BCI test setup. The BCI test is performed on I/O buffers with and without decoupling capacitors, and their immunities are evaluated based on the traditional forward power and the real injected power proposed in this work. The real injected power shows the actual noise power level that the IC can tolerate. Using the real injected power as an indicator for the EMS test, we show that the on-chip decoupling capacitor enhances the EM noise immunity.