• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.82-82
• /
• 1998

• 한국재료학회지
• /
• 제12권9호
• /
• pp.750-760
• /
• 2002

In this study, three solders, Sn-37Pb, Sn-3.5Ag, and Sn-3.8Ag-0.7Cu were screen printed on both electroless Ni/Au and OSP metal finished micro-via PCBs (Printed Circuit Boards). The interfacial reaction between PCB metal pad finish materials and solder materials, and its effects on the solder bump joint mechanical reliability were investigated. The lead free solders formed a large amount of intermetallic compounds (IMC) than Sn-37Pb on both electroless Ni/Au and OSP (Organic Solderabilty Preservatives) finished PCBs during solder reflows because of the higher Sn content and higher reflow temperature. For OSP finish, scallop-like $Cu_{6}$ /$Sn_{5}$ and planar $Cu_3$Sn intermetallic compounds (IMC) were formed, and fracture occurred 100% within the solder regardless of reflow numbers and solder materials. Bump shear strength of lead free solders showed higher value than that of Sn-37Pb solder, because lead free solders are usually harder than eutectic Sn-37Pb solder. For Ni/Au finish, polygonal shaped $Ni_3$$Sn_4$ IMC and P-rich Ni layer were formed, and a brittle fracture at the Ni-Sn IMC layer or the interface between Ni-Sn intermetallic and P-rich Ni layer was observed after several reflows. Therefore, bump shear strength values of the Ni/Au finish are relatively lower than those of OSP finish. Especially, spalled IMCs at Sn-3.5Ag interface was observed after several reflow times. And, for the Sn-3.8Ag-0.7Cu solder case, the ternary Sn-Ni-Cu IMCs were observed. As a result, it was found that OSP finished PCB was a better choice for solders on PCB in terms of flip chip mechanical reliability.

• Tribology and Lubricants
• /
• 제26권1호
• /
• pp.68-72
• /
• 2010

A ceramic coating is a surface treatment method that is being used widely in the industrial field, recently. Ni-P plating is also being used widely because of its corrosion resistance and low cost. An anodizing method is applicable to aluminum alloy. An anodizing method generates a thick oxide layer on the surface and then, that heightens hardness and protects the surface. These surface treatments are applied to various mechanical components and treated surfaces relatively move one another. In this study, tribological characteristics of Ni-P plating and TiAlN coating on anodized Al alloy are compared. The counterpart, anodized Al alloy, is worn out abrasively by Ni-P plating and TiAlN coating that have higher hardness. Abrasively worn debris accumulated on the surfaces of Ni-P plating and TiAlN coating, and then transferred layer is formed. This transferred layer affects the amplitude of variation of friction coefficient, which is related to noise and vibration. The amplitude of variation of friction coefficient of Ni-P plating is lower than those of TiAlN coating during the tests.

• 공업화학
• /
• 제27권2호
• /
• pp.210-216
• /
• 2016

본 연구에서는 무전해 니켈 도금 시간을 달리하여 제조한 자동차 시트용 탄소섬유 발열체의 발열 및 전기적 특성에 관하여 고찰하였다. 무전해 니켈 도금된 탄소섬유의 비저항 및 비열은 4-point probe method 및 differential scanning calorimetry (DSC)를 이용하여 분석하였으며, 표면 형상 및 표면 온도는 scanning electron microscope (SEM) 및 열화상 카메라를 이용하여 관찰하였다. 실험 결과, 도금시간의 증가에 따라 니켈 도금 두께 및 표면 온도는 증가하였으며, 반면에 비열 및 비저항은 도금시간이 증가함에 따라 감소하였다. 결과적으로 무전해 니켈 도금은 자동차 시트용 탄소섬유 발열체의 저항 발열 및 전기적 특성을 크게 향상시키는 것으로 판단된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.132-132
• /
• 2013

본 연구는 R/F-PCB(Rigid/Flexible Printed circuit Board)의 Cu Pattern에 최종 표면처리 방법으로 사용되는 ENIG(Electroless Ni/Immersion Gold) 공정을 대체하여 ECIG(Electroless Co/Immersion Gold)공정을 적용하고자 하는 것으로 무전해 니켈 도금의 장점인 고경도, 내마모성, 납땜성, 내식성을 가지면서 니켈 도금의 취약점인 연성을 개선한 도금액을 개발하고자 하였다. 개발된 도금액을 이용하여 Cu Pattern에 도금할 경우 일반 무전해 니켈 도금에서 나타나는 불량 원인 중 하나인 Space 부분에 도금이 되는 현상이 현저히 감소하였으며, 연성 또한 향상됨을 관찰할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.270-274
• /
• 2001

With Increasing importance of electroless nickel plating technology in many fields such as electronic and automobile industries, the treatment of the spent baths is becoming a serious problem. These spent baths contain iron and zinc as impurities, organic acids as complexing reagents, and phosphonate ions as oxidized species of tile reducing reagent. as well as several grams per liter of nickel. The spent baths are currently treated by conventional precipitation method. but a mettled with no sludge generation is desired. This work aims at establishing a recycling process of nickel from tile spent baths using solvent extraction. Extraction behaviors of nickel. iron. and zinc in various 쇼pes of real spent baths are investigated as a function of pH using LIX841, di (2-ethylhexyl)phosphoric acid (D2EHPA), and PC88A as tile extractants. Nickel is extracted by LIX84I at the equilibrium pH of more than 6 with high efficiency. For the weakly acid baths. iron and zinc are extracted by D2EHPA or PC88A without adjusting the pH of the baths leaving nickel in the aqueous phase. Stripping of nickel from LIX84I with sulfuric acid is also investigated. It is shown that concentrated nickel sulfate solution (> 100 ㎏-Ni/㎥) is obtained. This solution can be reused in the electroless plating process. Based on these findings, flow sheets for recovering nickel from the spent baths are proposed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 춘계학술발표회
• /
• pp.26-27
• /
• 1992

반도체 기억소자 contact hole의 선택적 충진의 최적 조건을 연구하기 위하여 무전해Ni도금방법을 채택하여 실리콘의 활성화와 선택적 도금의 공정조건이 Contact Hole 도금피막의 제반 특성에 미치는 영향을 조사하였다. p형 실리콘 100 소지 표면의 활성화 처리는 RCA처리에 의해 먼저 표면을 세척한 다음 온도, PdCl$_2$농도, 시간. 교반의 영향을 조사하였다 전처리의 최적조건은 7$0^{\circ}C$, 0.5M HF, ImM PdCl$_2$, 2mM EDTA, 90second이었다. 무전해도금은 NiS0$_4$.6$H_2O$를 DMAB를 환원제로 하여 온도, DMAB 농도, pH, 도금시간의 영향을 조사하였다. 무전해 도금 피막은 비교적 우수한 접촉저 항을 나타냈다. 1$\mu$m의 도금막을 얻는 데 본 실험조건에서 DMAB의 농도가 8mM일 때 30 분이 소요되었다. 도금막의 표면은 온도가 낮을수록 pH가 높을수록 평활하였고,특히 온도 6$0^{\circ}C$와 pH6.8에서 가장 우수하였다. 미세경도는 600Hv 정도였으며, 결정립의 크기 가 증가할수록 저항과 미세경도가 감소하였다.

• 마이크로전자및패키징학회지
• /
• 제23권3호
• /
• pp.69-75
• /
• 2016

무전해 Ni/전해Cr이중도금 구조에서 무전해 Ni의 결정화 열처리 조건이 Cr도금의 균열성장 및 Ni/Cr계면반응에 미치는 영향을 분석하였다. 비정질 무전해 Ni/전해 Cr 도금 후 $750^{\circ}C$에서 6시간 동안 1회 열처리한 시편을1단계 열처리 조건으로 정했다. 또한, 무전해 Ni도금 후 동일 열처리를 통해 결정화 시킨 후, 전해 Cr도금 후 한번 더 동일조건 열처리한 경우를 2단계 열처리 조건으로 정하여 상호 비교하였다. 두 가지 열처리 조건 모두에서 공통적으로 Ni/Cr계면에서 상호확산에 의한 Ni-Cr고용체band layer가 관찰되었다. 1단계 열처리 조건의 경우 Cr도금에 관통균열이 발생하였으며, 2단계 열처리 조건의 경우 Cr도금에 표면 미소균열만 형성되고 관통균열은 거의 발생하지 않았다. 이는 무전해 Ni도금 직후 열처리에 의해 Ni-P비정질 구조에서 Ni, $Ni_3P$상으로 결정화되면서 급격한 체적 감소가 발생하여 Cr층의 잔류응력 완화에 영향을 끼쳐서, 상부 전해 Cr도금의 관통균열 형성에 영향을 미치는 것으로 판단된다.

• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.430-436
• /
• 2011

Joining of NiO-YSZ to 316 stainless steel was carried out with B-Ni2 brazing alloy (3 wt% Fe, 4.5 wt% Si, 3.2 wt% B, 7 wt% Cr, Ni-balance, m.p. 971-$999^{\circ}C$) to seal the NiO-YSZ anode/316 stainless steel interconnect structure in a SOFC. In the present research, interfacial (chemical) reactions during brazing at the NiO-YSZ/316 stainless steel interconnect were enhanced by the two processing methods, a) addition of an electroless nickel plate to NiO-YSZ as a coating or b) deposition of titanium layer onto NiO-YSZ by magnetron plasma sputtering method, with process variables and procedures optimized during the pre-processing. Brazing was performed in a cold-wall vacuum furnace at $1080^{\circ}C$. Post-brazing interfacial morphologies between NiO-YSZ and 316 stainless steel were examined by SEM and EDS methods. The results indicate that B-Ni2 brazing filler alloy was fused fully during brazing and continuous interfacial layer formation depended on the method of pre-coating NiO-YSZ. The inter-diffusion of elements was promoted by titanium-deposition: the diffusion reaction thickness of the interfacial area was reduced to less than 5 ${\mu}m$ compared to 100 ${\mu}m$ for electroless nickel-deposited NiO-YSZ cermet.

• 한국표면공학회지
• /
• 제19권2호
• /
• pp.31-43
• /
• 1986

The properties of the electroless nickel deposit mainly depends on the pH of the bath, the plating temperature, and the molar ratio of nickel to hypophosphite but they are also affected by its formulation and concentration of complexing and buffering agents. According to changeing the concentration of triethanolamine and boric acid, phosphorous contents, microsturcture, crystalline, hardness and wear resistance of deposits obtained from ammoniacal alkaline bath were investigated by EPMA, differential thermal analyser, X-ray diffractometer and wear tester. The results are as follows; (1) Increasing concentration of triethanolamine in the bath, the deposits is slightly inclined to increase its phosphorous content(3.7% P). (2) In the as-plated state, the deposits are not crystallized state but they are thermally unstable phase, and they are crystallized with precipitating $Ni_3P$ at 400$^{\circ}C$. (3) The deposit containing 2.3% P has higher hardness value in the as plated and heat treated state at below 300$^{\circ}C$ than those of 3.7% phosphorous deposit (1090Hk). But in the case of heat treating at 400$^{\circ}C$, the former has lower hardness value (1000Hk) than the latter and has remarkably Ni(III) orientation by heat treatment. (4) The 3.7% phosphorous deposit heat treated at 400$^{\circ}C$ has better wear resistance than hard chromium plating.