• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.211-214
• /
• 2007

Development of IT and electronics industries has make our life more convenient, yet at the cost of radio communication noise, malfunctioning of electronic appliance and risks against human health all resulting from EMI. Many states are tightening their EMI (Electro Magnetic Interference) regulations around the world and the EMI regulatory measures are likely to increase in terms of targets and types. Against this backdrop, this paper aims to introduce fundamental and adequate EMI countermeasures encompassing product production cycle from design to production stage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.85-91
• /
• 2008

A Boost Power Factor Correction (PFC) Converter employing Zero Voltage Switching (ZVS) based Compound Active Clamping (CAC) technique is presented in this paper. An Electro Magnetic Interference (EMI) Filer is connected at the line side of the proposed converter to suppress Electro Magnetic Interference. The proposed converter can effectively reduce the losses caused by diode reverse recovery. Both the main switch and the auxiliary switch can achieve soft switching i.e. ZVS under certain condition. The parasitic oscillation caused by the parasitic capacitance of the boost diode is eliminated. The voltage on the main switch, the auxiliary switch and the boost diode are clamped. The principle of operation, design and simulation results are presented here. A prototype of the proposed converter is built and tested for low input voltage i.e. 15V AC supply and the experimental results are obtained. The power factor at the line side of the converter and the converter efficiency are improved using the proposed technique.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.76-81
• /
• 2011

Fossil fuel, the energy source of internal combustion engine automobiles, is limited in resource and has caused environmental issues for decades. Accordingly, automobile manufacturers from many countries around the world are developing or producing eco-friendly vehicles that utilize alternative sources of energy. These vehicles are equipped with many electronic and electrical components which operate on high voltage and/or large current that were not used in conventional combustion engine automobiles. In this paper, in order to analyze the electro-magnetic interference noise, electric vehicles and fuel cell electric vehicles are tested under the guidelines of KMVSS (Korean Motor Vehicle Safety Standards) as well as under test modes that are not stipulated under the guidelines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.652-655
• /
• 2003

This paper is about the recent development of the magnetic impact actuator for endoscope. The developed magnetic impact actuator has many problems to arrange in the system body. Because the magnetic impact actuator need a permanent magnet as an impacter, so the magnetic interference among magnets can not be eliminated. This interference causes the system size bigger. We need a new actuator design to solve these problems. One of the good solutions is to use the closed electro-magnetic circuit. This kind of circuit enhances the actuators to be independent. It is written about the design of the electro-magnetic circuit and simulation using Maxwell(version 9.0)

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.112-120
• /
• 2012

In this paper, we manufactured the wireless video stream system after we scanned EMI(Electro Magnetic Interference)noise in the system. and then, we analysed the noise frequency in the interface, circuit and PCB(Printed Circuit Board). we suggested EMI noise reduction technique. The applied reduction method is low pass filtering, the internal layer placement for high speed video data line and optimization of the system ground condition. the manufactured system improved about 2 ~ 20[dB] margin for EMI limit 40[dBuV/m] at 30 ~ 230[MHz] and 47[dBuV/m] at 230 ~ 1000[MHz].

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.84-91
• /
• 2010

Owing to revolutionary developments in automobile technologies, a variety of advanced vehicles - hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc. - emerges recently. The safety is getting more important for developing automobiles. The electro-magnetic compatibility has to be assured, since those advanced vehicles are equipped with various new electronic systems. Electro-magnetic compatibility tests, in general, consist of an EMI(electro-magnetic interference) test and an EMS (electro-magnetic susceptibility) test. We investigated the susceptibility test method suggested in KMVSS (Korean Motor Vehicle Safety Standard) as the EMS test method. A series of experiments results that the above test method should be partially revised to comply with a Korean governmental standard method. In this paper, the some directions of modifications are presented to enhance the quality of the above EMS test method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.38-42
• /
• 2001

우리나라는 1968년 이후에 154kV급 송전 계통망을 비접지 방식에서 직접 접지방식으로 변경함에 따라, 전력선의 1선 지락고장시 송전선으로부터 지락전류 즉, 고장전류가 크게 되어 이 결과 송전선 주변에 있는 통신선에 유도문제가 발생하게 되었다. 본 논문에서는 전력선에 의한 통신선측의 유도전압 예측계산식을 제시하고, 유도예측 계산치가 일정 기준을 초과할 경우, 통신선측과 전력선측에서 강구할 수 있는 대책방안에 대해 소개하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1049-1057
• /
• 2017

In-vehicle multimedia systems are one of the most important factors in the automotive industry. Especially, multimedia systems are more important in advanced commercial vehicles such as premium express buses. In this paper, we proposed a multimedia streaming system architecture using MEP(MOST Ethernet Packets) for premium express buses based on MOST150. We have designed and implemented the prototype of proposed multimedia streaming system. We have designed a board based on i.MX6 to operate a proposed multimedia streaming system. The software has designed a multimedia system for premium express buses based on Android which is an open source platform. MOST(Media Oriented Systems Transport) is a high-speed multimedia network technology for in-vehicle multimedia system. The MOST network is able to manage up to 64 devices and ring topology is used basically. In addition, the MOST Network meets EMI(Electro-Magnetic Interference)/ EMC(Electro-Magnetic Compatibility) requirements because it uses plastic optical fibers(POF).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.102-107
• /
• 2012

In this study, the design procedure of hybrid active mount by an electro-magnetic actuator is proposed to reduce the transmitted force from naval shipboard equipment to ship hull structure. The hybrid type mount which is composed of a passive rubber element and an electro-magnetic actuator is introduced and, through the vibration measurement for the objective pump system, the required force of the actuator is computed and discussed in detail. The initial designs were supposed for three types, one is moving coil type actuator and the others are moving permanent magnet type actuators. Based on the initial design concept, the final designs considering shock resistance and interference with mover and stator are proposed and examined.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.13-17
• /
• 2016

EMC (Electro Magnetic Compatibility) of the electrical railway must be ensured for safety of passenger. Maglev trains has not friction between the wheels and the rails because levitation by an permanent magnets, electromagnets and superconducting magnets etc. So, it is advantageous to maintain a high speed without noise and vibrations. In this paper, we investigated that the magnetic field of the before and after installation electromagnetic waves absorber in order to analyze the effects of electromagnetic waves. The theoretical analysis of the electromagnetic wave absorber was simulated using finite element method. The magnetic field properties of electromagnetic waves absorber were measured by EMI (Electro Magnetic Interference) test receiver.