• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.211-214
• /
• 2007

Development of IT and electronics industries has make our life more convenient, yet at the cost of radio communication noise, malfunctioning of electronic appliance and risks against human health all resulting from EMI. Many states are tightening their EMI (Electro Magnetic Interference) regulations around the world and the EMI regulatory measures are likely to increase in terms of targets and types. Against this backdrop, this paper aims to introduce fundamental and adequate EMI countermeasures encompassing product production cycle from design to production stage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.85-91
• /
• 2008

A Boost Power Factor Correction (PFC) Converter employing Zero Voltage Switching (ZVS) based Compound Active Clamping (CAC) technique is presented in this paper. An Electro Magnetic Interference (EMI) Filer is connected at the line side of the proposed converter to suppress Electro Magnetic Interference. The proposed converter can effectively reduce the losses caused by diode reverse recovery. Both the main switch and the auxiliary switch can achieve soft switching i.e. ZVS under certain condition. The parasitic oscillation caused by the parasitic capacitance of the boost diode is eliminated. The voltage on the main switch, the auxiliary switch and the boost diode are clamped. The principle of operation, design and simulation results are presented here. A prototype of the proposed converter is built and tested for low input voltage i.e. 15V AC supply and the experimental results are obtained. The power factor at the line side of the converter and the converter efficiency are improved using the proposed technique.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.76-81
• /
• 2011

Fossil fuel, the energy source of internal combustion engine automobiles, is limited in resource and has caused environmental issues for decades. Accordingly, automobile manufacturers from many countries around the world are developing or producing eco-friendly vehicles that utilize alternative sources of energy. These vehicles are equipped with many electronic and electrical components which operate on high voltage and/or large current that were not used in conventional combustion engine automobiles. In this paper, in order to analyze the electro-magnetic interference noise, electric vehicles and fuel cell electric vehicles are tested under the guidelines of KMVSS (Korean Motor Vehicle Safety Standards) as well as under test modes that are not stipulated under the guidelines.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.652-655
• /
• 2003

This paper is about the recent development of the magnetic impact actuator for endoscope. The developed magnetic impact actuator has many problems to arrange in the system body. Because the magnetic impact actuator need a permanent magnet as an impacter, so the magnetic interference among magnets can not be eliminated. This interference causes the system size bigger. We need a new actuator design to solve these problems. One of the good solutions is to use the closed electro-magnetic circuit. This kind of circuit enhances the actuators to be independent. It is written about the design of the electro-magnetic circuit and simulation using Maxwell(version 9.0)

• 한국ITS학회 논문지
• /
• 제11권4호
• /
• pp.112-120
• /
• 2012

본 논문에서는 무선으로 비디오를 데이터 전송하여 접근하는데 필요한 스트림 시스템을 구현하여 시스템 내에서 발생하는 EMI(Electro Magnetic Interference) 잡음을 각 인터페이스, 회로 그리고 PCB(Printed Circuit Board) 상에서 주파수 대역별로 분석하였고 각각 기능 블럭에 대한 잡음 개선 방안을 제시하였다. 개선방안으로 저역통과 대역 필터링, 고속 데이터 라인들의 내층 배선, 그라운드의 최적화를 수행하였다. 구현된 시스템은 EMI 규제치 30 ~ 230[MHz]대역과 230 ~ 1000[MHz]대역에서 각각 40[dBuV/m]와 47[dBuV/m]내로 약 2 ~ 20[dB] 마진을 확보하여 잡음 개선을 하였다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.84-91
• /
• 2010

Owing to revolutionary developments in automobile technologies, a variety of advanced vehicles - hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc. - emerges recently. The safety is getting more important for developing automobiles. The electro-magnetic compatibility has to be assured, since those advanced vehicles are equipped with various new electronic systems. Electro-magnetic compatibility tests, in general, consist of an EMI(electro-magnetic interference) test and an EMS (electro-magnetic susceptibility) test. We investigated the susceptibility test method suggested in KMVSS (Korean Motor Vehicle Safety Standard) as the EMS test method. A series of experiments results that the above test method should be partially revised to comply with a Korean governmental standard method. In this paper, the some directions of modifications are presented to enhance the quality of the above EMS test method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
• /
• pp.38-42
• /
• 2001

우리나라는 1968년 이후에 154kV급 송전 계통망을 비접지 방식에서 직접 접지방식으로 변경함에 따라, 전력선의 1선 지락고장시 송전선으로부터 지락전류 즉, 고장전류가 크게 되어 이 결과 송전선 주변에 있는 통신선에 유도문제가 발생하게 되었다. 본 논문에서는 전력선에 의한 통신선측의 유도전압 예측계산식을 제시하고, 유도예측 계산치가 일정 기준을 초과할 경우, 통신선측과 전력선측에서 강구할 수 있는 대책방안에 대해 소개하고자 한다.

• 한국통신학회논문지
• /
• 제42권5호
• /
• pp.1049-1057
• /
• 2017

차량용 멀티미디어 시스템은 자동차 산업에 있어서 매우 중요한 요소 중 하나이다. 특히, 프리미엄 고속버스와 같은 고급상용차에서의 멀티미디어 시스템은 더욱 중요하다. 우리는 본 논문에서 MOST150을 기반으로 MEP(MOST Ethernet Packets)을 이용해 프리미엄 고속버스용 멀티미디어 시스템 구조를 제안했고, Prototype을 설계 및 구현했다. 제안한 시스템 구조를 구현하기 위해 멀티미디어 시스템이 운용될 수 있는 I.MX6기반의 Board를 설계했다. 소프트웨어는 Open Source Platform인 Android를 기반으로 프리미엄 고속버스용 멀티미디어 시스템을 설계했다. MOST는 고속의 멀티미디어 네트워크 기술이며, 차량의 멀티미디어시스템 설계에 사용된다. 기본적으로 링 토폴로지(Ring Topology)를 사용하고, 최대 64개의 MOST 장치를 연결할 수 있다. 또한 MOST 네트워크는 광모듈(POF)을 이용해 통신하기 때문에 EMII(Electro-Magnetic Interference) 및 EMC(Electro-Magnetic Compatibility) 요구조건을 충족한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.102-107
• /
• 2012

In this study, the design procedure of hybrid active mount by an electro-magnetic actuator is proposed to reduce the transmitted force from naval shipboard equipment to ship hull structure. The hybrid type mount which is composed of a passive rubber element and an electro-magnetic actuator is introduced and, through the vibration measurement for the objective pump system, the required force of the actuator is computed and discussed in detail. The initial designs were supposed for three types, one is moving coil type actuator and the others are moving permanent magnet type actuators. Based on the initial design concept, the final designs considering shock resistance and interference with mover and stator are proposed and examined.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.13-17
• /
• 2016

EMC (Electro Magnetic Compatibility) of the electrical railway must be ensured for safety of passenger. Maglev trains has not friction between the wheels and the rails because levitation by an permanent magnets, electromagnets and superconducting magnets etc. So, it is advantageous to maintain a high speed without noise and vibrations. In this paper, we investigated that the magnetic field of the before and after installation electromagnetic waves absorber in order to analyze the effects of electromagnetic waves. The theoretical analysis of the electromagnetic wave absorber was simulated using finite element method. The magnetic field properties of electromagnetic waves absorber were measured by EMI (Electro Magnetic Interference) test receiver.