• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권9호
• /
• pp.2419-2435
• /
• 2023

Command and control networks(C2N) exhibit evident multi-network interdependencies owing to their complex hierarchical associations, interleaved communication links, and dynamic network changes. However, the existing command and control networks do not consider the effects of dependent nodes on the load distribution. Thus, we proposed a command and control networks load allocation strategy based on interdependence strength. First, a new measure of interdependence strength was proposed based on the edge betweenness, which was followed by proposing the inter-layer load allocation strategy based on the interdependence strength. Eventually, the simulation experiments of the aforementioned strategy were designed to analyze the network invulnerability with different initial load capacity parameters, allocation model parameters, and allocation strategies. The simulation indicates that the strategy proposed in this study improved the node survival rate of the interdependent command and control networks model and successfully prevented cascade failures.

• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.36-40
• /
• 2002

The polar anchoring strength and surface ordering in a NLC,4-n-pentyl-4'-cyanobiphenyl (5CB), on a rubbed polyimide (PI) surface containing trifluoromethyl moiety were studied. The large extrapolation length de of 5CB for washing process of water was measured at RS=114 mm. The polar anchoring energy of 5CB on the rubbed PI surface is decreased by the washing process. Also, the polar anchoring energy of 5CB increases with the rubbing strength on the PI surface. The surface ordering of 5CB for all washing processes is smaller than the non-washing process; it is attributed to the washing process.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1159-1165
• /
• 2005

New conductor is developed by using high strength nonmagnetic steel(NM) wire as the core of overhead conductor This conductor is called ACNR overhead conductor(Aluminum Conductor Nonmagnetic Steel Reinforced). Formed by the combination of aluminum alloy wire and high strength nonmagnetic steel wire, it has about the same weight and diameter as conventional ACSR overhead conductor. To enhance properties beneficial in an electrical and mechanical conductor during the Process of high strength nonmagnetic steel wire, we made a large number of improvements and modifications in the working process, aluminum cladded method, and other process. ACNR overhead conductor, we successfully developed, has mechanical and electrical properties as good as or even better than conventional galvanized wire. Microstructure of raw material NM wire was austenite and then deformed martensite after drawing process. Strength at room temperature is about $180kgf/mm^2\~200kgf/mm^2$. The conductivity at 0.78 mm thickness of Aluminum cladded M wire is about $7\%$ IACS higher than $20\%$IACS of HC wire used as core of commercial ACSR overhead conductor. The corrosion resistance is about 3 times higher than that of HC wire.

• 대한정형도수물리치료학회지
• /
• 제14권1호
• /
• pp.31-38
• /
• 2008

Purpose : The purpose of this study was to compare the effectiveness of both neuromuscular electrical stimulation(NMES) and isometrical exercise(IE) to strengthen the quadriceps femoris muscle. The relationships between the strength changes and the relative force and duration of training contractions were also studied. Methods : The subjects were divided into three group. The control group(n=6) received no exercise and/or stimulation. The isometric exercise (IE) group(n=6) performed maximum isometric contractions, and the neuromuscular electrical stimulation(NMES)(n=6) engaged electrically stimulated isometric contractions, three days a week for four weeks. Results : Results showed that both IE group and NMES group were found to have an increase in strength significantly greater(p<0.05) than the control group at 4 week. But between IE group and NMES group were not found to have an difference in strength significantly. Conclusion : The relative increase in isometric strength, using IE and NMES, may be determined by the ability of the subjects to tolerate longer and more forceful contractions. Suggestions for further research and implications for the clinical of IE and NMES for strength-training are discussed.

• 센서학회지
• /
• 제33권2호
• /
• pp.86-92
• /
• 2024

Flexible electronic devices are exposed to repeated mechanical deformation; therefore, electrode performance is an important element. Recently, a new technology has been developed to improve the adhesion strength between polymer substrates and metal thin films through the cross-linking reaction of bovine serum albumin (BSA) bioconjugation proteins; however, additional performance evaluation as an electrode is necessary. Therefore, in this study, we investigated the effect of adhesive strength between a flexible substrate and a metal thin film on the performance of a flexible electrode. Cracks and changes in the electrical resistance of the electrode surface were observed through outer bending fatigue tests and tensile tests. As a result of a bending fatigue test of 50,000 cycles and a tensile test at 10% strain, the change in the electrical resistance of the flexible electrode with a high adhesion strength was less than 40%, and only a few microcracks were formed on the surface; thus, the electrical performance did not significantly deteriorate. Through this study, the relationship between the adhesion strength and electrical performance was identified. This study will provide useful information for analyzing the performance of flexible electrodes in the commercialization of flexible electronic devices in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.242-245
• /
• 2000

The fiber contributes the high strength and modulus to the composite. The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. In this study, FRP was made unidirectionally by pultrusion method and outer part of FRP was made by filament winding method to give fiber orientation to the FRP. The bending strength and bending stresses of FRP rods were simulated according to the winding orientation of glass fiber. The bending strength of FRP was also evaluated. The results of simulation and evaluation Were compared each other to investigate main stresses which affect the fracture of FRP. The main stresses which had a great effect on the strength of FRP were shear stresses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1633-1635
• /
• 1999

In this study, we evaluated the dependence of thickness and temperature in the breakdown strength of MDPE and effect of semiconductor. As the result, breakdown strength trend to decrease according to the increase of thickness and temperature. We obtained the result that the breakdown strength was a little lower in the structure of Semi/MDPE than Semi/MDPE/Semi, but breakdown strength of MDPE was greater both of all. The dependency of permittivity, tan ${\delta}$ and conductance on frequency and temperature were investigated. Both of the specimans showed the trend of decreased in permittivity as the temperature increased but increase as the frequency increased.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.95-100
• /
• 2012

In this study, a novel Cu composite sheet with embedded high electric conduction path was developed as another alternative for the interconnect materials possessing high electrical conductivity as well as high strength. The Cu composite sheet was fabricated by forming Ag conduction paths not within the interior but on the surface of a high strength Cu substrate by damascene electroplating process. As a result, the electrical conductivity increased by 40% thanks to mesh type Ag conduction paths, while the ultimate tensile strength decreased by 20%. The interfacial fracture resistance of Cu composite sheet prepared by damascene electroplating increased by above 50 times compared to Cu composite sheet by conventional electroplating. For feasibility test for practical application, a leadframe for LED module was manufactured by a progressive blanking and piercing processes, and the blanked surface profile was evaluated as a function of the volume fraction of Ag conduction paths. As Ag conduction path became finer, pressing formability improved.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.61-69
• /
• 2006

The tensile strength of an overhead transmission line's conductor in response to an aging is being assessed in this paper. It is our view that, the decrement in the conductor's tensile strength is a key index that can be used to determine a conductor's end of life and a current limits. This paper describes a probabilistic method of assessing this index for main transmission lines which are responsible for the north bound power flow in the Seoul metropolitan area. Such an assessment can be a useful guide for economic system operation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.776-779
• /
• 2001

The main objective of this paper is to design and mechanical strength analysis of UHV(Ultra High Voltage) suspension insulator. One of the important properties required for suspension insulators is mechanical strength under tensile load. The cement and porcelain part are express according to change of pin head type an aspect mechanical stress. These insulators are designed and produced by using the computer analysis of mechanical, electrical and electrical stresses together with the technical know-how accumulated from long years of study into every respect of insulators.