• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.253-255
• /
• 1999

We measured stand-by power of electrical machinery and appliance which are used at office and house. And we estimated potential electrical energy saving through stand-by power and the expecting number of supplied apparatus. As a result, We can reduce electrical energy by minimizing a stand-by power consumption up to three billion kWh which are equal to about 1/3 of an atomic power plant's generating power of 1 year.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1054-1059
• /
• 2005

The artificial potential method uses a potential field to guide a robot from a start to a goal configuration respectively. The potential field consists of attractive potential used to pull a robot toward a goal and repulsive potential to keep it away from obstacles. However, there are two problems concerning local minimum and computational cost to be resolved in conventional artificial potential methods. This study proposes a method utilizing a spline surface that interpolates arbitrary boundaries and a domain reduction method that reduces the unnecessary area. The proposed spline surface interpolates arbitrary shaped boundaries and is used as an artificial potential to guide a robot for global motion planning of a mobile robot. A reduced domain process reduces the unnecessary domain. We apply a distance-weighted function as such a function, which blends distances from each boundary with a reduction in computational time compared with other analytical methods. As a result, this paper shows that an arbitrary boundary spline surface provides global planning and a domain reduction method reduces local minimum with quick operation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.345-346
• /
• 2007

In this study, an experimental method to be able to induce the evoked potential which was reflecting the activity of brain was designed, when the electromagnetic wave was exposed at human or not. The influence of the electromagnetic wave on each component of the evoked potential was discussed. Each component of N100, P100, N200, P300 and so on of the evoked potential was measured in the designed experimental method, And it was observed that the difference existed at each component when the electromagnetic wave was exposed and not exposed.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.487-493
• /
• 1990

A complete potential profile of an electrical double layer is calculated from a distribution function of charged particles based upon a model where the effect of a charged electrode and the finite size of ion are explicitly included. Electrons which are distributed on the electrode surface are assumed not to penetrate the electrode/electrolyte boundary. Formation of the constant density regions and their effects on potential and the electrical double layer capacitances are studied in great detail. The distribution of surface electrons as well as the constant density regions are found to be essential in characterizing the electrical double layer. The introduction of the ion size into the prior electrical double layer model of an ideally polarizable electrode/point charged electrolyte system, shows a great improvement in its characteristics mostly at negative potential region.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.1
• /
• pp.50-58
• /
• 2011

In this paper, potential distribution analysis through the six kinds of case studies examined in the environmental conditions change within a limited space, by the power supply system installed. To interpret the potential distribution using electromagnetic field analysis program and the parameters were state of the ground, the outer wall of the configuration state and the presence of human potential distribution was simulated. Potential distribution analysis, the size of nominal voltage, depending on the impedance of human body to be determined on the impact of surprise decision, but if equipped with appropriate protective equipment can be protected from lightning have been confirmed.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1718-1720
• /
• 1997

This paper deals with n rise in electric potential of telecommunication line for electric power system by lightning surges. When $1.2/50{\mu}s$ and $8/20{\mu}s$ impulse voltage and current were applied on telecommunication cable, the voltage waveforms at the end terminal and equipment were measured. The telecommunication lines, which consist of 60 conductors and 3.5km in length, have some surge protectors such as preposition lightning arrester and TVSS. In each case, the rise in electric potential was measured for differential mode and common mode, respectively. Also, the rise in ground potential and the induced voltages were measured and analyzed. As a result, a significant rise in ground potential was observed for lightning surge. It can cause failure or malfunction of telecommunication systems.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.404-409
• /
• 2004

The electrical contact resistance is here estimated using the multiscale microcontact distribution of elastic contact between rough surfaces, simulated from the Archard's model, and the electrical contact conduction theory suggested by Greenwood. These analysis confirms that the electrical contact resistance is converged to a values, larger than would be obtained if the contact spots were widely separated and hence independent. In multiscale process, the base potential is close to the value of the potential difference between the contact surface and the extremity of body, suggesting a possibility to obtain the multiscale electrical contact resistance relations.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1508-1510
• /
• 1998

Recent development of scanning probe microscope techniques has made it possible to investigate, not only microscopic surface topography, but also physical and chemical properties on the nanometer-scale. The scanning Maxwell-stress microscopy (SMM) is surface characterization tool capable of mapping both the surface topography and electrical properties, such as surface potential, surface charge dielectric constant of thin films with a nanometer-scale resolution by means of the AC voltage driven oscillation of metal coated cantilever. In this study, we observed the surface potential distribution and molecular ordering in thin films. We have demonstrated that the SMM can be used for imaging surface potential distribution over the film surface and also be used for detecting surface changes in thin films. This is first step towards the understanding of electrical phenomena in organic and inorganic materials, biological system with SMM.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.172-179
• /
• 2000

Objectives : Assuming that the characteristic of meridian system has been similar to this of electric potentials in human body and that measurements of electric potential at well(井穴) and sea(合穴) points in branches of the twelve meridians will be representative of measurements of the twelve meridians, to measure the electric potentials in three patient groups with arrhythmia(AP group), with arrhythmia and cerebral infarction(CI group), and with arrhythmia and hemorrhage(CH group), and then to find out the characteristic of meridian system among 3 groups. Methods : Thirty arrhythmic patients diagnosed by EKG, CT, and deficiency of the heart blood(心血虛症) were divided into 3 groups(AP, CI, CH group). Their electric potential of well and sea points in the meridians were measured 3 times by physiograph. Results : Measurements were analyzed by statistical factor analysis, we obtained that the left side electric potential of well and sea points in branches of the twelves meridians in AP group was divided into two factors, which were the hand meridian without the lung meridian, the foot meridian and the lung meridian, but the right side electric potential was divided into the hand and the foot meridian. In CH group both the left and the right side electric potential was divided into three factors. In CI group the left side electric potential was divided into three factors, but the right side electric potential was divided into two factors. Conclusions : In conclusion, their electrical potentials were different each other among 3 groups. Thus electrical potentials of well and sea points might be the representative meridian to show their characteristics.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.48-52
• /
• 2004

Recently, there are many electricity, electronics, and communication equipment which need to earthing in the building. When electric current flows into a certain earthing system in the same building, the potential of other earthing system rises. This potential interference repuire surface potential of electrodes by electrode shape. In this paper basic formula is deduced on the basis of both electrodes surface potential of earth electrode as a source of the potential interference and earth electrode which receive the potential interference. The degree of potential interference as multiple earth electrode is verified the simulated results by means of the simple model in advance.